Top Industrial Ethernet Poe Injector 24v

iCreatin 2-Pack Wall PoE Injector Power Over Ethernet Adapter 802.3af 48V 24W 0.5A for Security IP Cameras IP Phones, 10/100Mbps

  • Raspberry Pi 3B+ can work with this poe injector after installed this PoE hat or micro USB PoE Splitter.
  • This injector lets you power 802.3af compatible devices, with no additional adapter needed. Just plug the network cable(not included) into your network switch and into the “Data In” port, then plug the cable to your device into the “PoE” port with your existing network cable.
  • This Adapter support 10/100/1000Mbps gigabit ethernet connection, RJ45 PoE port using 4,5,7,8 pin as power transfer, Please do not connect any device that does not support the “PoE” port, this will damage your device.
  • This is an 802.3af compatible device, but it does NOT include the 802.3af/802.3at compliant detection feature. It supplies power NO MATTER WHAT, so don’t plug the “PoE” side into anything that isn’t ready for it.
  • Compatible all 802.3af PoE power device as IP Phone, IP camera, Gateway , Switch, or More…...
Check Stock

Mikrotik OmniTIK 5 PoE ac 7.5dBi Gb Ethernet Ports Access Point Omni Antennas

  • OmniTIK 5 PoE ac also known as RBOmniTikPG-5HacD features five Gigabit Ethernet ports and support for 802.11ac.
  • It’s equipped with a powerful 720MHz CPU, 128MB RAM, high power 802.11a/n/ac Dual Chain wireless (support for AC as well as backwards compatible with regular 802.11a/n CPE).
  • The OmniTIK 5 PoE ac comes with a new design weatherproof outdoor enclosure, two integrated 7.5dBi 5GHz omni antennas, a power supply, a PoE injector and a mounting kit.
  • It also supports passive or standard 802.3at/af PoE input/output. Ethernet ports 2-5 can power other PoE capable devices with the same voltage as applied to the unit.
  • Size of RAM: 128 MB / CPU nominal frequency: 720 MHz / Storage size: 16 MB / Dimensions: 416 x 129 x 58 mm.
Check Stock

Mikrotik wAP 60Gx3 AP WLAN Access Point Power Over Ethernet (PoE) White

  • OmniTIK 5 PoE ac also known as RBOmniTikPG-5HacD features five Gigabit Ethernet ports and support for 802.11ac.
  • It’s equipped with a powerful 720MHz CPU, 128MB RAM, high power 802.11a/n/ac Dual Chain wireless (support for AC as well as backwards compatible with regular 802.11a/n CPE).
  • The OmniTIK 5 PoE ac comes with a new design weatherproof outdoor enclosure, two integrated 7.5dBi 5GHz omni antennas, a power supply, a PoE injector and a mounting kit.
  • It also supports passive or standard 802.3at/af PoE input/output. Ethernet ports 2-5 can power other PoE capable devices with the same voltage as applied to the unit.
  • Size of RAM: 128 MB / CPU nominal frequency: 720 MHz / Storage size: 16 MB / Dimensions: 416 x 129 x 58 mm.
Check Stock

XM1000pro

  • 【PoE & IP OVER COAX CONVERTER】LINOVISION’s POE IP Over Coax converter can be used to upgrade analog system to IP surveillance system while using existing coaxial cable. Compatible with RG59, RG6 cables. Supports POE standards 802.3af (PoE) and 802.3at (PoE+). EOC Receiver should be powered by POE switch or POE injector while Transmitter should be connected with POE devices or NON-POE devices.
  • 【LONG REACH POE TRANSMISSION】Up to 100Mbps in 300m (1000ft) RG59 cable transmission, max 1000m (3000ft) distance in 10Mbps, working with CCA/CCU RG59/RG6 cable. Support POE power transmission with load capacity 11W over 300m (1000ft) transmission, working with POE IP camera, VoIP phone, POE WiFi AP.
  • 【INDUSTRIAL DESIGN WITH BUILT-IN HEAT SINK】Industrial design, with built-in heat sink, ensure super reliability and hassle free transmission. Indoor use ONLY. Plug-and-play, configuration free, makes installation simplest. Small design (3.1"x2.0"x0.9") and light weight.
  • 【POINT TO POINT CONNECTION ONLY】Act as MoCA (Multimedia over Coax) in point-to-point connection, transmit video/audio/data/control signal over coaxial cable.
  • 【WORRY FREE】1 year warranty, US local technical support + Global after-hour support..
Check Stock

PoE Texas 802.3af Power Over Ethernet PoE Splitter with 5 Volts 10 Watts Output - for 5V Non-PoE Security Camera and Devices Like Foscam Sonoff Tablet USB Dropcam Raspberry Pi and Others

  • 802.3af Power over Ethernet PoE Splitter / Converter for 5 volt non-PoE devices. Extend power up to 328 feet away from a PoE switch. Features....
  • 5v 10w PoE splitter compatible with non-PoE Security Cameras, Tablets, Raspberry Pi, Smart Home Devices, Foscam, Dropcam, Sonoff PTZ cam. The 1.35mm x....
  • This Power over Ethernet splitter converts and 'splits' 44-56v PoE into 5 volts, 10 watts of power on its DC barrel with divided 10/100/1000 gigabit....
  • Requires an IEEE 802.3af PoE switch or 802.3af PoE Injector (sold separately). Functions as a PoE splitter for 5v devices while delivering lightning....
  • All PoE Texas products are backed by a One Year replacement warranty and a 30 Day, no questions asked, return policy. Expert help is only a phone call....
Check Stock

LINOVISION Industrial 8-Port Full Gigabit Solar POE Switch with DC12V/DC24V to DC48V Voltage Booster, IEEE802.3at with Total POE Budget 240W, POE Power Supply for Solar Power/RV Truck/VoIP Systems

  • DC12V ~ DC48V POE VOLTAGE BOOSTER - Supply standard IEEE802.3af/at POE power with DC12V/DC18V/DC24V/DC36V/DC48V input.
  • 8-PORT FULL GIGABIT POE SWITCH - Providing 8*10/100/1000Base-T Ethernet PoE ports and 2*1000Base-X SFP slots (Fiber module is not included). Each POE ports are compliant to IEEE802.3af/at standard. It supports one-key fast ring fiber network and broadcast storms protection (BSP).
  • INDUSTRIAL DESIGN FOR HARSH ENVIRONMENT - Fanless design and wide working temperature (-40℃ ~ 75℃ or -40 ℉ ~167 ℉).
  • POE WATCHDOG - Realtime monitoring POE load device's status and will automatically reboot POE port when the connected device is not active. It proivdes non-stop running of POE device, like security cameras, IP speakers and IP phones.
  • TOTAL 240W POE BUDGET - Up to 30W per POE port, and total 240W POE budget (DC48V input), or 120W (DC24V input), or 80W (DC12V input).
  • NON-STOP POE SUPPLY WITH DUAL POWER INPUT - Support 2 channel DC12V-48V redundant power inputs and auto failover, ensure high reliability networking system.
  • APPLICATION - For solar power system, vehicle, RV, VoIP IP phone system, robust fiber ring network.
Check Stock

MokerLink 11 Port Gigabit PoE Switch with 8 PoE+ Port, 2 Gigabit Uplink, 1 SFP Port, 120W AI Detection, Qos, Fanless Metal Plug & Play Unmanaged Network Switch

  • 11 Gigabit PoE Ports: Includes 8 Gigabit POE ports, 2 Gigabit Uplink and 1 SFP Port, all ports support gigabit rate(1000Mbps), With excellent data exchange performance, the SFP port can be connected to optical fiber, suitable for long-distance transmission greater than 100 meters..
  • High POE Power: Maximum support 120W high output power, built-in power supply makes installation easier. Support IEEE 802.3af/at, each port max power supply reached 30W. *Please note: not support passive 24V PoE.*.
  • Plug & Play, AI Detection: Just plug in the power cord, connect the ethernet cable to the PoE device, can be used without configuration. AI intelligent detection, automatic detection of port data, if disconnected, automatically restart the port device, ensure stable operation and worry-free maintenance.
  • Qos: The port 1-2 support Qos function, can connect important network device to these 2 ports, when network congestion occurs, it will be protected first to prevent data loss.
  • Widely Used: Built-in Industrial Power Supply. Durable Metal housing. LED indicator lights. Widely used in IP cameras, Wireless Access Point, Computer Networks etc. Any questions please contact us, we will provide the best support..
Check Stock

MokerLink 6 Port PoE Switch with 4 Ports PoE+, 2 Fast Ethernet Uplink, 10/100Mbps, 78W High Power, Support IEEE802.3af/at, Fanless Metal Plug & Play PoE+ Network Switch

  • 6 Ports: Includes 4 POE ports and 2 UpLink ports, all ports up to 10/100Mbps speed. The 2 uplink ports can be connected to different networks or devices, such as routers, NVRs, etc..
  • High POE Power: Maximum support 78W high output power, built-in power supply makes installation easier. Support IEEE 802.3af/at, each port max power supply reached 30W. *Please note: not support passive 24V PoE.*.
  • Unmanaged Plug & Play: Support Power Detection function, automatically detect devices, can be compatible with non-POE devices to provide data connectivity. Plug and Play, just plug in the power cord, connect the ethernet cable directly to the device, can be used without configuration..
  • Extend function: When turn on the extend mode, the POE port can be extended to 250 meter distances and 10Mbps speed, and ports are isolated from each other, improve the network safety..
  • Widely Used: Built-in Industrial Power Supply. Durable Metal housing. LED indicator lights. Widely used in IP cameras, Wireless Access Point, Computer Networks devices, etc. 100% Satisfaction Guarantee – 30-day Money-Back Guarantee with 1 Year Warranty..
Check Stock

MokerLink 48 Port PoE Gigabit Managed Switch, 4x1G SFP, IEEE802.3af/at/bt 600W, VLAN/Qos/PoE/Security Web/Cli L2 Managed Rackmount Switch

  • Gigabit Ports: 48 gigabit ethernet ports, 4 gigabit SFP, switching capacity is 256Gbps, each port can reach 1G rate at the same time, with higher data throughput. 16K Mac address table, more devices can be connected and can be used in large networks.
  • High POE Power 600W: Ports 1-4 support IEEE802.3af/at/bt, max 90W. Ports 5-48 support IEEE802.3af/at, max 30W. Built-in power supply, the whole machine supports 600W. *Please note: it will not supply power to passive 24V PoE and NON-PoE devices.*..
  • Web Managed: Support POE port and Layer 2 management, such as VLAN, Port Aggregation/Mirroring/Isolation, Speed Limitation, Flow Control, Qos, Port Security, Spanning Tree, Multicast, DoS defend, Storm control, DHCP Snooping. Support WEB/Cli/SNMP..
  • Smart Heat Dissipation: Using 2 industrial-grade fans, intelligent design, automatic start and stop according to the power used, automatic adjustment of the speed, more energy saving and extended use time.
  • Widely Used: Support status query, port statistics, fault detection, easy to maintenance and management. Durable Metal housing, 1U rackmout, widely used in home/business/project PoE network. Any usage questions please contact our technical support.
Check Stock

REOLINK RJ45 Cat-5 Network Ethernet Patch Internet Cable - 60 Feet PoE IP Cameras, PoE Security Camera System

  • Transmit Power And Signal Via Only One Cable: Save your time and energy from the bothersome installation of Reolink IPCs and other Ethernet devices..
  • Plug And Play: Enjoy your Reolink cameras all in one minute. Just plug this cable into a POE injector or Reolink NVR then you can access Reolink cameras on your Reolink app..
  • High Compatibility: This Ethernet cable not only perfectly suits all Reolink POE cameras and NVRs, but also adopts T-568B connectors to provide safe and stable transmission for other POE devices..
  • Outstanding Quality: No need to worry about dust or rain with the IP66 Weatherproof. High wear and bending resistance make it superior for outdoor use..
Check Stock

PoE Texas GPOE-6AB | 6-Port Gigabit Poe Injector for 802.3af or 24 Volt Passive Devices | Power Supplies Available Seperately

  • Instantly upgrade your network switch or router to PoE using this 6 Port PoE midspan injector.
  • Use to power IP Phones, Access Points, IP cameras that require 10/100 or Gigabit Data.
  • Passive “always on” power and data delivery options for Mode A or Mode B compatible with IEEE 802.3af or 24 volt passive PoE devices.
  • Power Supply NOT included - use with a UL certified 24v 48v or 56v power supply.
  • Backed by 1 year warranty - For expert technical support from Austin, TX please call 512 479 0317.
Check Stock

TRENDnet 65W 4-Port Gigabit PoE+ Injector, TPE-147GI, 4 x Gigabit Ports(Data in), 4 x gigabit PoE Ports(Data + PoE Out), Multi-Port PoE+ Injector up to 100m(328 ft.), Add PoE+ Power to Non-PoE Switch

  • GIGABIT PORTS 4 x gigabit ports (data in) and 4 x gigabit PoE ports (data + PoE out).
  • EASY INSTALLATION No configuration needed simply connect a PoE network devices to this 4-port PoE+ injector.
  • 4-PORT POE TRENDnet’s 65W 4-Port Gigabit PoE+ Injector supplies up to 30W of power to four PoE (IEEE 802 3af) or PoE+ (IEEE 802 3at) devices at industry PoE standards for greater device interoperability.
  • POE DISTANCE The multi-port gigabit PoE+ injector provides four PoE network connections up to 100m (328 ft ) away from the 4-port PoE injector.
  • FANLESS DISTANCE The fanless design of the gigabit PoE+ Injector eliminates operating noise and lowers energy consumption.
Check Stock