Top Industrial Heat Shrink

XHF 1 Inch (25mm) 3:1 Waterproof Heat Shrink Tubing Marine Grade Wire Cable Adhesive Lined Tube Insulation Seal Against Moisture Corrosion and Air Leakage, 4 Ft Black

  • [Better protection]: double wall heat shrink tube and lined with glue can better act on the wrapped objects..
  • [A wide range of applications] Shrink tube are mainly used for industrial, ship, wire links, anti-rust and anti-corrosion protection of solder joints, and audio and electrical DIY. Wire ends, harnesses, electronics protection and insulation treatment, fitness equipment parts and steel structure surface protection and so on..
  • [The rubber liner has good sealing performance] XHF heat-shrinkable tube has the advantages of good electrical insulation, good sealing, corrosion resistance and high temperature resistance. Anti-aging, tough, not easy to break..
  • [Easy and fast] You only need to heat it evenly with a hot air blower or a candle to make it shrink. It is a 3:1 heat shrink ratio and will shrink to the original 1/3..
  • [Diversity] We have three kinds of shrinkage (2:1, 3:1, 4:1) heat shrink tubes for you to choose from..
Check Stock

Wirefy 90 PCS Heat Shrink Fork Connectors #8 - Marine Grade Fork Terminals - Spade Fork Wire Connectors - Yellow 12-10 Gauge

  • FORK CONNECTORS WITH HEAT SHRINK TECHNOLOGY - Increased tensile strength. Resistant to salt water, oil, and grease..
  • INDUSTRIAL GRADE HEAT SHRINK TUBING - Shrinks to 1/3 of its original size. Has heat activated adhesive that bonds the connector to the wire..
  • INCREASED CONDUCTIVITY - Pure copper terminals ensure highest current flow. Tin top-layer coating protects the terminal against corrosion..
  • VALUE PACK - This kit includes 90 PCS Yellow 12-10 AWG heat shrink fork connectors #8 that will last through numerous projects..
  • LIFETIME WARRANTY - All Wirefy electrical connectors are backed by our best-in-class lifetime warranty..
Check Stock

DIY Battery Pack PVC Heat Shrink Wrap Tube Length 3M Width 250±5MM for Big Battery Pack Power

  • 1.PVC Materia Heat Shrink, Thicknessl is 0.15MM ..
  • 3.Warm Reminder :Battery Heat shrink Tubing Width is 250±5MM .So Pls calculate ur battery pack or mechine size exactly,IF not ,it will too big or small .coz I hope i dont waste ur time and hope u have a Happy Shopping.
  • 4.PVC Heat Shrink Tubing is a thin-wall, low cost material offering good electrical and mechanical characteristics. When exposed to heat in excess of 98 degree for a few seconds, the specially formulated polyvinyl chloride material will shrink rapidly and uniformly conforming to the shape of the object to be covered..
  • 5.Applications include insulation and jacketing of batteries, capacitors and similar objects-a vast range of applications in the production of industrial equipment, toys, sporting goods, electronics, and consumer products..
Check Stock

XHF 5/8 Inch 15mm 3 1 Waterproof Heat Shrink Tubing Marine Grade Wire Cable Adhesive Lined Tube Insulation Seal Against Moisture Corrosion and Air Leakage 4 Ft Black

  • [Safety and environmental protection] XHF dual wall shrink tube are UL and CSA certified, RoHS compliant, free of formaldehyde (HCHO), heavy metals....
  • [A wide range of applications] Shrink tube are mainly used for industrial, ship, wire links, anti-rust and anti-corrosion protection of solder joints,....
  • [The rubber liner has good sealing performance] XHF heat-shrinkable tube has the advantages of good electrical insulation, good sealing, corrosion....
  • [Easy and fast] You only need to heat it evenly with a hot air blower or a candle to make it shrink. It is a 3:1 heat shrink ratio and will shrink to....
  • [Note]: Please ignore the product description size on the picture label of the product packaging. This size is not related to the product inside the....
Check Stock

20 Ft 1/4\ (Diameter) Dual Wall Black Heat Shrink Tubing 3:1, Each 1 Ft long, 20 PCS No Wrinkle Electrical Shrink Tube for Wires,Marine Grade Shrink Tube with Adhesive Lined Waterproof

  • No Creases：Up to 1 Ft industrial heat shrink tube, no zigzag packaging and distribution, no creases, and does not increase your work difficulty.It is easy for wires in electrical work.
  • No Printing：There is no text printed on the outer wall of the tube. It's your best choice to be tidy..
  • No pollution：United States UL certified, RoHS compliant. If you work with a heat shrink tube for a long time, it's your health guarantee..
  • Nothing is Impossible:This is a marine grade industrial heat shrink tube, which can help you to complete tasks well no matter you are in a professional project or a weekend project..
  • No Worries:Hey, guys, just buy it. If you are not satisfied with the product or even the packaging, you can contact us by email. We will give you an answer and solve the problem within 12 hours. We won't give you a chance to say,"No, that's the white elephant.".
Check Stock

Master Appliance EC-MINI Heat Gun for Crafts, Shrink Wrap, Heat Shrink Tubing, Wire Connectors, Electrical Connectors, Epoxy Resin, Candle Making Heatgun, Embossing Hot Air Gun w/Heat Shrink Reflector

  • USA FAMILY-OWNED COMPANY: Located in Racine, Wisconsin, Master Appliance has been family-owned industrial heat gun manufacturing company for over 60 years. Simply put, heat guns are our specialty. You can find our wide variety of our professionally engineered heat guns trusted and in-use in some of the most well-known manufacturing companies worldwide..
  • HEAT GUN FOR WIRE CONNECTORS, CRAFTS AND MORE: The small compact size and shape of this EC-MINI heat gun makes it a perfect heat gun tool for crafts, embossing, heat shrinking electrical connectors / wire connectors, heat shrink tubing, candle making, decal removal, vinyl wrap, epoxy resin and more....
  • PROFESSIONALLY MADE: 350 watts of power helps this heat gun reach a max temperature of 640F quickly, while a 9.9 CFM airflow helps you get work done efficiently.
  • LIGHTWEIGHT, PORTABLE & VERSATILE HEAT GUN: Easy to hold like a pen, this mini heat gun also has a built-in wire stand for hands-free use great for heat shrink tubing projects and convenient, safe cooling of the tool.
  • PROFESSIONALLY ENGINEERED: Made with impact-resistant plastic housing, this mini heat gun comes with a heat shrink tube reflector for use with all your electrical wire connector and shrink tubing projects and 6.5 foot power cord.
Check Stock

Master Appliance EC-200 Variable Temperature Heat Gun, Hot Air Gun, 120V, 10 Amps, 1200W, for shrink wrap, wire connectors, shrink tubing, crafts, stripping paint

  • USA FAMILY-OWNED COMPANY: Master Appliance has been manufacturing high quality industrial heat tools since 1958. Located in Racine, WI, with over 60 years of experience in the heat tool industry, you can find Master's industrial heat guns trusted and put to use in some of the most well-known manufacturing companies worldwide. The EC-200 is a great entry level heat gun for users that desire a variable temperature heat for those do-it-yourself projects from a known and trusted USA brand..
  • VARIABLE TEMPERATURE HEAT GUN & 2 FAN SPEEDS: The EC-200 heat gun can be adjusted from 100F to 930F and has two fan speeds 5 & 9 CFM. The adjustability makes it versatile for a wide range of projects. A great heat gun for shrink tubing, electrical wire connectors, packaging, epoxy resin, stripping paint, crafts, candle making and more.
  • ETL LISTED & BUILT IN HAND GUARD: This heat gun has been tested and approved by ETL safety testing agency. Hand guard protects hands and fingers. A recessed switch guards against knocks and bumps..
  • LIGHTWEIGHT AND BUILT IN STAND: The EC-200 heat gun weighs only 1lb and has a built-in wire stand on its handle. Rest the heat gun on its back when not in use or for hands free use when connecting wire connectors or heat shrink tubing..
Check Stock

DIY Battery Pack PVC Heat Shrink Wrap Tube,Length 3M Flat Width 150±1MM for Big Battery Pack Power

  • 1.Heat Shrinkable Tubing Thicknessl is 0.15MM,Length is 3M..
  • 3.Warm Reminder :Battery Heat shrink Tubing Width is 150±1MM .So Pls calculate ur battery pack or mechine size exactly,IF not ,it will too big or small .coz I hope i dont waste ur time and hope u have a Happy Shopping..
  • 4.PVC Heat Shrink Tubing is a thin-wall, low cost material offering good electrical and mechanical characteristics. When exposed to heat in excess of102 degree for a few seconds, the specially formulated polyvinyl chloride material will shrink rapidly andȀ㯸Ȁ㯸 ⾯Ȁ䃸Ȁ䃸 クȀ磸Ȁ磸 ㆯȀ铸Ȁ铸 ㊯Ȁ꛸Ȁ꛸ ㎯Ȁ췸Ȁ췸 㒯Ȁ铹Ȁ铹 㖯Ȁ당Ȁ당 㚯Ȁ볹Ȁ볹 㞯Ȁ퓹Ȁ퓹 㢯 㢯.
  • 5.Shrinkable Plastic Tube Sleeve ,Applications include insulation and jacketing of batteries, capacitors and similar objects-a vast range of applications in the production of industrial equipment, toys, sporting goods, electronics, and consumer products..
Check Stock

Othmro 1Pcs 32.8Ft Battery Heat Shrink Tubing Kit, 1.16inch Flattening Width Insulation PVC Heat Shrink Tube, Shrink Wrap Tubing Industrial Tubing for 18650 Single Section Power Supply Gray

  • 【Product Details】-PVC Materia Heat Shrink, Shrinkable Temperature:80℃.
  • Shrinkage rate:≥48±8%, Length:10m/32.8Ft.
  • material: PVC, Product Type: Insulated pipe PVC pipe，Rated voltage: 300V, Temperature range: -40℃-105℃.
  • 【Advantage】-PVC Heat Shrink Tubing is a thin-wall, low cost material offering good electrical and mechanical characteristics, excellent environmental protection, insulation, stable performance and fast shrinkage.When exposed to heat in excess of 80 degree for a few seconds, the specially formulated polyvinyl chloride material will shrink rapidly and uniformly conforming to the shape of the object to be covered..
  • 【Warm Reminder】-Battery heat shrink tubing flattening width is29.5mm.So Pls calculate ur battery pack or mechine size exactly, IF not ,it will too big or small .coz we hope dont waste ur time and hope u have a happy shopping ..
  • 【Wide Application】-Applications include insulation and jacketing of batteries, capacitors and similar objects-a vast range of applications in the production of industrial equipment, toys, sporting goods, electronics, and consumer products..
  • 【Note】-Please place this product in a cool place to avoid deformation due to high temperature..
Check Stock

San Jamar SWX100 SAF-T-WRAP Stackers

  • Professionally shrink wrap packages for just pennies.
  • Simple three step operation and no warm up required.
  • Enhance the appearance and value of your product, by protecting it against pilfering, dirt, dust, moisture and handling.
  • System includes: Bar Sealer, Timer, two speed Heat Gun and Holder, Film Rack, free 500ft. roll of centerfold 75 gauge shrink film, outlet plug and parts kit.
Check Stock

Master Appliance HG-501T Lightweight Industrial Heat Gun, Quick Change Plug-In Heating Element - 1200F, 120V, 1680W, 14 Amps - Assembled In USA

  • Same industrial quality, 24% lighter: The heavy-duty T-Series heat guns are made with new impact-resistant plastic housing that’s 24% lighter than our die-cast aluminum D-Series housings.
  • it’s easy to hold and perfect for long hours on the job.
  • Heat, power and speed: 1680 watts of power reaches a max temperature of 1200F quickly, while a high 27 CFM airflow at 3400 FPM helps you get tough jobs done faster.
  • the maintenance-free upgraded motor is designed to deliver extra run life.
  • Functional design: An ergonomic soft grip handle improves comfort and usability while a lightweight, anti-slip plastic stand offers stable 90-degree adjustability.
  • use to bend plastics, cure adhesives, dry parts, heat parts, shrink tubing, shrink packaging, strip paint and more.
  • Total heat efficiency: New quick-change plug-in heating element produces balanced airflow over element for maximum heating efficiency.
  • fixed air intake provides temperature consistency, improving process control.
Check Stock

Master Appliance Proheat PH-1100A Professional Electric Heat Gun - Adjustable Temperature Heat Gun, Compact & Lightweight Variable Temperature Heat Gun, Industrial Crafting Tools & Equipment

  • USA FAMILY-OWNED COMPANY: Master Appliance has manufacturing high quality industrial heat guns since 1958. Located in Racine, WI with over 60 years of experience in the heat tool industry, you can find Master’s heat guns like this PH-1100A 3 temperature electric heat gun, trusted and in the hands of professionals in some of the most well-known manufacturing facilities worldwide..
  • PROFESSIONAL HEAT GUN, PROHEAT A-SERIES: The PH-1100A is a professional electric powered heat gun that features 3 adjustable temperature settings: Low (9 CFM and no heat), Medium (9 CFM and 600 °F), and High settings 18 CFM and 1200°F. A new trigger switch control system that makes it easy to quickly turn the heat gun on and off all day long or lock the heat gun in the on position for hands-free use..
  • EASY TO REPAIR: The difference between a low-end heat gun and a true professional heat gun is professional heat guns are designed to be repairable after a lot of heavy use. The Master Proheat’s all have easy to replace: heating elements, cordsets, nozzle covers and Master Appliance offers a full selection of other repair parts and accessories so you can use your heat gun endlessly for years to come..
  • VERSATILE INDUSTRIAL HEAT GUN: A multipurpose tool that can be used for a w....
Check Stock