Top Industrial Heating Element

TPI - H2903024SW Electric Baseboard – Stainless Steel Convection Heater, Corrosion Resistant. Premium Heating Equipment

  • Electric Baseboard: stainless steel heating equipment features aluminum fins. Over temperature thermal limit. The junction boxes contain quick connect cable clamps. Comes with 6 IN ground lead wires. Made in U.S.A.
  • Practical Heating Instrument: ideal for winter season and cold places. Offers better heat retention and more consistent room temperature. Even distribution of warmth from floor to ceiling. Premium heating accessory with extra durability. Convection heater.
  • Easy to Install: heating device with DIY installation flexibility. Designed to reduce effects of indoor allergens. Features low surface temperature and auto safety shut off. Corrosion resistant and scratch proof heating element. Ideal electric baseboard.
  • High Quality Heating Accessory: ideal for low traffic spaces like laundry rooms, workshops, garages. Industrial heating device can be used as air circulator, drier or heater. Reliable heating solution.
  • Care Tip: wipe with plain or microfiber cloth each day. Remove lose dust with feather duster. Low maintenance electric board. Do not use harsh chemical based cleaners.
Check Stock

W11344457 Dryer Heating Element 3387747 - Suitable for Whirlpool Kenmore elite he4/90 series heating element Exact fit medc700vw0, 110.82822101, gew9200lw1, gew9250pl0,etc.

  • ✅【3387747 HEATING ELEMENT】-- 3387747 Dryer Heating Element Assembly is used in dryers, effectively generates heat in an electric clothes dryer to dry clothes. The package includes 1 x W11045584 heating element, includes the housing with the heating element coil and insulators attached. The size is about width 5.7 inch × length 13.8 inch. The WP3387747 dryer heating element power is 5400 watts and the voltage is 240 volts. This heating element has 5/16" terminal ends..
  • ✅【HIGH NICKEL CHROMIUM CONTENT】-- The whirlpool 3387747 dryer element is made of high quality metal and contains heating wire coils which have the nickel-chromium content reaches 85% for generating heat effectively in electric dryer. The insulators are made of high-tem-perature ceramic. They are firmlymounted into the frame to hold theheating coil, which will not come looseunder the vibration of a running machine. To confirm that the heating element is faulty, unplug the dryer when the symptom occurs in time..
  • ✅【SUITABLE FOR MOST DRYER MODELS】-- This 3387747 Dryer Heating Element Assembly fits for Ama-na, Ken-more, Kitchen-Aid, May-tag, Whirl-pool dryer. ◆3387747 Replaces....
Check Stock

TPI OCH2-55-208V, Fostoria, OCH2 Quartz Tube Electric Indoor\\/Outdoor Infrared Heater, lg. Steel, 208 Volts, 4000-Watts, Brown, 55 x 7.5 x 7 inches

  • ...ocess heating. BTU rating: 13,652. Provides warmth and comfort using high efficient infrared medium-wave quartz emitter generating clean and safe heat output with no fan or moving parts..
  • Where Used: Long lasting construction with corrosion resistant parts. Ideal for damp or harsh environmental conditions for Industrial, Commercial, & Residential (non-dwelling areas). ETL Listed for USA/Canada for suspended indoor or totally enclosed outdoor spot heating applications to solve hard to heat areas such as workstations, shops, garages, patios, bus shelters, loading docks, restaurants, product heating and freeze protection..
  • Install & Care Instruction: To achieve optimum infrared heating results to heat people or objects, mount each heater 8’ apart at 8’ to 12’ high and tilt housing 15-20 degrees towards the target. Prior to each use, wipe the element device with damp cloth to remove dust..
Check Stock

TPI Corporation, OCH-46-120V-CE, Fostoria OCH Quartz Tube Electric Indoor/Outdoor Infrared Heater, 48in lg., Steel, 120 Volts, 1500-Watts, Includes Cord and Plug, Powder Coated Brown

  • Infrared Overhead Heat: Easy to assemble, operate and maintain. Lightweight heating device for quick and quiet performance that effectively delivers all three fundamentals of heat transfer convection, conduction, radiation..
  • Durable Electric Heater: Impressive service life with 5000-hour life expectancy. Includes mounting brackets that allow unit to tilt up to 45-degrees. Steel housing has textured high-temp brown finish. Frosted Quartz Tube Heating Element. MADE IN USA..
  • High Performance: Generates radiant floor to ceiling heat for people or process heating. Provides warmth and comfort using an efficient infrared medium-wave quartz emitter that generates clean, safe heat with no fan or moving parts. BTU rating: 5,120..
  • Applications: Ideal for damp or harsh Industrial, Commercial, & Residential (non-dwelling area) conditions. ETL Listed for suspended indoor or totally enclosed outdoor spot heating. Great for shops, garages, loading docks, patios, restaurants and more..
  • Installation & Care: For optimum infrared heating results to heat people or objects, mount each heater 6 apart at 7 to 10 high and tilt housing 15-20 degrees towards the target. Prior to each use, wipe element device with damp cloth to remove dust..
Check Stock

Master Appliance VT-751D Industrial Heat Gun, Quick Change Plug-In Heating Element, Variable Temperature Heat Gun, 130F to 1200F, 120V, 1740W, 14.5 Amps, Assembled In USA - USA Company

  • USA FAMILY-OWNED COMPANY: Master Appliance has manufacturing high quality industrial tools since 1958. Located in Racine, WI with over 60 years of experience in the heat tool industry, you can find Master’s heat guns like this VT-751D variable temperature electric heat gun, trusted and in the hands of professionals in some of the most well known manufacturing facilities worldwide..
  • INDUSTRIAL QUALITY HEAT GUN: This heavy-duty heat gun is made with die-cast aluminum housing and an upgraded long-life universal motor that delivers exceptional run life. These Master Heat Guns are designed and engineered in the USA and are tested to continue their top-notch performance in the most demanding work environments. Trusted by some of the most well-known manufacturing companies worldwide..
  • VARIABLE TEMPERATURE HOT AIR: A newly designed variable temperature dial offers lockable temperature capability from 130F to 1200F. A versatile heat gun great for a wide variety of tasks including wire connectors, heat shrink tubing, paint stripping, decal removal, epoxy resin, packaging, automotive repair, wiring projects, leather seat repair, and more..
  • DESIGNED BY THE EXPERTS: A new ergonomic soft grip handle and 90-degree adjustable stand maximize user comfort for long days....
Check Stock

3387747 PS11741416 Dryer Heating Element by Blutoget - Fit for Whirlpool Amana Ken-more Kitchen-Aid Dryer - Replaces WP3387747 W11344457 W11045584 AP6008281 AP2947033 PS344597 MEDC700VW0 GEW9200lW1

  • ✅【3387747 DRYER HEATING ELEMENT】:WP3387747 Dryer Heating Element Assembly can be used in the dryer to help generate heat to dry clothes. The whirlpool dryer heating element W11344457 is made of high quality METAL and contains heating wire coils which have the Nickel-chromium content reaches 85% for generating heat effectively in electric dryer. More heat and abrasion resistant to maintain a long and effective use time.Insulators are made of high-temperature ceramic. They are firmly mounted into the frame to hold the heating coil, which will not come loose under the vibration of a running machine. W11045584 AP6008281 heating element is rated at 5400 Watts/240 Volts and has 2 5/16" terminals..
  • ✅【GREAT VALUE PACK】 : Includes 1 x whirlpool dryer heating element W11045584 5400w 240v. WP3387747 Dryer Heating Element product upgrade has better heat resistance and wear resistance,the content of nickel and chromium is higher, which can reach more than 85%. Whirlpool duet dryer heating element WP3387747 fixes the following symptoms:dryer too hot, no heat, not enough heat, takes too long to dry, unusual noises, loud noises. W11344457 dryer heating element replaces your old and broken dryer parts to hel....
Check Stock

279838 Dryer Heating Element Assembly by Beaquicy - Replacement for Whirlpool Ken-more Dryer - 4531017 Dryer Heating Element

  • ✅【279838 DRYER HEATING ELEMENT】-- Includes 1 x 279838 dryer heating element assembly.The coil on the heating element accepts and resists the controlled current, thus heating the wire.The heat generated is used to dry the clothes in the dryer.279838 Dryer heating element assembly contains 85% chromium and the length of the heating wire is 25% longer than other replacement parts of the ordinary dryer.It is rated at 5,400 watts and 240 volts and has a 2-5/16 "male terminal..
  • ✅【HIGH QUALITY NICKEL CHROMIUM ALLOY】-- 279838 Dryer heating element assembly includes the housing with the heating element coil and insulators attached. The heating coil is made of an alloy of nickel and chromium.It has a high resistance that prevents itself from breaking and burning out. The insulators are made of high-tem-perature ceramic. They are firmlymounted into the frame to hold theheating coil, which will not come looseunder the vibration of a running machine..
  • ✅【90 DAYS WARRANTY】-- Product whirl-pool 279838 dryer heating element assembly support 90 days return and exchange. Our company attaches great importance to the shopping experience of every customer. No ....
Check Stock

279838 3403585 & 3977767 & 3392519 Clothes Dryer Heating Element Kit for Whirlpool, Kenmore, Roper, Maytag, Estate, Inglis, KitchenAid, Crosley, Amana, Admiral, Magic Chef Dryer

  • 【Design】 High quality dryer heating element kit, the heating element is a metal chamber containing a heating wire coil (Nickel-chromium alloy) for generating heat in the electric dryer, including 2-5/16″ male terminals.
  • 【Fitment】 The Clothes Dryer Heating Element Kit fits Kenmore Model: 11060222510, 11062332510, 11065212610, 11065232610, 11066134610.
  • and Others Name Brand: Whirlpool, Roper, Maytag, Estate, Inglis, KitchenAid, Crosley, Amana, Admiral, Magic Chef.
  • 【Composition】 The heating element includes a heating coil, a thermostat and a temperature fuse. Heating coil heating air, blowing into rotary drum to dry. The thermostat regulates the temperature to a safe range. Temperature fuse cut off current to avoid sudden safety hazard caused by overheating.
  • 【Package Includes】 1 * 279838 heating element, 1 * 3977767 cycling thermostat, 1 * 3392519 dryer thermal fuse.
  • 【Replacement Part Number】 heating element replacement for numbers: 279837, 279838, 279838A, 279838VP, 3398064, 3403585, 8565582, AP3094254, W10724237.
  • dryer cycling thermostat replaces part numbers: 3977767, 3399693, WP3977767VP, AP3131941, 898078.
  • dryer thermal fuse replaces part number 3388651, 3392519, 694511, 80005, WP3392519VP.
Check Stock

279838 3403585 & 279816 & 3392519 Clothes Dryer Heating Element Kit for Whirlpool, Kenmore, Roper, Maytag, Estate, Inglis, KitchenAid, Crosley, Amana, Admiral, Magic Chef Dryer

  • 【Design】 High quality dryer heating element kit, the heating element is a metal chamber containing a heating wire coil (Nickel-chromium alloy) for generating heat in the electric dryer, including 2-5/16″ male terminals.
  • 【Fitment】 The Clothes Dryer Heating Element Kit fits Kenmore Model: 11060222510, 11062332510, 11065212610, 11065232610, 11066134610.
  • and Others Name Brand: Whirlpool, Roper, Maytag, Estate, Inglis, KitchenAid, Crosley, Amana, Admiral, Magic Chef.
  • 【Composition】 The heating element includes a heating coil, a thermostat and a temperature fuse. Heating coil heating air, blowing into rotary drum to dry. The thermostat regulates the temperature to a safe range. Temperature fuse cut off current to avoid sudden safety hazard caused by overheating.
  • 【Package Includes】 1 * 279838 heating element, 1 * 279816 Dryer Thermostat kit, 1 * 3392519 dryer thermal fuse.
  • 【Replacement Part Numbers】279838 heating element replace part numbers: 279837, 279838, 279838A, 279838VP, 3398064, 3403585, 8565582, AP3094254, W10724237.
  • 279816 thermal cutoff kit replaces part numbers: 279816VP, 3399848, 3977393, AP3094244 3392519 dryer thermal fuse replaces part number: 3388651, 3392519, 694511, 80005, WP3392519VP..
Check Stock

8544771 Dryer Heating Element 279973 Cycling Thermostat&Thermal Fuse Switch Kit for Whirlpool, Kenmore, Roper, Maytag, Estate, Inglis, KitchenAid, Crosley, Amana, Admiral, Magic Chef

  • 【Design】 High quality 8544771 Dryer Heating Element 279973 Thermostat&Thermal Fuse Switch Kit, the heating element is a metal chamber containing a heating wire coil (Nickel-chromium alloy) for generating heat in the electric dryer, including 2-5/16″ male terminals.
  • 【Fitment】 The Clothes Dryer Heating Element Kit fit Whirlpool, Kenmore, Roper, Maytag, Estate, Inglis, KitchenAid, Crosley, Amana, Admiral, Magic Chef.
  • 【Composition】 The heating element includes a heating coil, a cycling thermostat and a thermal fuse switch. Heating coil heating air, blowing into rotary drum to dry. The thermostat regulates the temperature to a safe range. Thermal fuse switch cut off current to avoid sudden safety hazard caused by overheating.
  • 【Package Includes】 1 * 8544771 Dryer Heating Element, 1 * 279973 Cycling Thermostat&Thermal Fuse Switch Kit.
  • 【Replacement Part Numbers】 279973 Thermostat&Thermal Fuse Switch replacement part numbers: 279973VP, 3391913, 3404151, 3404152, 3977395, 8318314, 897710, AP3094323.
  • 8544771 Dryer Heating Element replacement number: 8544771, 8544771R, AP6013115, AP3866035, PS11746337 PS990361, W10836011, WP8544771VP..
Check Stock

Master Appliance HG-501D-00-K Industrial Heat Gun Kit, Quick Change Plug-In Heating Element, 1200F, 120V, 1740W, 14.5 Amps, Assembled In USA

  • Industrial quality: This heavy duty heat gun is made with a die-cast aluminum housing and an upgraded, long-life universal motor that delivers twice the run life.
  • Heat, power and speed: 1740 watts of power reaches a max temperature of 1200F quickly, while a high 27 CFM airflow at 3400 FPM helps you get tough jobs done faster.
  • Functional design: An ergonomic soft grip and 90-degree adjustable stand maximize comfort and usability.
  • heat gun kit includes shrink attachment, spreader attachment, reducer attachment and a rugged plastic storage case.
  • Total heating efficiency: New quick-change plug-in heating element with even airflow over element.
Check Stock

Stanbroil Replacement Part Electric Smoker and Grill Heating Element with Adjustable Thermostat Cord Controller

  • Made from premium materials, this heating element was designed to last..
  • 1500W, 110V Heating Element with adjustable mounting bracket and element support feet..
  • The heating element and matching adjustable controller allows you to adjust the temperature from approximately 50 F up to 450 F..
  • The heating element can easy mount flange which requires a rectangular opening in the side of your grill or smoker..
  • Built in Controller Heating On indicator light..
Check Stock