Top Industrial Laminates

QWORK Grounding Mat, 20'' x 27.5'', ESD High Temperature Mat Kit, Anti Static Mat

  • Complete ESD Anti-static Kit: (1) 20'' x 27.5'' ESD mat with two built-in grounding snaps, (1) 6 FT attachable grounding cord with removable alligator clip..
  • ESD Safe: The ESD mat is .080” (2mm) thick, dual sided, and made of a static dissipative, industrial grade elastomer. Anti-static mat is resistant to acid, alkali, chemical soldering flux, wear-resisting and easy to clean..
  • Soft: The material is as durable as rigid laminates, and as comfortable and appealing as softer rubber or vinyl mats. Conveniently folded into the bag. 0.080-inches (2mm) thickness allows mat to remain flat and prevents curled edges. 0.05 second decay time ensures rapid, safe static drain..
  • Healthy: Durable surface withstands high temperatures, solder, flux, and harsh chemicals. Low out gassing and VOC are ideal for clean-rooms and other controlled environments. No vinyl monomers or DOP ensures conformity to personal and environmental safety standards..
  • 100% Satisfied Service: each one defective item can have the free replace or refund, need more help please feel free to contact us, we will try our best to assist you..
Check Stock

BOSCH U503 3-Piece Assortment U-shank Jig Saw Blade Set for Laminate Flooring

  • Includes two U1BIF special for laminates, and one U1AOF special for scrolling in laminates.
  • Precisely ground teeth for clean, fast cuts in laminate flooring and other abrasive materials.
  • U-shank design fits some professional and most consumer jig saw brands.
Check Stock

CMT P10080 5/8\ Bore ITK Melamine & Ultra Finish Saw Blade, 10\ x 80 Teeth

  • For crosscuts, fine finish on two-sided laminates without using scoring blades.
  • Use on radial arm, miter and table saws for cutting wood, moldings, melamine, laminates, chipboard.
  • 0.094 kerf thickness, 0.063 plate thickness, 10Degree hook angle.
  • Thin kerf reduces material waste, shear angle produces smooth cuts and improves cutting speed.
  • Special Carbide prevents from material failure, Non-Stick Orange Shield protects against corrosion.
Check Stock

Yakamoz 1/2\ Shank Panel Top & Bottom Bearing Flush Trim Pattern Router Bit Woodworking Cutter

  • Shank Diameter: 1/2 Inch, Cutting Diameter: 3/4 Inch, Blade height: 2-1/2 Inch.
  • Perfect for templates placed above or below the work piece, or to trim laminates or veneer perfectly flush with countertops, shelving and other projects..
  • Carbide Tipped - Micro grain grade provides increased strength and utmost resistance.
  • Use on hand-held routers, laminate trimmers, and table-mounted portable routers..
  • Great performance on all hardwoods, softwoods, plastic laminates and veneered plywood..
Check Stock

Beaded Ball #6 Chain - Stainless Steel 100 Feet Spool for Plumbing and Industrial Equipment Labeling, Commercial Retaining Applications and Vertical Blinds

  • MADE IN THE USA with the highest-quality stainless steel, WAXAW #6 Ball Chain boasts superior flexibility for all of your tagging, crafting and retaining applications. Couplings are sold separately..
  • LARGE, INDUSTRIAL-SIZE #6 beads have a 1/8” diameter (3.2 mm) and average 69 beads per foot. With an average tensile strength of 45 lbs, this ball chain is ideal for labeling pipe fitting, hanging tools and attaching swatch samples to displays..
  • GLEAMING LUSTROUS FINISH allows you to use WAXAW #6 Ball Chain to make eye-catching jewelry or add unique pull chains to ceiling and light fixtures..
  • CORROSION-RESISTANT and hard-wearing stainless steel is ideal for moisture-rich marine environments as well as the humid, steamy confines of plumbing chases. This makes them suitable for both indoor and outdoor use..
  • HANG ONTO SWATCHES of carpet samples, laminates and paint chips, or ensure that steam fittings and tools are fitted with secure labels when you use WAXAW Ball Chain #6. Our 100-foot spool lets you tailor chain lengths to individual projects..
Check Stock

Plews / Edelmann Amflo 24-25E-RET Polyurethane Recoil Air Hose - Lightweight, Non-Marring, Extreme Cold Flexible, Self-Storing, Ideal for Home, Shop, or Industry, 1/4\ X 25' Blue

  • SELF-STORING RECOIL HOSE: Retains its self-coiling properties.
  • No wasting time coiling hose for storage.
  • NO MARKS, NO MESS: Smooth, non-marring finish.
  • Ideal for indoor finishing work, won’t cause damage to painted surfaces, wood flooring, trim, and laminates.
  • COLD WEATHER FLEXIBILITY: Polyurethane hose is perfect for year round use in temperatures as low as -30 degrees F.
  • BUILT TOUGH: Oil and chemical resistance.
  • Reinforced braided nylon make this hose a great choice for harsh environments like automotive repair shops and industrial facilities.
  • WON’T TWIST OR CRIMP: 1/4 inch NPT swivel fittings to reduce twisting, rugged PVC bend restrictors prevent damage to hose ends, 120 PSI working/480 PSI burst pressure, -30 to +150 temperature range.
Check Stock

BOSCH T101AO 5-Piece 3-1/4 In. 20 TPI Clean for Wood T-Shank Jig Saw Blades,Silver

  • Pointed teeth reduce splintering on both sides of the workpiece.
  • For use on double-sided laminates, laminated substrates, mdf, hard and soft woods, and plywood.
  • 20 TPI pointed tooth profile and narrow blade body optimized for clean, curved cuts and scrolling.
  • T-shank design eliminates the set-screw mounting hole for longer life and better durability.
Check Stock

Hairpin Leg 16 inch, 4 Hairpin Coffee Table Legs with 3 Solid Rods, Nightstand Hair Pin Table Legs DIY Metal Legs for Coffee Table, Chair, TV Stand

  • UPGRADED DESIGN AND MORE STURDY: 3 solid rods hairpin leg design, more stable and stronger than 2 rods or hollow rods table legs. Heavy duty hair pin legs support up to 600 lbs..
  • NO MORE SCRATCHES AND NOISE: The metal hairpin leg with 4 rubber gaskets, ideal solution to protect floors. No more noise and screeches when moving furniture! These table leg rubber gaskets will prevent your hardwood floors, tiles and laminates from damages..
  • HIGH MATERIAL MADE: These hairpin legs are made of solid cold rolled sturdy steel with a satin black powder-coated finish, no rust and no worry to cause scratches pin legs..
  • VERSATILITY DIY FURNITURES DESIGN: Our 16 inch long hairpin table legs are suited for make coffee table legs, night stand legs, desks leg, TV Stand leg, bench legs even cining table legs, DIY in your mind..
  • EASY INSTALL: The side table legs come with the screws, quick assembly with the holes in mounting bracket. 3 solid rods hairpin legs help you to create industrial modern furniture designs and make it unique..
Check Stock

TruLam Office Laminator, Thermal & Cold Pouch, 12.5\ Max Width, 3 Mil-10 Mil, TL-320E

  • Laminates documents up 12.5 inches in width. Takes both hot and cold laminating pouches from 3 Mil-10 Mil. Quick warm-up time and laminates up to 23.6 inches per minute..
  • Back-lit LCD display screen, temperature selection buttons, and a built-in reverse button to easily remove jams, and a dual-fan cooling system to reduce curling and produce a superior finish..
  • Helpful temperature guide labeled on the machine with recommended temperatures based on the thickness of your pouch. Use the Temperature Control arrows for the laminator to reach your desired temperature..
  • Heavy-duty metal housing with full one-year warranty. Fits on virtually any desktop..
  • Ships in certified protective packaging..
Check Stock

OLFA 9mm Precision Utility Knife (XA-1) - Multi-Purpose Retractable Precision Knife w/ Fiberglass Reinforced Handle & Snap-Off Blade

  • RAZOR SHARP 25mm BLADE - Our knife is preloaded with an HB Extra Heavy Duty Stainless Steel Snap-Off Blade made from Japanese tool grade steel for unparalleled sharpness and superior edge retention. The 25mm blade has 7 razor-sharp snap-off segments. The extra heavy-duty blade is great for industrial or construction applications..
  • NON SLIP CORROSION RESISTANT HANDLE - This precision knife has a compact handle that is precise and strong enough for detailed cuts through thick materials. Its durable body resists corrosion and has a non-slip grip and comfortable fit in your hand..
  • CUSTOM RATCHET LOCK CONTROL - Designed with safety in mind, our box cutter's ratchet-based locking system provides custom cutting depths. The blade slider has a wheel locking mechanism for unlimited positions when securing the blade in place..
  • MULTIPURPOSE EXTRA HEAVY DUTY DESIGN - The OLFA 25mm NH-1 Retractable Utility Knife is perfect for cutting through the toughest materials. It delivers precision cuts through nylon, rope, laminates, leather, rubber, gasket materials, and more..
  • THE OLFA STANDARD - As the original inventor of the Snap-Off Knife, OLFA has maintained a standard of cutting excellence for our quality and durability. Pairing your OLFA 25mm Utility Knife with OLFA 25....
Check Stock

High Temperature Soldering Mat, 118'' x 28'' Anti-Static Table Mat, Heavy Duty Non-Slip Rubber Workstation Mats Grounding Desk Pad for Soldering Iron, Sensitive Electronics Working

  • Complete ESD Anti-static Kit: (1) 20'' x 27.5'' ESD mat with two built-in grounding snaps, (1) 6 FT attachable grounding cord with removable alligator clip..
  • ESD Safe: The ESD mat is .080” (2mm) thick, dual sided, and made of a static dissipative, industrial grade elastomer. Anti-static mat is resistant to acid, alkali, chemical soldering flux, wear-resisting and easy to clean..
  • Soft: The material is as durable as rigid laminates, and as comfortable and appealing as softer rubber or vinyl mats. Conveniently folded into the bag. 0.080-inches (2mm) thickness allows mat to remain flat and prevents curled edges. 0.05 second decay time ensures rapid, safe static drain..
  • Healthy: Durable surface withstands high temperatures, solder, flux, and harsh chemicals. Low out gassing and VOC are ideal for clean-rooms and other controlled environments. No vinyl monomers or DOP ensures conformity to personal and environmental safety standards..
  • 100% Satisfied Service: each one defective item can have the free replace or refund, need more help please feel free to contact us, we will try our best to assist you..
Check Stock

ZokMok Plus 1/4 Shank Pattern Flush Trim Router Bits Set 4pcs Carbide Bottom Bearing Flush Trim Router Bits Handy Durable & Sharp Prevent Tear-Out Perfectly Suitable for Light Work Green

  • Shank Diameter: 1/2 Inch, Cutting Diameter: 3/4 Inch, Blade height: 2-1/2 Inch.
  • Perfect for templates placed above or below the work piece, or to trim laminates or veneer perfectly flush with countertops, shelving and other....
  • Carbide Tipped - Micro grain grade provides increased strength and utmost resistance.
  • Use on hand-held routers, laminate trimmers, and table-mounted portable routers..
  • Great performance on all hardwoods, softwoods, plastic laminates and veneered plywood..
Check Stock