Top Industrial Motor Oil

LUMAX LX-1314 Gold/Silver Manual/Pneumatic 2-in-1 Fluid Extractor (2.6G 10L Capacity). Suitable for Brake Fluid, Engine Oil, Gear Oil, Transmission Fluid, Water, etc.

  • Ideal for Extracting or Changing Engine Oils or Lubricants in ATV’s, Boats, Farm Equipment, Industrial Gear Boxes, Motor Vehicles, Motor Bikes, RV’s, etc..
  • Excellent for use with Oil, Coolant and Hydraulic Systems Durable, Oil and Chemical-Resistant Polypropylene Construction.
  • Maximum Fluid Temperature: 176ºF (80ºC).
Check Stock

VICRING Fluid Extractor 200CC Oil Extractor Pump Manual Suction Vacuum Made Plastic Automotive Fluid Syringe Pump Car Fuel Transfer 7oz Syringe Type Oil Pump

  • ...rbox, brakes, steering, differential extraction dispensers) to quickly and cleanly in and out (extraction or dispensing) the liquid extractor..
  • [WIDE APPLICATION]VICRING Oil extractor pump great for extracting or changing engine oils or lubricants in boats, farm equipment, industrial gear boxes, motor bikes, motor vehicles, and ideal for use on vehicles and machinery brake master cylinders, oil filter housings, differentials and gearboxes..
Check Stock

Barnes 104982 Model 2SEV1022L Sewage Pump, 1 hp, 240V, 1 Phase, 2

  • LARGE DISCHARGE CAPACITY: This model is designed with a maximum discharge head of 52-Feet and can pump up to 138 GPM.
  • DESIGNED TO PUMP RAW SEWAGE: Our 2SEV1022L model is a submersible pump that is specifically designed to handle 2-inch spherical solids and is ideal for typical raw sewage applications.
  • HANDLES SPHERICAL SOLIDS WITHOUT CLOGGING: Each pump is designed with a cast iron vortex impeller to allow for easy and effortless passage of 2-inch spherical solids without clogging or backing up.
  • HEAVY DUTY SPLIT CAPACITOR MOTOR: Every pump features a powerful permanent split capacitor motor for reliable, high performance with a longer motor life and a lower amp draw.
  • INDUSTRIAL GRADE: Great for commercial applications, the robust design or this pump features a corrosion resistant stainless steel shaft and hardware, heavy duty cast iron motor housing, and oil lubricated ball bearings.
Check Stock

Campbell Hausfeld Air Compressor, 80 Gallon Vertical Two Stage 25CFM 7.5HP 208-230V 1PH (TF211201AJ)

  • Commercial Duty Cast Iron, Oil-Lubricated, Two Stage Pump with mounted and wired motor starter for quick electrical hookup.
  • Industrial-rate NEMA motor for reliable service with fully enclosed metal belt guard for safe operation.
Check Stock

Metabo HPT Air Compressor, 4-Gallon, Electric, Twin Stack, Portable, Cast Iron, Oil Lubricated Pump, 135 PSI, 1-Year Warranty (EC99S)

  • MOTOR: 15 Amp direct drive induction motor for efficient and reliable performance.
  • PUMP: Cast iron, oil lubricated pump for cooler operation and greater longevity.
  • LIGHTWEIGHT: Only 52.9 lbs for easy jobsite transport.
  • REGULATOR: Locking regulator ensures the proper pressure is delivered to your tool.
  • GAUGES: Industrial air pressure gauges, encased in steel for higher durability.
  • PRESSURE SWITCH: 105 On/135 off pressure switch for less cycling.
  • FAST TOOL CHANGES: Universal quick coupler for fast tool changes.
  • EASY TANK DRAINING: Ball valve drain cock for quick and easy tank draining.
  • OVERLOAD PROTECTION: Motor thermal overload protection stops the motor in a possible overheating situation.
  • METABO HPT: Same tools. New name. Hitachi power tools has renamed to Metabo HPT.
Check Stock

CGOLDENWALL 1500W Commercial Oil Press Machine Oil Extractor Expeller with Intelligent Temperature Controller / Industrial Motor / All Stainless Steel / CE (110V, US Plug)

  • ...T TEMPERATURE HEATING] Our oil press machine is automatically heated at a constant temperature, and the dry materials can be directly put into the machine for pressing. If the material contains water, it needs to be fried to dry enough and then squeezed..
  • [HEAVY DUTY 1500W INDUSTRIAL MOTOR] The high-performance industrial motors provide stable working power and ensure that the machine runs continuously for 24 hours. And the service life of the engine is up to 15 years. Besides, the equipped stainless steel high-speed plasma pressing rod highly promotes oil yield..
  • [INTELLIGENT TEMPERATURE CONTROL] With the combination of the intelligent temperature controller and the machine's heating device, the oil presser can achieve a real-time monitoring and adjustment of the temperature. Temperature Setting: 100-300℃.
  • [DOUBLE BOTTOM COOLING SYSTEM] In addition to the cooling system that comes with the engine itself, the lower part of the machine is also equipped with a forced air cooling system: a dual cooling system that can run continuously in the summer..
Check Stock

Minka-Aire F887-72-ORB Xtreme 72 Inch Outdoor Ceiling Fan with DC Motor in Oil Rubbed Bronze Finish

  • DESIGN: Sleek, Contemporary and Industrial in design, the Minka-Aire Xtreme 72" is designed in an Oil Rubbed Bronze finish with Nine Oil Rubbed Bronze....
  • INCLUDED: RC400 - Six-speed hand-held remote with On/Off plus full-range light dimming, Forward and Reverse function, and 6" Downrod.
  • MOTOR: Conveniently quiet, 6 speed - reversible DC motor. Run Summer and Winter to aid in rotating air and cutting down on energy costs..
  • DIMENSIONS: Measures 13.5'' from the ceiling to the lowest point of the fan with the included 6" downrod. This Sleek Ceiling Fan has a blade sweep....
  • ADDITIONAL: Requires Bond hub BD-1000 (sold separately) to work with Amazon Alexa or Google Home. Optional WC400 wall control can be purchased....
Check Stock

Barnes 112879 Model SP50VFX Submersible Cast Iron Sump Pump – 1/2 HP, 3,960 GPH, 20' Cord, Piggy Back Mechanical Float Switch, For Residential Use

  • SPLIT CAPACITOR MOTOR: For increased reliability, higher performance, longer motor life, great starting torque and lower amp draw.
  • HIGH CAPACITY PUMPING: Large 1-1/2" NPT discharge.
  • ROBUST DESIGN: Stainless steel shaft and hardware.
  • Heavy duty industrial carbon/ceramic seal.
  • THERMAL PROTECTION: Automatic thermal overload protection prevents dangerous overheating and motor failure.
  • LIMITED WARRANTY: Purchase includes a 24-month limited warranty.
Check Stock

HPDMC 10HP Rotary Screw Air Compressor Spin-on Oil Separator 39CFM@125psi 208-230Volt, 3- Phase Skid Commercial Air Compressed System

  • 【Parameters】 Power: 10HP；208-230-Volt, 60Hz, 3- Phase；Working Pressure : Max 125 psi /8 bar；Air Flow : 39cfm；Motor RPM : 3600..
  • 【Simple installation】HPDMC compressors are equipped with easy-to-use, robust and intelligent microprocessor controllers, long-lasting and efficient transfer system,is the leading rotary screw compressor for industrial applications..
  • 【Stable and Durable】Spin-on Air Oil Separator is an integrated separator with element and its own housing. It offers an easy and quick replacing solution for maintenance of air compressors. It significantly reduces oil content of compressed air and returned the filtered oil to compressor air end..
  • 【Service ability】 Service-friendly design implemented using a layout that provides instant access to all consumable items, with quick-release and hinged protective covers and easy-to-use controllers minimizes downtime and reduces maintenance costs..
  • 【Application】 It can widely used for production, pharmaceutical, textile, auto repair, aviation, metallurgical and other industrial fields, can used safely in all applications of small and medium sized businesses..
Check Stock

Campbell Hausfeld Air Compressor, 80-Gallon Vertical Two-Stage 25CFM 7.5HP 208-230V 1PH (CE7000)

  • Commercial Duty Cast Iron, Oil-Lubricated, Two Stage Pump.
  • Mounted and wired motor starter for quick electrical hook up.
  • Industrial-rated NEMA motor for reliable service.
  • Fully enlcosed metal belt guard for safe operation.
  • Bundle this unit with a Camplbell Hausfeld 50 ft. Air Hose (PA121600AV), 17 Piece Acessory Kit (MP284071AV), and the 3-in-1 inflation gun, chuck and guage (MP600000AV).
Check Stock

Yamata FY335A 10\ Arm Cylinder Bed Walking Foot Sewing Machine with Servo Motor and Table.Assembly Required.DIY

  • ✅It come complete with sewing machine table, servo motor, everything (drawer, belt, tools, lamp and instruction manual) brand new, packed in sealed boxes and never been used before. Knockdown Table .DIY, professional assembly may required !.
  • ✅Included accessories in the machine 8100e head: : Bobbin Winder Thread Stand-Machine Oil- Instruction Manual -Oil Pan- Knee Lifter.
  • ✅Juki DDL-8100e Single Needle Lockstitch Industrial Sewing Machine ( NOT a walking foot).
  • ✅Up to 4500 stitches per minute Identical to and replaces DDL-8500 models Replaces popular DDL-MS and DDL-888 models, but has more speed Single-needle Lockstitch Maximum foot lift: 13 mm Maximum stitch length: 5 mm Maximum stitches: 6 stitches per inch. Needles: 9-18 DBX1 (16x231) up to size 19 Sewing Speed max.: 5,500 spm Stitch Length max.: 5 mm Presser Foot Lift by hand, max.: 5.5 mm.
  • by knee, max. 13 mm Needle Bar Stroke 30.7 mm Hook: auto-lubricating full rotary hook Industrial Sewing Machi.
Check Stock

Amalie 160-62836-56 Ford Type F ATF Trans

  • Motorcraft MERCON V is a premium-quality automatic transmission fluid.
  • recommended by Ford Motor Company for use in Ford, Lincoln and Mercury vehicles that require either MERCON V or MERCON type fluid.
  • Do not use in applications where MERCON SP, MERCON LV, continuously variable chain type transmission fluid, Motorcraft premium automatic transmission fluid, FNR5 automatic transmission fluid or Type-F automatic transmission fluid is recommended.
  • Do not use in transfer cases where MERCON ATF was previously recommended.
  • Motorcraft MERCON V is suitable for use as a hydraulic oil in a wide variety of industrial applications that call for an ISO 46 or SAE 20W viscosity grade hydraulic oil.
Check Stock