Top Industrial Router

LINOVISION Industrial Unlocked 4G LTE WiFi Router with SIM Card Slot, 4G VPN Router, Indusrial Cellular Router with one LAN Port, WAN Port and 3 Antenna, Supports T-Mobile, AT&T and DIN Rail Mounting

  • 【4G LTE Router Certified by AT&T】LINOVISION Industrial LTE Router, secure wireless routing for industrial remote access, provides a solution for user's device to access 4G network. Supports Band 2/4/5/12, also compatible to T-Mobile Network. It is unlocked, you can use it with any mobile carriers that using the same frequency bands. Use Standard 6-pin SIM card (not micro/nano). Please check your local coverage before purchasing..
  • 【Industral Design & Wide Coverage】Industrial design, rugged metal casing, DIN rail mounting and hardware watchdog. The 3-Antenna Design delivers better performance. Compared to the 2-antenna design, it has better performance, wider signal coverage, and faster network speed(4G LTE Router uses 5dbi 4G antenna and 3dbi high gain antenna Distance can reach to 100 meter in open area). Working Voltage DC 5V to 36V. Temperature -4 ℉ to 158 ℉ (-20 ℃ to 70 ℃)..
  • 【Supports Multiple Protocols】This high speed 4G LTE router Supports DHCP, VPN Client (PPTP/L2TP/IPSEC/PPPOE/OPENVPN), Static IP, DDNS and port forwarding. Providing reliable, seamless connectivity for M2M & IoT applications.
  • 【LAN WAN WiFi】Supports 802.11 b/g/n WLAN. It provides one LAN port, one WAN/LAN switchable port and WiFi access. It is widely used fo....
Check Stock

SpeTool Spiral Flush Trim Router Bit,1/4 Inch Shank 1-1/8 Inch Cutting Length Extra Long 3 Inch OVL,UP Down Compression Bit for Wood Trimming

  • Sturdy Durable: The flush cut router bit is made of premium carbide according to stringent Industrial grade quality standards provide tough, resists wear and high cutting performance..
  • Sharp Efficient: The flush-trim spiral router bits is sharper and stay sharp longer than conventional flush-trim router bits.provide better chip evacuation, less heat buildup, and cleaner edges..
  • Smooth Stable: The router bearing bit uses a double ball bearing pilot at the tip to run against your project template ensure smooth running..
  • Wide Application: This flush trim bit can be used for any flush trim situation and is an excellent choice for pattern or template work..
  • Compatibility: The spiral flush trim Router Bits is perfect for soft woods, hard woods, Plywood, laminate, OAK, MDF and any hardwood working. It can be used with table mount and handheld router with 1/4" collet..
Check Stock

FivePears 2 Pieces of Tongue and Groove Router Bits Set with 1/4 Shank,3 Teeth T Shape Wood Milling Cutter Woodworking Tool

  • ★【Main Size 】Industrial Class Router Bits,Tooth width: 1/4 inch,Shank Dia: 1/4 inch..
  • ★【Main Feature】3 Teeth T-shape bits set for furniture,inlcude 1pcs*Tongue Router Bit,1pcs*Groove Router Bit..
  • ★【Application】The router bits set perfect for handmaking a drawer, wood floor, wainscot paneling and shaker style panel doors and other....
  • ★【Anti-Kickback Design】Solid hardened steel bodies with anti-kickback design 3 teeth T-shape with anti-kickback design..
  • ★【Important Safety】Slowly push,RPM.
Check Stock

BOSCH PR001 Fixed Base for the BOSCH Colt PR20EVSK & PR20EVSNK Palm Routers , Blue

  • 3 WINGS WOOD CNC ROUTER BIT: Shank: 1/4”.
  • HIGH QUALITY CNC SURFACING ROUTER BIT: The sharp carbide tipped bit, solid hardened steel bodies with anti-kickback design. Build up with heat resistant Teflon coating which can reduce resin build-up for fast and easy cleaning. This CNC router bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications, BINSTAK router bit can withstand some heavy duty use and the test of time..
  • VERSATILE ROUTING TOOl: This professional bottom cleaning router bit is not only perfect for wood slab flattening, resurface or plane the top surface of the spoilboard, but also for trimming and slotting/grooving. Great replacement bit tool for woodworking carpenter!.
  • USE RANGE for CNC ROUTING BITS: Suitable for solid woods, MDF, laminate, particle board, plywood compact panel, acrylic and etc. Avoid cutting metal and non-wood materials..
  • Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Such as woodworking engraving machine, trimming machine..
Check Stock

KOWOOD Pro Roundover Bit Set 4 Pcs, 1/4 Inch Shank, R:1/8\

  • KOWOOD Pro Roundover router bit set is an upgraded new product. Which is specifically designed for the high quality demanded by woodworking industrial application..
  • KOWOOD PRO C3 carbide with a new process of heat treatment shank support this set of bits in heavy-duty and maximum durability..
  • Precisely machined carbide for clean and accurate trimming, grooving for all types of wood material..
  • Wide use application and suitable for woods, laminate, particle board, plywood compact panel..
  • Universal 1/4” Shank is suitable for all major benchtop router table such as KOWOOD, Bosch, DeWalt, Tooldo, Makita, Milwaukee, MNA, Porter & Cable, Skil, Ryobi, Black & Decker. (Benchtop router table use only)..
Check Stock

HandsEase 1/2\ Shank Router Bit 45 Degree Glue Joint Lock Miter Woodworking Tools Set

  • 45° lock miter router bit set to join boards at 90°, suitable for density boards, solid wood, MDF, chipboard, splints, etc..
  • The largest miter lock bit has a 2-3/4" diameter and is suited for up to 1" thick stock.
  • The medium sized lock miter router bit has a 2" diameter and is suited for 3/4" stock.
  • the smallest miter lock bit is 1-3/8" diameter and will work best with 1/2" stock.
  • Blade: Industrial grade micro grain carbide.
Check Stock

Upcut Spiral Flush Trim Router Bit, 1/4 Inch Shank Solid Carbide Flush Trim Router Bits Spiral with Nano Coated by EANOSIC (1/4\ Shank Up-Cut)

  • Professional Flush Trim Router Bit with Top Bearing: 1/4” Shank, 1” Cut Length. The two independent ball bearings with forced on steel collars at the tip of each bit ensures smooth worry free use..
  • INDUSTRIAL QUALITY UPCUT FLUSH TRIM ROUTER BIT: Made of solid VIRGIN carbide with NANO blue coated. And Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality..
  • Up to 2.5X longer life compared to uncoated bits..
  • The 1/4-Inch flush trim Router Bits apply to various wood: such as Plywood, OAK, MDF, and any hardwood working and Long service life for sharp..
  • The spiral router bit suit for CNC router and any plunge routers with 1/4" collet..
Check Stock

JessEm Rout-R-Table Stand Bundle with JessEm Phenolic Mast-R-Top 24 x 32-Inch Router Table Top, Mast-R-Fence II Router Table Fence and JessEm Rout-R-Lift II Router Lift (4 Items)

  • Bundle Includes: JessEm Rout-R-Table Stand, JessEm Phenolic Mast-R-Top 24 x 32-Inch Router Table Top, JessEm Mast-R-Fence II Router Table Fence, JessEm Rout-R-Lift II Router Lift for Porter Cable, Dewalt and Bosch Routers with 3.5-Inch Diameter Motors.
  • Aluminum Dual Track: The JessEm Mast-R-Top comes with an extruded anodized aluminum dual track with a T-slot that accepts standard 1/4-inch hex head bolts or hex nuts and a standard 3/4-inch miter slot.
  • Router Table System: The table top comes pre-machined to fit JessEm’s Mast-R-Lift, Rout-R-Lift II, and Rout-R-Plate lift and router plates for building a router table system.
  • Premium Material: Made from laminated phenolic, which is one of the strongest, stable, and durable materials available for an industrial strength work surface.
  • Compatibility: The Table Top features a centered router opening measuring 9-1/4 x 11-3/4 inches that accepts most standard router plates and lifts (3/8-inch thick).
Check Stock

Downcut Spiral Flush Trim Router Bit, 1/4 Inch Shank Solid Carbide Flush Trim Router Bits Spiral with Nano Coated by EANOSIC (1/4\ Shank Down-Cut)

  • Professional Downcut Flush Trim Router Bit with Top Bearing: 1/4” Shank, 1” Cut Length. The two independent ball bearings with forced on steel collars at the tip of each bit ensures smooth worry free use..
  • INDUSTRIAL QUALITY DOWN-CUT FLUSH TRIM ROUTER BIT: Made of solid VIRGIN carbide with NANO blue coated. And Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality..
  • Up to 2.5X longer life compared to uncoated bits..
  • The 1/4-Inch downcut spiral flush trim Router Bits apply to various wood: such as Plywood, OAK, MDF, and any hardwood working and Long service life for sharp..
  • The downcut spiral router bit suit for CNC router and any plunge routers with 1/4" collet..
Check Stock

CNC Spoilboard Surfacing Router Bits 1/2 inch Shank 2 inch Cutting Diameter Slab Flattening Router Bit Planing Bit Wood Milling Cutter Planer Woodworking Tool by BINSTAK Carbide

  • 3 WINGS WOOD CNC ROUTER BIT: Shank: 1/2".
  • HIGH QUALITY CNC SURFACING ROUTER BIT: The sharp carbide tipped bit, solid hardened steel bodies with anti-kickback design. Build up with heat resistant Teflon coating which can reduce resin build-up for fast and easy cleaning. This CNC router bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications, BINSTAK router bit can withstand some heavy duty use and the test of time..
  • VERSATILE WOODWORKING TOOlS: This professional bottom cleaning router bit is not only perfect for wood slab flattening, resurface or plane the top surface of the spoilboard, but also for trimming and slotting/grooving. Great replacement bit tool for woodworking carpenter!.
  • USE RANGE for CNC ROUTER BIT: Suitable for solid woods, mdf, laminate, particle board, plywood compact panel, acrylic and etc. Avoid cutting metal and non-wood materials..
  • Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Such as woodworking engraving machine, trimming machine..
Check Stock

CNC Spoilboard Surfacing Router Bit 1/2 Shank Slab Flattening Router Bit Carbide Planer Router Bits Wood Milling Cutter Planing Tool Woodworking Tools by BINSTAK

  • 4 WINGS WOOD CNC ROUTER BIT: Shank: 1/2".
  • HIGH QUALITY CNC ROUTER BIT: The sharp carbide tipped bit, solid hardened steel bodies with anti-kickback design. Build up with heat resistant Teflon coating. This CNC router bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications, BINSTAK router bit can withstand some heavy duty use and the test of time..
  • VERSATILE WOODWORKING TOOl: This professional bottom cleaning router bit is not only perfect for wood slab flattening, resurface or plane the top surface of the spoilboard, but also for trimming and slotting/grooving. Great replacement bit tool for woodworking carpenter!.
  • USE RANGE: Suitable for woods, mdf, laminate, particle board, plywood compact panel, acrylic and etc. Avoid cutting metal and non-wood materials. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Such as woodworking engraving machine, trimming machine, etc..
  • GIFT: Router Collet Reduction Sleeve Tool Bit. For turning Electrical and mechanical wood carving milling chuck connector from 1/2" to 1/4". Inner diameter: 6.35 MM. Outside diameter: 12.7 MM.
Check Stock

CNC Spoilboard Surfacing Router Bit, 1/2\ Shank 2\ Cutting Diameter, Insert Carbide Slab Flattening Router Bit Planing Bit Wood Planer Bit by BINSTAK

  • 3-WING INSERT CNC ROUTER BIT: Shank: 1/2".
  • Carbide Inserts: 12*12mm. 3-wing design, resulting in a more balanced tool while running..
  • INDUSTRIAL GRADE CNC WOOD ROUTER BIT: Super-strength steel body with anti kickback design, 3 cutting blades..
  • COST-EFFECTIVE INSERT BIT: The surfacing router bit utilizes 4-sided solid carbide inserts. All 4 edges of carbide inserts can be used, use a screwdriver to make other blade edge outside. Replace the carbide inserts when needed, instead of replacing the whole bit. Cost effective solution compared to brazed router bits and solid carbide spiral bits..
  • This planer router bit is perfect for wood slabs flattening, resurface or plane the top surface of the spoilboard. Used on soft and hard woods, particle board, MDF, plywood compact panel, laminate, acrylic and etc..
  • Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Such as woodworking engraving machine, trimming machine, etc..
Check Stock