Top Industrial strength Die Set

Tysun Crimping Tool Kit Ratcheting Crimper Plier Set with 1550 Pcs 2.54mm Dupont Connectors and 460 Pcs 2.54mm JST-XH Connectors for AWG 26-18(0.1-1mm²)

  • High Quality Material - The crimping tool is made of high quality Alloy Steel and ABS. It creates a sturdy and perfect crimp for DIY electronics, industrial, home improvements and more..
  • Crimping Size Range - AWG26-18(0.1-1mm²), it can be used for XH2.54, dupont2.54/3.96mm, KF2510/JST connectors and so on..
  • Lightweight and Portable - Ratcheting crimper plier set is easy to carry and store the accessories at home or work, and can be easily put in your bag, toolbox, and car, convenient for your works..
  • Perfect Workmanship - This terminal crimping tool is produced with a wire-electrode cutting die set, can make for a more perfect, precise, and accurate crimp result. Ratcheting mechanism design can help you to save energy and strength..
  • Package Includes - This crimping tool set comes with 1550 PCS 2.54mm connectors for dupont, 460 PCS 2.54mm connectors for JST-XH and 1.5m 10-wire ribbon cable..
Check Stock

Qibaok Crimping Tool Kit Ratcheting Crimper with 1550PCS 2.54mm Dupont Connectors and 760pcs 2.54mm JST-XH Connectors for AWG 26-20(0.1-0.5mm²)

  • Set Includes: This Ratcheting Crimper set comes with 1550 PCS 2.54mm dupont connectors, 760 PCS 2.54mm JST-XH connectors and 1.5m 10-wire ribbon cable..
  • High Quality Material:Made of high quality Alloy Steel and ABS. It creates a sturdy and perfect crimp for DIY electronics, industrial, home improvements and more..
  • Applications:Suitable for AWG26-20（0.1-0.5mm²） .Crimping tool is suitable for XH 2.54mm / C3-R 2.54mm / Dupont 2.54mm / JST type connectors / KF2510 / EPS / PCIE / SATA connectors etc..
  • Perfect Workmanship: This terminal crimping tool is produced with a wire-electrode cutting die set. It can make for a more perfect, precise, and accurate crimp result. It also has a ratcheting mechanism design which can also help you to save energy and strength. Comfortable to use and easy to Operate..
  • Friendly Customer Service & Warranty: We stand behind the quality of our products. If for any reason you are not satisfied with your purchase, please do not hesitate to contact us. Thank you~.
Check Stock

86-Piece Master Tap and Hex Die Set, Premium Titanium Coating | SAE Size #4 to 5/8”, Metric Size M3 to M16 | For All Coarse, Fine, Pipe Threads | Complete with Holders, Stocks, Gauges and Metal Case

  • ...is is a master tap & die set that includes a full range of SAE standard and Metric sizes from small to large with both coarse and fine teeth, designed for all kinds of internal and external threading, rethreading, or thread repairs jobs.
  • [PREMIUM MATERIAL AND COATING]: Industrial grade high speed steel (HSS) construction with unique titanium coating provides maximum strength and lasts 3 times longer than normal ground finished tap die for rust and corrosion prevention.
  • [EXCELLENT CUTTING PERFORMANCE]: All cutting teeth are precisely CNC machined and accurately heat treated to Rockwell hardness 60 HRC for best threading performance on a wide range of materials such as wood, carbon steel, cast iron, aluminum, brass, copper, stainless steel.
  • [HEXAGONAL SHAPE DIES]: Hex dies can be used with wrenches and sockets for added leverage, so they work much better than round dies for greater torque applications and in tight spaces. Hexagon dies fit both needs to create new thread or chase old thread, while round dies are usually to create thread only.
  • [COMPLETE SIZE COVERAGE]: Set includes....
Check Stock

Carbyne Pistol Grip Grease Gun and 12 Piece Grease Gun Accessory Set

  • Grease Gun: Heavy Duty Pistol Grip Handle for Ease of Use. 18 inch Heavy Duty Reinforced Flex Hose with Spring Guard. Die Cast Head..
  • Grease Gun: Air Bleeder Valve Quickly Eliminates Air Pockets..
  • Grease Gun Accessory Set: All-In-One Set Includes Couplers, Nozzles, Adapters and Flex Hose..
  • Grease Gun Accessory Set: Grease Gun Accessories Engineered To Withstand Rugged Use..
  • Grease Gun Accessory Set: Ideal For Automotive & Trailers, Agriculture, Industrial and Marine Use..
Check Stock

Carbyne Pistol Grip Grease Gun and 12 Piece Grease Gun Accessory Set

  • Grease Gun: Heavy Duty Pistol Grip Handle for Ease of Use. Anodized Aluminum Barrel. 12 inch Heavy Duty Reinforced Flex Hose with Spring Guard..
  • Grease Gun: Die Cast Head. Air Bleeder Valve Quickly Eliminates Air Pockets. Includes 6 inch Rigid Extension & Non-Slip Rubber Grip..
  • Grease Gun Accessory Set: All-In-One Set Includes Couplers, Nozzles, Adapters and Flex Hose..
  • Grease Gun Accessory Set: Grease Gun Accessories Engineered To Withstand Rugged Use..
  • Grease Gun Accessory Set: Ideal For Automotive & Trailers, Agriculture, Industrial and Marine Use..
Check Stock

Irwin Tools 7736 Irwin Re-Threading Hex Die-3/8\-24 NF, HCS Left Hand Die-Bulk

  • Made of heat treated carbon steel, high strength and hardness.
  • 【Advantage】- Threading dies are used to form or cut a male thread on the outside of rods or bars. Threading dies provide precision in cutting and extend the life of a die by reducing wear..
  • 【Application】- Threading dies are commonly used in industrial metal working and for repairing threads in stripped holes or bolts. Rolled threading dies have an increased advantage of strength, longer life, and reduced material cost..
  • 【Function】- There are a variety of ways in which threading dies function.Threading dies cut a male thread and are used with taps that cut the mating female threads..
  • 【Warm Prompt】- Different sizes can be chosen on this listing. Please check what you need before purchasing..
Check Stock

Muzerdo 110PCS Standard Sae and Metric Bearing Steel Tap and Die Rethreading Kit

  • Tap wrenches (M3-M12 x 1/16”-1/2”, M6-M20 x 1/4”-3/4”).
  • Die wrenches (25mm x 1”, 38mm x 1-1/2” OD).
  • BUILT TO LAST: Constructed from chromium-coated high carbon steel for maximum strength and corrosion resistance.
  • Metric tap set has 3-4 flute abrasive cutting edges each so you can easily clean/repair and cut materials such as aluminum, iron, cast iron, alloy steel, carbon steel, abrasive steel, malleable cast iron, and other difficult to machine metal materials.
  • EASY STORAGE: Heavy-duty 17” x 2.25” x 12.75” inch (43.2cm x 5.7cm x 32.4cm) plastic blow-molded carrying case with 2 side latches and built-in handle for easy transportation, safe storage, and quick organization.
  • Each compartment is labeled with sizing for simple identification.
  • PACKAGE CONTENTS: Combination set contains both metric taps and dies.
  • Tap die set metric tap die metal threader package includes 35 taper taps, 35 plug taps, 35 dies, 2 tap holder wrenches, 2 die holder wrenches, 1 T-bar type tap wrench, and 1 carrying case.
  • (Thread pitch gauge not included, but we recommend using these taps to light up threads from the bolt).
Check Stock

DZNTOOLS Rivet Dies Eyelets Grommets Molds Snap Dies Prong Set Popper Fastener Hand Press Machine

  • Rivet Dies Eyelets Grommets Molds Snap Dies Prong Set Popper Fastener Hand Press Machine.
  • 1 piece of Hand Press Machine 1 set of Snap Die 10 mm 1 set of Snap Die 12.5 mm 1 set of Snap Die 15 mm 1 set of Rivet Die 5 mm 1 set of Rivet Die 6 mm 1 set of Rivet Die 7 mm 1 set of Rivet Die 9 mm 1 set of Rivet Die 11 mm 1 set of Eyelet Die 4.5 mm 1 set of Eyelet Die 5.4 mm 1 set of Eyelet Die 6 mm 1 set of Eyelet Die 7.5 mm 1 set of Eyelet Die 9 mm 1 piece 2mm Hole Puncher 1 piece 4mm Hole Puncher 1 piece Brass Base for a hole cutter.
  • Suitable for leather, fabrics, jeans, costumes etc..
Check Stock

4inch Omni-Directional Wheel,Omni Wheels for Industrial Robots,360-degree Universal Wheel Industrial Robot Parts

  • The hub of this omnidirectional wheel is metal and is die-cast through precision molds..
  • 10pcs driven rollers are rubber, which greatly increases the strength, robustness and traction of the robot..
  • 10 driven rubber rollers, the robot can perform 360-degree maneuverability and rotation, including lateral movement and oblique movement..
  • The Omni-directional wheels are unique as they are able to roll freely in all directions..
  • This omnidirectional wheel is an essential accessory for industrial robots..
Check Stock

Omni Wheel Robot Car Kit, 2Pcs 3in Metal Omnidirectional Wheel with 10 Driven Neoprene Rollers, Industrial Robot Parts

  • The hub of this omnidirectional wheel is metal and is die-cast through accuracy molds.
  • 10pcs driven rollers are rubber, which greatly increases the strength, robustness and traction of the robot..
  • By using 10 driven rubber rollers, the robot can perform 360-degree flexibility and rotation functions, including lateral movement and oblique movement.
  • High quality and great processing, good accessories for industrial robot.
  • Including 2pcs omnidirectional wheels, convenient to replace.
Check Stock

Crimping Tool Kit, Preciva Dupont Ratcheting Crimper Plier Set with 1550PCS 2.54mm Dupont Connectors and 460pcs 2.54mm JST-XH Connectors for AWG 26-18(0.1-1mm²)

  • [Precise and Perfect Workmanship]: This terminal crimping tool is produced with a wire-electrode cutting die set. It can make for a more perfect, precise, and accurate crimp result. It also has a ratcheting mechanism design which can also help you to save energy and strength..
  • [Crimping Size Range]: AWG26-18(0.1-1mm²), it can be used for XH2.54, dupont2.54/3.96mm, KF2510/JST connectors and so on..
  • [1550PCS Dupont connectors and 460PCS JST-XH connectors]: This crimping tool set comes with 1550 PCS 2.54mm dupont connectors, 460 PCS 2.54mm JST-XH connectors and 1.5m 10-wire ribbon cable. You can choose what you need for your work..
  • [High Quality Material]: The crimping tool is made of high quality Alloy Steel and ABS. It creates a sturdy and perfect crimp for DIY electronics, industrial, home improvements and more..
  • [After-Sales Service]: Please read the description and the specifications before you purchase. If there are any problems, please contact us directly..
Check Stock

80-Piece Premium SAE and Metric Tap and Die Set - SAE Inch Size #4 to 1/2” and Metric Size M3 to M12 with Coarse Fine and Pipe Threads | Essential Threading Kit with Complete Handles and Accessories

  • ▲ ALL-IN-ONE SET - This is a complete tap & die set that includes all essential SAE and Metric sizes with both coarse and fine teeth, designed for all kinds of internal and external threading, rethreading or thread repairs jobs.
  • ▲ PREMIUM MATERIAL AND DURABILITY - Industrial grade GCr15 bearing steel construction for maximum strength and longevity to withstand professional uses and ensure durability.
  • ▲ EXCELLENT CUTTING PERFORMANCE - All cutting teeth are precisely CNC machined and accurately heat treated to Rockwell hardness 60 HRC for best threading performance.
  • ▲ VERSATILITY AND WIDE APPLICATION - Perfect to create new threads or repair damaged threads on most metals like carbon steel, cast iron, aluminum, brass, copper and stainless steel.
  • ▲ MOST POPULAR SIZES - Comes with: (34) pc. most common SAE standard taps dies 1/2, 7/16, 3/8, 5/16, 1/4, 12, #10, #8, #6, #4.
  • (34) pc. most common Metric taps dies M12, M10, M8, M7, M6, M5, M4, M3.
  • plus (12) pc. comprehensive accessories of wrenches, handles, gauges, screwdrivers and storage cases.
Check Stock