Top Infrared Receiver Led

Dorhea 4Pcs Digital 38khz Ir Receiver Sensor Module + 4Pcs 38khz Ir Transmitter Sensor Module Kit for Electronic Building Block

  • The infrared transmitter module is directly transmitted by a single tube, and the waveform needs to be modulated by the program..
  • Adopt 1838 remote control receiver with high sensitivity..
  • with the emission signal indicator LED, easy to observe and debug..
  • Can be used for remoter control,Can be compatible with wrobot digital 38KHz IR transmitter sensor..
  • Widely used in infrared communication, infrared remote control, apply to a variety of platforms including for Raspberry pi/51/AVR/ARM..
Check Stock

KERUI Wireless Split Welcome Motion Sensor Alert Alarm System Doorbell Door Bell with Long Range Receiver and Transmitter Home or Office Security Protection for Front Doors Entryways Garages

  • LONG RELIABLE RANGE:Communication range of up to 150m/490ft (the distance from the sensors to the receiver In THE OPEN AIR) and Door chime triggered....
  • DIFFERENT CHIME TONES:The receiver is a doorbell design with 32 different ringtones for personal preferences ,press "music"button to choose,4 levels....
  • VISUAL ALERTS:When infrared motion sensor detect any movement, the Receiver will make an audible sound & the LED light will flash.
  • WIDE APPLICATION:Use as a welcome doorbell chime at daytime and a burglar alarm system at night.
  • can be used at doors,doorway,driveways,walking paths....
Check Stock

Shaogax Motion Sensor Alarm System, Wireless Home Security Driveway Alarm Indoor, Motion Detector Alert with 2 Sensor and 1 Receiver -38 Chime Tunes

  • ...of 3 ways of being alerted (Sound/LED Flash/Sound and LED Flash) and 3 volume levels from 25-80dB. You can also select from 38 Ringtones with Bright LED Light..
  • 【Wireless Plug-in Receiver】: The portable wireless plug-in receiver plugs into any standard outlet. The sensor uses 3 AAA batteries (Not Included). Infrared sensor detects motion and sends a signal to the receiver. Detection time delay in between motion sensor alerts is configurable from 15 seconds to 30 seconds, just place the sensor at the entrance to your driveway and the receiver inside your home..
  • 【Long Distance Wireless】: Working range up to 328 feet (100 meters) between receiver and transmitter allowing you to place it a good distance. It can be alerted to visitors, notice door opening, scare off unwanted intruders, or even know when your children have accessed restricted areas..
  • 【Easy and Fast Installation】: This monitor system is fully-expandable, with plug-and-play sensors that can be set up within minutes. The sensors can be mounted to walls, fence posts, trees, or any other surface, for full coverage of your property..
  • 【Wide Range of Uses】: Ideal for front doors, hallway, window frames, driveways, walking paths, and anywhere in your home you want to be alerte....
Check Stock

SZBJ IR Remote Control Extender Cable,IR Repeater Kit Cable,IR Repeater Cable 4 Emitter

  • ...REMOTE CONTROL} cable extends the signal to a video source like a Blu-ray player so it can be controlled from your HDTV.
  • Red LED in IR Receiver bulb verifies the signal transmission(Operating range:20-60HZ).
  • {HOME THEATER ACCESSORY} repeats the IR signal to a DVD player, STB box, Receiver or other A/V source with an infrared sensor.
  • Route the cable out of sight with a wall mounted HDTV.
  • Install the IR Transmitter end in a concealed equipment closet to hide a CATV box and control it remotely.
  • {SIMPLE INSTALLATION} of this lightweight IR cable.
  • Locate the IR Blaster near the source sensor to repeat the signal to the source.
  • Place the IR Receiver in a convenient location with line of sight of your hand-held remote.
  • IR Tx and Rx cables have adhesive circles on the back for mounting.
  • {UNIVERSAL COMPATIBILITY} with most A/V equipment with infrared sensors (not RF).
  • 180 degree IR Receiver angle provides plenty of leeway to get the right angle with your remote.Remote control signal receiving real-time response to fast forward without delay.
  • {USB POWERED IR }extension cable has an integrated 6 foot Y-cable to receive 5V USB power.
  • Connect to an HDTV USB port or to a USB wall charger(Tip: Devices that need remote control must be placed in a place where your r....
Check Stock

WJLING Motion Sensor Alarm, Wireless Driveway Monitor Alarm, Home Security Business Detect Alert with 3 Sensor and 2 Receiver, 38 Chime Tunes - LED Indicators

  • ...of 3 ways of being alerted (Sound/LED Flash/Sound and LED Flash) and 3 volume levels from 25-80dB. You can also select from 38 Ringtones with Bright LED Light..
  • 【Wireless Plug-in Receiver】: The portable wireless plug-in receiver plugs into any standard outlet. The sensor uses 3 AAA batteries (Not Included). Infrared sensor detects motion and sends a signal to the receiver. Detection time delay in between motion sensor detector alerts is configurable from 15 seconds to 30 seconds, just place the sensor at the entrance to your driveway and the receiver inside your home..
  • 【Support Long Distance Connection】: Working range up to 328 feet (100 meters) between receiver and transmitter allowing you to place it a good distance. It can be alerted to visitors, notice door opening, scare off unwanted intruders, or even know when your children have accessed restricted areas..
  • 【Applicable places】: Ideal for front doors, hallway, window frames, driveways, walking paths, and anywhere in your home you want to be alerted to motion. Also great to alert business owners that are working in the back, or out of sight, to customers entering their store.Please note that this not waterproof. Keep it away from rains or cover adequately..
Check Stock

uxcell IR Infrared Receiver Extender Cable 3.5mm Jack 4.9FT Long 26-39FT Receiving Distance Red Head 5pcs

  • Product: IR Infrared Remote Control Receiver Cable.
  • Wide angle, strong signal, long distance. Resistant to ambient light effects. Works with all 38-56kHz IR remote control and devices with an IR input port..
  • Wide voltage adaptation, low power consumption, high sensitivity, excellent anti-interference characteristics, tiny, elegant stick-on design..
  • Widely used in set-top boxes, LED light bar controllers, driving recorders, digital photo frames, household appliances, and other various products to assist in extending remote control reception..
  • Note: Please confirm whether the electrical equipment has an infrared interface and confirm the size of the infrared interface. Stick the infrared received head to the side of the IR sensor, do not cover it, otherwise, the remote control will be insensitive..
Check Stock

MEGA 2560 Starter Kit Ultra (100% Arduino IDE Compatible) w/ Battery Holder, Sensors, Modules, Resistor kit and Components (no Supply)

  • ...nsor -Tilt detector module -Servo SG90 motor -Stepper motor (5V) -Motor driver module for stepper motor ULN2003.
  • 5V Active Buzzer -5V Passive Buzzer -LCD 1602 16 characters * 2 lines -LED Display Driver MAX7219 -LED Matrix Display of 8*8 -7 Segments Display 1 digit -7 Segments Display 4 digits -Simple Relay Module - Infrared Remote Control 38kHz - 38kHz Infrared decoder receiver (type 1838) - Infrared phototransistor (Flame sensor) - Infrared LED - Light sensor (Photoresistor).
  • -10 * LEDs 5mm Diffused RED -10 * LEDs 5mm Diffused GREEN -10 * LEDs 5mm Diffused YELLOW -5 * LEDs 5mm Ultrabright WHITE diffused -3 * LEDs 5mm Red / Green / Blue Diffused RGB -Shift Register (Series to Parallel IC) 74HC595 - NPN Transistor BC547 - PNP Transistor BC557 - Adjustable Knob Resistor 1kOhm (Potentiometer) - Adjustable Knob Resistor 10kOhm (Potentiometer).
  • - Resistor Pack 1/4W 1% accuracy, with 10pz of each value: 100, 220, 330, 470, 1K, 2K2, 4k7, 10K, 22K, 47K, 100K, 220K, 1M - 40-pin header 2.54 mm -40-pin header at right angle 2.54mm -5 * Capacitors for bypass tantalum 0.1uF -5 * Jumpers for header.
Check Stock

IR Repeater Neoteck Infrared Remote 1 Receiver 4 Emitters Control Kit Hidden IR System USB Adapter for Amplifier Cable Box Stereo Receiver Satellite TV Receiver CD Player DVD Player Blu-ray Player

  • Hidden IR Repeater 1 Receiver 4 Emitters Infrared Remote Control Kit, You can Control Your Home Theater Device/Components Which are Kept behind Closet....
  • Receiver: with a Convenient IR Confirmation LED and Pick up the Signal from the Remote Controller.
  • Emitter: Send the Signal to the A/V Components.
  • 34-60kHz Operating Range(Please Aim at IR Receiver when Using Remote Control).
  • 5V USB AC Power Supply, Support Amplifier, Cable Box, Stereo Receiver, Satellite TV Receiver, CD Player, DVD Player, Blu-ray Player or any other....
Check Stock

Infrared Remote Extender Cable -ir Extender for Cable Box Hidden IR Repeater System with 1 Emitters 1 Receiver (20FT)

  • ...EMOTE CONTROL} cable extends the signal to a video source like a Blu-ray player so it can be controlled from your HDTV.
  • Red LED in IR Receiver bulb verifies the signal transmission，Operating range:20-60HZ.
  • {HOME THEATER ACCESSORY} repeats the IR signal to a DVD player, STB box, Receiver or other A/V source with an infrared sensor.
  • Route the cable out of sight with a wall mounted HDTV.
  • Install the IR Transmitter end in a concealed equipment closet to hide a CATV box and control it remotely.
  • {SIMPLE INSTALLATION} of this lightweight IR cable.
  • Locate the IR Blaster near the source sensor to repeat the signal to the source.
  • Place the IR Receiver in a convenient location with line of sight of your hand-held remote.
  • IR Tx and Rx cables have adhesive circles on the back for mounting.
  • {UNIVERSAL COMPATIBILITY} with most A/V equipment with infrared sensors (not RF).
  • 180 degree IR Receiver angle provides plenty of leeway to get the right angle with your remote.Remote control signal receiving real-time response to fast forward without delay.
  • {USB POWERED IR }extension cable has an integrated 6 foot Y-cable to receive 5V USB power.
  • Connect to an HDTV USB port or to a USB wall charger(Tip: Devices that need remote control must be placed in a place where your r....
Check Stock

Micomlan 16ft/5M Led Strip Lights , Controller and Bluetooth APP Controlled Lights for Bedroom Home Decoration，Music Sync Color Changing RGB LED Lights with Remote

  • 【Unique Controller & Remote】The fixed and raised infrared receiver is easier to receive signals than the previous infrared receiver plug-in the line, which with a range of up to 360°, so there is no any difficulty to control the strip lights in the room wherever you are, very simple and easy using. LED Strip Lights has High-strength adhesive, 0.8mm thickness, general adhesive thickness only 0.14mm, the trusted self-adhesive backing tape is mounted on every strip..
  • 【APP Bluetooth control & music sync】1. Through the ""Ehome Light"" APP (Available on Google Play and iOS App Store) can control the color and brightness of the light strips, and you can DIY your own colors. 2. LED strip light bluetooth has music mode and Mic mode, the light color will change with the music rhythm or your voice. 3. Using timing mode, arrange your RGB LED strip to turn on or off within the set time..
  • 【More User-Friendly Ways to Control Your Lights】 Control the LED strip lights via (APP+ IR Remote+Mic+3 buttons )， ①APP control: 16 million colors, 22 dynamic modes, music and mic functions, brightness and speed can be controlled through the mobile phone control strip. ② 20-key 4 music mode IR remote control, even a child can operate ③ 3-button controller ....
Check Stock

Driveway Alarm-328ft Long Range Wireless Driveway Alarm Outdoor Weather Resistant Motion Sensor & Home Security Business Detector Alert System-Protect Outdoor/Indoor Property -1 Receiver and 1 Sensors

  • ...withstands various harsh weather conditions.
  • wireless driveway alarm for home, apartments, school, villas, offices, warehouses, hotels, factories, hospitals and more..
  • 【Wireless Plug-in Receiver】The portable wireless plug-in receiver plugs into any standard outlet. The sensor uses 3 AAA batteries (Not Included). Infrared sensor detects motion and sends a signal to the receiver. Detection time delay in between motion sensor alerts is configurable from 15 seconds to 30 seconds, just place the sensor at the entrance to your driveway and the receiver inside your home..
  • 【3 Alert Options & 39 Chimes】The wireless outdoors sensor features 3 Alert Options (Audio Chimes/Flashing/Chimes and LED), 39 chimes and 3 volume levels from (0db to 80dB) to suit your needs. Different sensors can be set to a different tone，you can know which sensor triggered the alarm by the different tone..
  • 【328 Feet Long Wireless Transmission Range】Working range up to 328 feet (100 meters) between receiver and transmitter allowing you to place it a good distance. and the sensors' detection range is up to 23 feet. We use newer technology components and excellent manufacturing techniques. Improving the design of the infrared detection chip and the detection angle to reduce the ....
Check Stock

JENSEN JCR-231 Digital AM/FM Dual Alarm Clock Radio with Wave Sensor

  • AM/FM Receiver with PLL Tuning and 20AM + 20FM Presets, Auxiliary Input Jack for Connecting Your iPod, MP3 or other Digital Audio Players.
  • Dual Alarm with Snooze and Weekend Cancellation, Wake to Radio or Alarm, Sleep to Radio, 7 Time Zones and Daylight Saving Time Switchable.
  • 1.2” Green LED Display, High/Low Dimmer Control, Calendar and Indoor Temperature Display, Power Saving Mode - Display Automatically Turns Off after 15 seconds to Conserve Energy.
  • Infrared Snooze Sensor, Infrared Display Indoor Temperature, Alarm Time or Radio Frequency Sensor.
  • Power: AC120V 60Hz, Battery Back-up for Clock: 1 x CR2032 Lithium Battery (Not included).
Check Stock