Top Injection Mold die

LYECUN Watch Press Set Back Case Closer, Watch Crystal Press, Watch Press Set, Watch Battery Replacement Tool

  • ..., it applies pressure by holding the top handle and turning it, allowing you to easily and flexibly control the pressure during operation, greatly reducing the risk of accidentally crushing the watch glass.
  • 【High Quality】: The watch press tool is made of all metal, the mold is ABS plastic, the net weight of a single watch press tool is 350 grams, it is sturdy and durable.
  • 【Wide Range of Adaptations】: This watch press set comes with 12 dies, including 10 double-sided dies and 2 special dies. Suitable for most sizes of the press-fit watch repair and battery replacement use.
  • Equipped with a cleaning cloth, put it between the watch glass surface and the mold before pressing to avoid scratching the glass.
  • 【Simple Operation】: 1. Select the appropriate size mold (please check the details page below for the specific selection method). 2. Place the mold and the watch in order, adjust the upper and lower balance, and ensure that there is no offset. 3. Slowly turn the rotary handle of the watch press tool and press the back cover of the watch.
Check Stock

Cuttlebug Cutting Plate B 6'X13'-

  • Can be used on an embossing cutting machine, the transparent durable cutting pad makes it easy to place materials for precise die-cutting..
  • Ensure both sides of the cutting pads are used, to help extend the life of your pads!.
  • The see-through PC plastic allows easy placement of materials for a precise die cut..
  • Allows complex graphics and complex patterns for die-cutting, suitable for small die-cutting machine, they are not suitable for large injection machine..
  • The clear acrylic die cutting plate is made of quality acrylic board, which is very suitable for your cutting and diy use, and it is very practical..
Check Stock

QWORK NPT Die Set, 6Pcs PVC Thread Maker Tool,Pipe Round Die Set, Pipe Threader Plumbing Tool, Three Maker Size: 1/2

  • Durable: Made of plastic and alloy, sturdy and durable..
  • Thread Mold Size: 1/2 inch, 3/4 inch, 1 inch.
  • Easy to Use: PVC plastic pipe die set, easy to install and use..
  • Package Content: Includes 3 x Thread Mold, 1 x Plastic Pipe Die, and 2 x Round Die..
Check Stock

Ice Cube Tray Easy Release,100 Pcs Ice Molds,2400 Ice Cubes,Food-Grade PE Material,Efficient Filling And Space-Saving,No Peculiar Smell Ice Mold

  • ★【FOOD-GRADE SAFETY MATERIAL】:Made from food-grade PE material, it is safe and odor-free. Each tray makes 24 ice cubes , this package can make 2400 ice cubes in total,make it ideal for cooling whiskey, tequila or other mixed drinks. Great for home use, parties and bars..
  • ★【EASY TO RELEASE ICE】:Each ice cube is separated by the ice mold, and the bag can be torn open for easy removal of the ice..
  • ★【EFFICIENT FILLING】:Place the funnel on the water injection hole, add water to the funnel, and place it in the freezer to get ice. Easy to operate and easy to use..
  • ★【LITTLE SPACE OCCUPATION】:These ice molds are easy to stack， they can neatly stacked in the refrigerator without sticking ..
  • ★【CREATIVE DESIGN】:disposable ice mold, creative self-styled design, no water leakage. The humanized water injection hole is convenient for water injection and convenient to use. Healthy PE resin material, no deformation, safe and environmentally friendly..
Check Stock

We-buys Cutting Dies C Plate Replacement Adapter Mat Clear 5.9'×7.6'

  • Can be used on an embossing cutting machine, the transparent durable cutting pad makes it easy to place materials for precise die-cutting.Plate thickness is 3mm.
  • Ensure both sides of the cutting pads are used, to help extend the life of your pads!.
  • The see-through PC plastic allows easy placement of materials for a precise die cut..
  • Allows complex graphics and complex patterns for die-cutting, suitable for small die-cutting machine, they are not suitable for large injection machine..
  • The clear acrylic die cutting plate is made of quality acrylic board, which is very suitable for your cutting and diy use, and it is very practical..
Check Stock

Soft Plastiс Molds Lure Making Injection Molds Fishing Lure Molds Smallie Beaver 3.5'' Aluminium

  • Smart air vents design to release air and make sure that soft plastic fills all details of the lure moIds.
Check Stock

GEARWRENCH 114 Pc SAE/Metric Ratcheting Tap and Die Set - 82812

  • Ratcheting T handles wind Dies with a 5° swing arc and have a reversing lever to eliminate hand over hand turning.
  • Twist lock guide system reduces the “walk back” of the die guide and keeps the dies centered while cutting.
  • Ratcheting t wrench works with GEARWRENCH pass thru socket system.
  • Die adapters work with the 3/8inch Drive pass thru ratchet and socket system as well as socket accessories.
  • Auto locking feature allow the tap adapters to be removed safely Blow mold carrying case with tilted tap holders for easy access and storage Set includes 2 ratcheting T handles, 3 sizes of tap adapters and 2 sizes of die adapter, 2 extension adapters and a sliding T for the adapters, a 4mm hex key, 5 screw extractors, SAE and metric thread gauges, and 48 taps and dies in SAE and metric sizes ranging from 4 40 to 3/4” and 3mm to 18mm.
Check Stock

Watch Press Tool, TOPWAY Watch Back Press is Suitable for Watches(18-50mm). Watch Case Press (with 12 dies) for Closing Watch Back Cover and Watch Opener Knives for Watch Battery Replacement Tool Kit

  • ...only takes 3 steps to close the watch back cover - Firstly, select 2 suitable dies and screw them on the watch press machine. Secondly, put the cleaning cloth on the lower die and the watch on the cleaning cloth. Thirdly, press the press tool at this time to complete the operation. It should be noted that the lower mold need to be larger than the watch glass, and the upper mold need to be smaller than the watch back cover ..
  • 【Well-made】This watch case press manchine is made of high-hardness aluminum, equipped with a thickened spring.It is easy to exert force with lever principle design. 12 dies are made of ABS material which is smooth to avoid damage to the watch. The replaceable die has metal screws in the middle to avoid wear and tear from repeated use..
  • 【Rational Choice】Every watch lover needs to have this watch press kit. It is an ideal tool for repairing your watch, which can save you time to go to a watch repair shop. This watch press set is also a nice valentines day gifts. We provide 24-hour response to emails and 90-day free returns. If you have any questions after receiving the product, please feel free to contact us. Looking forward to your better....
Check Stock

Astany Snap-on Tools Black Flag Banner 3X5ft

  • Ratcheting T handles wind Dies with a 5° swing arc and have a reversing lever to eliminate hand over hand turning.
  • Twist lock guide system reduces the “walk back” of the die guide and keeps the dies centered while cutting.
  • Ratcheting t wrench works with GEARWRENCH pass thru socket system.
  • Die adapters work with the 3/8inch Drive pass thru ratchet and socket system as well as socket accessories.
  • Auto locking feature allow the tap adapters to be removed safely Blow mold carrying case with tilted tap holders for easy access and storage Set....
Check Stock

2xhome Set of 4 Stackable Mid Century Modern Clear Ghost Side Chairs Dining Room Victoria Transparent Crystal Polycarbonate Plastic Acrylic No Arms Molded Accent Living Desk Office Guest Small Space

  • Due to the glossy finish the clear chair, you will notice some swirls. Single injection molding will have molding line and injection point at some....
  • Set of 4 Victoria ghost chairs - Single mold injection.
  • Made from Polycarbonate (stronger than acrylic).
  • Arrives fully assembled, Stackable and UV Protected.
  • Ideal for indoor or outdoor, home and office use - Living Rooms, Dining Rooms, Bedrooms, Nurseries, Waiting Areas, Parties, Banquets, Wedding party,....
Check Stock

Cycra Powerflow Plastic Kit (Black) for 19-22 Yamaha YZ250F

  • 1.[Fit for] SUZUKI 2006 2007 GSXR 600/750.
  • 2.[Complete Pieces Included] Front nose+ both sides fairings+ front fender+ half tank cover+ tail fairing+ rear seat cowl+ unpainted black inner pieces.
  •  Holes and tabs are built into the mold and align to Factory Settings.
  •  Fairing will be as the pictures show, and may NOT match the color of OEM or your original parts..
  • 5.[Attention]Instructions are Not Included.Highly Suggest Fairing be Installed by Professionals..
Check Stock

best_nj Premium Soft Plastiс Mold Lure Making Injection Molds Fishing Lures Two Cavity Yama Senko 5'' Aluminium

  • INJECTION: Standart 5/8". This size unsures compatibility with most injectors..
  • SMART AIR VENTS design to release air and make sure that soft plastic fills all details of the mold..
Check Stock