Top Injection Molding Core

uxcell knurled Insert Nuts - 25Pcs 1/4\-20 Female Thread Brass Threaded Insert Embedment Nut for 3D Printer

  • [Thread Size] - Thread Diameter: 1/4"-20.
  • [Material] - Made of brass material, high hardness and durable. Provides good mechanical properties with increased corrosion and heat resistance.
  • [Feature] - It can be installed into a plastic matrix by ultrasound or heat during the injection molding process..
  • [Easy to Install] - The knurled insert nut has a guide, so no countersink is required. The surface is smooth, firm and even, and easy to install..
  • [Application] - Can be widely used in 3D printing injection molding to achieve tight fixation..
Check Stock

GlideRite Hardware GR-4340-192-MB-25 7-5/8 Inch Center to Center Barrel Ring Bar Pull Solid Cabinet Hardware Handle 25 Pack

  • Brass nut inner core has clear lines, uniform and deep tooth pitch, good fastening effect.
  • With engineering plastic handle, the surface is smooth and easy to save effort, beautiful and practical.
  • The arc design at the bottom of the handle is neat and tidy, and it will not hurt your hands easily during operation..
  • Using injection molding technology, smooth surface, anti‑corrosion and wear‑resistant, durable.
  • Including 10pcs nuts knob grips, enough and convenient to replace the old or damaged one.
Check Stock

2xhome - Set of 4 Clear Dining Room Ghost Chairs Large Size Polycarbonate Plastic Modern Accent Side Chairs, Clear

  • Made from Durable UV Resistant Polycarbonate (Not Stackable).
  • Minimal Assembly Required, Chair Back Screws To Seat with 2 Hex Screws (included).
  • Ideal for Indoor or Outdoor Use - Home, Office, Parties, Banquets, Weddings, and Matching with Your Dining Table.
  • Single injection molding will have molding line and injection point at some spots. Due to the glossy finish of the clear chair, you may notice some swirls. Slight blue/purple hue may appear on the chair but will fade out over time..
Check Stock

Dental Endodontic Obturation Endo System Gutta-percha Obturation Gun&Pen (White)

  • ★ Dental Flexible Denture Machine Is a 400w/110v Dental Laboratory Equipment for Making Flexible Removable Partial Dentures. ..
  • ★ The Denture Produced by the Invisible Denture Injection Molding Machine Has Almost No Waste Edge, and the Grinding Process Can Be Completed at One Time..
  • ★ The Denture Injection System Is Easy to Operate, Has a Long Service Life, Low Maintenance Cost, High Success Rate, and Dental Laboratory Equipment for Denture Injection System, Which Is Very Necessary for Dentists..
  • ★ The Operation Is Simple, Time-saving, the Casting Success Rate Is High, and the Common Tooth Box Can Also Be Injection Molded..
  • ★ The Denture Injection Unit Consists of a Heater and a Hot Press. Heaters: Temperature Control, Timers and Electrical Systems. Hot Presses: Frames, Cylinders, Heaters, Brackets and Flasks..
Check Stock

2xhome Set of 2 Clear Modern Contemporary Ghost Dining Chairs with Arms Molded Acrylic Plastic Accent Armchairs for Desk Bedroom Outdoor Vanity

  • Set of 2 Louis Style Ghost Armchairs - High Quality Dining Room Accent Chairs.
  • Made from heavy-duty molded contemporary polycarbonate plastic.
  • Suitable for both indoor & outdoor use - Stackable chair for easy storage.
  • Comfortable Chair - Great for both Home & Office use - Dining Rooms, Living Rooms, Family Rooms, Bedrooms, Offices, Waiting Areas, Parties, Banquets,....
  • Due to the glossy finish on the clear chair, you may notice some swirls. Single injection molding will have molding line and injection point at some....
Check Stock

Teenage Mutant Ninja Turtles iPhone 11 Durable Shockproof Cover Case with Hard PC Shield Soft TPU Bumper

  • Selected Imported Environmentally Friendly PC Materials..
  • The Super Shield Is Full Of Hardness And Can Effectively Protect The Body Of The Mobile Phone From Scratches And Injuries..
  • Dust-Proof On The Surface Anti-Stain Fingerprint Design It Is Not Easy To Dust And Easy To Clean..
  • Easy Access To All Features And Buttons And Easy To Install And Take Off.Slides Easily Into/Out Of Pocket..
  • High Temperature Molding By High Precision Injection Molding Machine.The Material Conforms To European Environmental Standards And Uses The Latest Dust-Free Fuel Injection Technology On Both Sides To Make The Shield Feel Full And Elegant..
Check Stock

Green Black Complete Fairing Cowl Kit Injection for 2013-2017 Kawasaki Ninja 300 2014 EX300R EX-300R

  • Condition: 100% Brand new Material: ABS Plastic (Made by injection molding.
  • Color: Gloss Black & Green (our main gallery is for references only.
  • please check our disassemble picture for actual item). High quality paint job, Custom Painted with 2-3 Clear costing.
  • Injection molding: correct tabs and pre-drilled hoes, Precision fitment like OEM Strong, durable and flexible ABS plastic..
  • Free free to contact us for custom painting or order individual piece. Quantity: This is a 17 pieces complete set as a picture showed. (Comes with a free smoke windscreen and heat shield as a gift.).
  • Fitment: 2013-2017 Kawasaki Ninja 300 EX300R EX-300R.
Check Stock

2xhome Set of 2 30” Seat Height Modern Contemporary Bar Stool with Oval Back Armless Polycarbonate Transparent Clear

  • Two Clear Ghost Bar Stools 30" Seat Height (Not Stackable).
  • Made from Crystal Clear transparent polycarbonate (stronger than acrylic).
  • Some assembly required, Chair back screws to seat with 2 hex screws (included), UV Protected.
  • Ideal for Indoor or Outdoor, Home and Restaurant - Living Rooms, Dining Rooms, Bars, Kitchens, Parties, Banquets, Wedding Party, and much more!.
  • Due to the glossy finish of the chair, you will notice some swirls. Single injection molding will have molding line and injection point at some spots. They are not defected. Also blue/purple hue appears on the chair but will fade out over time..
Check Stock

MYLBOO Compatible with Huawei MediaPad M3 Lite 8.0 Case - MediaPad M3 Lite 8.0 Slim Folding Cover/MediaPad M3 Lite 8.0-inch Tablet (Red)

  • Selection of imported environmental protection PC material, through high temperature molding high precision injection molding machine..
  • The material in line with European environmental standards, both sides using the new clean scrub UV fuel injection technology, make the shield feel full, the appearance of high-grade generous..
  • hardness is full, can effectively protect the body of the mobile phone does not scratch bruise..
  • Surface dust nonstick fingerprint design not easily soiled dust easy to clean..
Check Stock

Through‑Hole Knob Clamping Handle, Knob Clamping Handle Wear‑Resistant Clamping Handle Nut Nuts Knob Grip for Clamping Knobs(M832 (no Through Hole))

  • Including 10pcs nuts knob grips, enough and convenient to replace the old or damaged one.
  • The arc design at the bottom of the handle is neat and tidy, and it will not hurt your hands easily during operation..
  • With engineering plastic handle, the surface is smooth and easy to save effort, beautiful and practical.
  • Brass nut inner core has clear lines, uniform and deep tooth pitch, good fastening effect.
  • Using injection molding technology, smooth surface, anti‑corrosion and wear‑resistant, durable.
Check Stock

SEWACC 10pcs Cabinet Pulls Rings Antique Wardrobe Knobs Drawer Pulls Drop Ring Knobs Cabinet Handle Furniture Pulls for Dresser Drawer Cupboard Closet Bronze

  • Including 10pcs nuts knob grips, enough and convenient to replace the old or damaged one.
  • The arc design at the bottom of the handle is neat and tidy, and it will not hurt your hands easily during operation..
  • Using injection molding technology, smooth surface, anti‑corrosion and wear‑resistant, durable.
  • Brass nut inner core has clear lines, uniform and deep tooth pitch, good fastening effect.
  • With engineering plastic handle, the surface is smooth and easy to save effort, beautiful and practical.
Check Stock

Nuts Knob Grip, Knob Clamping Handle Through‑Hole Knob Clamping Handle Clamping Handle Nut Anti‑Corrosion for Clamping Knobs(M832 (no Through Hole))

  • The arc design at the bottom of the handle is neat and tidy, and it will not hurt your hands easily during operation..
  • Including 10pcs nuts knob grips, enough and convenient to replace the old or damaged one.
  • Brass nut inner core has clear lines, uniform and deep tooth pitch, good fastening effect.
  • Using injection molding technology, smooth surface, anti‑corrosion and wear‑resistant, durable.
  • With engineering plastic handle, the surface is smooth and easy to save effort, beautiful and practical.
Check Stock