Top Injection Molding Machinery

1M Drag Chain Cable Carrier R18 10x10mm(Inn HxW) Plastic Black Towline Wire Cable Chain Carrier for CNC Router Mill and 3D Printer,with Extra Connector,Screwdriver,Screws, Bridge Type(10x10）

  • 【Specification】Internal: 10 x 10mm/0.39 x 0.39inch(H*W).
  • External: 13.5 x 17.2mm/(0.53 x 0.68inch)；Total Length : 1M/39.4inch.
  • 【Extra】Extra one pair connector, can split the integral drag chain into 2 pieces to use.
  • Extra 8pcs screws, easy to fix the chain.
  • Extra Screwdriver, freely disassemble to change the length of the chain..
  • 【Multi-Applications】The black plastic drag chain cable carrier is suitable for the occasions of reciprocating motion, tow and protect the built-in electric cable, oil pipes, gas pipes, water pipes. It has been widely used for CNC machine tools, electronic equipment, stone machinery, glass machinery, doors and windows machinery, Injection molding machine, manipulator, lifting and transportation equipment, Automated warehouses etc..
  • 【Flexible】Every segment can be removed and it could be combined with another length to make one long piece..
  • 【Performance】 Low noise, wear resistance, high-speed movement..
Check Stock

LMioEtool R28/38 15mm x 15mm(Inner H x Inner W) Black Plastic Cable Wire Carrier Drag Chain 1M Length for CNC, with End Connectors - Semi Enclosed Type (Inner Side openable)

  • Type: Semi Enclosed Type (Inner side openable).
  • Internal Size: 15mm x 15mm (Inner H x Inner W).
  • Change Size: You could link the cables with each other to form one long length you need..
  • The drag chain has been widely used in CNC machine tools, electronic equipment, glass machinery, doors and windows machinery, injection molding machines, robots, automated warehouses and so on..
  • NOTE: When the moving terminal is bent as "U" shape, the longer part will lay flat but the whole chain can not completely lay flat due to prestress..
Check Stock

LMioEtool R28/38 15mm x 20mm(Inner H x Inner W) Black Plastic Cable Wire Carrier Drag Chain 1M Length for CNC, with End Connectors - Semi Enclosed Type (Inner Side openable)

  • Type: Semi Enclosed Type (Inner side openable).
  • Internal Size: 15mm x 20mm (Inner H x Inner W).
  • Change Size: You could link the cables with each other to form one long length you need..
  • The drag chain has been widely used in CNC machine tools, electronic equipment, glass machinery, doors and windows machinery, injection molding machines, robots, automated warehouses and so on..
  • NOTE: When the moving terminal is bent as "U" shape, the longer part will lay flat but the whole chain can not completely lay flat due to prestress..
Check Stock

Seymour STR-662 1\ STA-LOK Repair Kit

  • Easy to use,convenient to operate,saves effort and time in use..
  • Using thread insert to convert mm---inch screw hole, it is convenient and fast..
  • The steel wire screw sleeve is assembled in the screw hole of aluminum alloy and other materials, which can form standard internal thread with high strength, wear resistance and high accuracy..
  • When there is thread machining error or repair of damaged internal thread hole, using steel wire screw sleeve as repair means, it can be used to repair the thread hole economically and effectively.You can also use the same screw after repair..
  • Typical applications: high-voltage switchgear, microwave communication, auto parts, air separation equipment, radiator, etc.
  • Parts thread hole repair, such as injection molding machine template thread hole repair.
  • Imported equipment or machinery thread dam.
Check Stock

Gusset Commer Grade .25x1.25x8

  • The bracket holder is injection molded hard plastic with countersunk screw hole for firm installation.
  • Unique three-connect stent fixed design, can fix three electric machinery once, placed beautiful.
  • Easy to fix electric machinery / tools and on the table and wall, clean and tidy.
  • Suitable for the fixing of for 14.4V/18V/60V electric machinery at the same time, perfectly match.
  • Adopt good‑quality ABS material, possess impact resistance, scratch resistance, environmental protection.
Check Stock

39.3 inch Carrier Drag Chain Cable Wire R18 10x20mm (Inn H x W) Plastic Black Open Type for CNC Router Mill and 3D Printer,Wire Carrier Cable with 1 Pair Connectors,1pc Screwdriver,12 Screws

  • 【Extra】 Extra one pair connector, can split the integral drag chain into 2 pieces to use.
  • Extra 12pcs screws, easy to fix the chain.
  • Extra Screwdriver, freely disassemble to change the length of the chain and open the side cover of it..
  • 【Multi-Applications】The black plastic drag chain cable carrier is suitable for the occasions of reciprocating motion, tow and protect the built-in electric cable, oil pipes, gas pipes, water pipes. It has been widely used for CNC machine tools, electronic equipment, stone machinery, glass machinery, doors and windows machinery, Injection molding machine, manipulator, lifting and transportation equipment, Automated warehouses etc..
  • 【Flexible】 Each section of the drag chain can be opened for easy installation and maintenance. You can also freely assemble the length as you needed..
  • 【Performance】 Low noise, wear resistance, high-speed movement..
  • 【Specification】Internal: 10 x 20mm/0.39inch x 0.79inch(H*W).
  • External: 15 x 28mm/0.59inch x 1.1inch(H*W)；Total Length : 1Meter/39.4inch.
Check Stock

J.W. Winco 319.5-25-1/4X20-A GN319.5 Plastic Revolving Ball Knob

  • 【Feature】-The Ball knob Injection molding,Bakelite material, feels good.
  • Tightly molded-in insert insures optimal durability and functionality.
  • The round smooth surface gives a dressed-up finished appearance. Ideal lever knob for machine handles.
  • 【Hight Quality】-The handle is made with premium quality and has excellent electrical insulation,oil resistance,weak acid resistance,alkali resistance and general solvent resistance,and has excellent mechanical properties such as toughness,rigidity,good rigidity and balance.
  • 【Easy operation】-This Bakelite hand Knob is easy to install and remove and does not require any tools.
  • 【Application】-Ultra-solid ball knob with a Shiny finish, suitable for general application,such as control levers and push-pull rods,lawn mowers,exercise equipment,machinery,valves,spigots,etc.
Check Stock

Thread Repair Tool Stainless Steel 20Pcs Rethreading Tap Set for Female Thread Repairing Insert Sleeve

  • The steel wire screw sleeve is assembled in the screw hole of aluminum alloy and other materials, which can form standard internal thread with high strength, wear resistance and high accuracy..
  • When there is thread machining error or repair of damaged internal thread hole, using steel wire screw sleeve as repair means, it can be used to repair the thread hole economically and effectively.You can also use the same screw after repair..
  • Using thread insert to convert mm---inch screw hole, it is convenient and fast..
  • Typical applications: high-voltage switchgear, microwave communication, auto parts, air separation equipment, radiators, etc.
  • Parts thread hole repair, such as injection molding machine template thread hole repair.
  • Imported equipment or machinery thread dam.
  • Easy to use,convenient to operate,saves effort and time in use..
Check Stock

1 1/2 Dia, 1/4-20 thds Tapped, Black Phenolic Plastic Ball Knob - Inch (1 Each)

  • 【Feature】-The Ball knob Injection molding,Bakelite material, feels good.
  • Tightly molded-in insert insures optimal durability and functionality.
  • The round smooth surface gives a dressed-up finished appearance. Ideal lever knob for machine handles.
  • 【Hight Quality】-The handle is made with premium quality and has excellent electrical insulation,oil resistance,weak acid resistance,alkali resistance and general solvent resistance,and has excellent mechanical properties such as toughness,rigidity,good rigidity and balance.
  • 【Easy operation】-This Bakelite hand Knob is easy to install and remove and does not require any tools.
  • 【Application】-Ultra-solid ball knob with a Shiny finish, suitable for general application,such as control levers and push-pull rods,lawn mowers,exercise equipment,machinery,valves,spigots,etc.
Check Stock

Othmro 6pcs Thermoset Ball Knob M12 Female Thread Machine Handle 40mm Diameter Smooth Rim

  • 【Feature】-The Ball knob Injection molding,Bakelite material, feels good.
  • Tightly molded-in insert insures optimal durability and functionality.
  • The round smooth surface gives a dressed-up finished appearance. Ideal lever knob for machine handles.
  • 【Hight Quality】-The handle is made with premium quality and has excellent electrical insulation,oil resistance,weak acid resistance,alkali resistance and general solvent resistance,and has excellent mechanical properties such as toughness,rigidity,good rigidity and balance.
  • 【Easy operation】-This Bakelite hand Knob is easy to install and remove and does not require any tools.
  • 【Application】-Ultra-solid ball knob with a Shiny finish, suitable for general application,such as control levers and push-pull rods,lawn mowers,exercise equipment,machinery,valves,spigots,etc.
Check Stock

uxcell 4Pcs Thermoset Ball Knob M5 Female Threaded Machine Handle 16mm Diameter Smooth Rim Black

  • 【Feature】-The Ball knob Injection molding,Bakelite material, feels good.
  • Tightly molded-in insert insures optimal durability and functionality.
  • The round smooth surface gives a dressed-up finished appearance. Ideal lever knob for machine handles.
  • 【Hight Quality】-The handle is made with premium quality and has excellent electrical insulation,oil resistance,weak acid resistance,alkali resistance and general solvent resistance,and has excellent mechanical properties such as toughness,rigidity,good rigidity and balance.
  • 【Easy operation】-This Bakelite hand Knob is easy to install and remove and does not require any tools.
  • 【Application】-Ultra-solid ball knob with a Shiny finish, suitable for general application,such as control levers and push-pull rods,lawn mowers,exercise equipment,machinery,valves,spigots,etc.
Check Stock

Yinpecly 30mm OD 15mm ID 40mm Long Spiral Stamping Light Load Compression Mould Die Spring, for Mechanical Equipment 3D Printer Accessories Yellow Tone 2pcs

  • 【SIZE】- Hole Diameter (Outer Diameter): 30mm/1.18".
  • Inner Diameter (Tolerance +1mm/-0.5mm): 15mm/0.59".
  • 【MATERIAL】- The Compression mould die spring is made of spring steel, and the surface is painted, so there is more durable and can be reused many times.
  • 【FEATURE】- Mold springs adopt closed design, rectangular cross-section, and harder than ordinary springs.
  • They have the characteristics of small size and high precision.
  • 【APPLICATION】- Mold springs are mainly used in the mold machinery of injection molding machines, such as 3D printer heated bed, which are very suitable for high-stress applications, as well as various springs and other applications.
  • 【PACKAGE CONTENT】- Package Content: 2pcs x Compression Mould Die Spring.
Check Stock