Top Injection Screw

Autolite 1100 1 Barrel Carburetor Fits 1963 to 1968 Mustang Falcon Comet straight six cylinder 170 & 200 CID engines hot air choke works with automatic and manual transmissions

  • ...ixing screw.Carburetor Be applicable to 1964-1968 ford 170/200 straight 6 cyl engines.
  • This carburetor is simple in structure and easy to install.After installing the carburetor, if the fuel mixture is too rich and the exhaust pipe emits black smoke, it is necessary to adjust the idle mixing screw to reduce the fuel injection..
  • Before purchase, please check carefully whether the carburetor you need to replace is the same as this product. If necessary, please ask us or local professional auto repair personnel.This product does not include air filters and copper fittings.Fuel Filter 1/8"-27 NPT This size fits our carburetor.
  • We use an improved high-quality needle valve to improve the performance of the carburetor.Mounting aperture 10.5mm 2 hole spacing 68mm,Please contact us for some questions about the installation and use of the carburetor, because the installation of the carburetor requires you to have experience.
Check Stock

Keadic 120 Pcs M4x8mmx6mm Thread Brass Knurled Nuts Set, Female Threaded Insert Embedment Nuts, Threaded Knurled Heat Set for Printing 3D Printer and More Projects

  • ...as high-precision and deep thread that is compatible with the corresponding screw, avoiding to slip. Smooth surface without any burr, standard circular, firm and uniform, easy to install..
  • 【Easy to Use】These threaded insert nuts can be installed by ultrasonic or heat into thread tapered hole, or molded in during injection. Since the insert has a guide, there is no need for a counterbore or countersink..
  • 【Practical Fastener& Wide Application】Perfect for the injection moulding for tightly fixing, heat into thread tapered hole and ultrasonic installation.
  • Widely applied in laptop plastic housings, 3D printers, automotive,electrical injection molding, and all kinds of plastic casings..
Check Stock

uxcell 10x50mm Plastic Expansion Tube Bolts Column Frame Fixings Gray 24pcs

  • Fit for Screw Dia.(Approx.): 8mm / 0.31".
  • Package Content: 24pcs(+/-2%) x Plastic Expansion Tubes(Screws are not included).
  • Material - Made of plastic, injection , flexible, good toughness, impact resistance, not easy to break, high expansion coefficient..
  • Design - Good elasticity and high tension. The protruding edge can prevent the expansion screw from entering the deep part of the hole due to over-deep making..
  • Advantage - Good anchoring force, large anchorage range, can be used to fix brackets, handrails, shelves, frames, cabinets, mirror frames, coat and hat frames, skirting boards, curtain guide rail, and home decoration etc..
  • Application - Can be commonly applied to solid brick, concrete, aerated concrete, high-hole brick, gypsum board, sand brick and other wall materials..
Check Stock

Rockford Fosgate P1683 Punch 6\x8\ 3-Way Full Range Speaker (Pair)

  • The Punch P1683 is an impressive 3-way full-range speaker designed for fanatics who need a high quality factory replacement in an easy to install package.
  • The P1683 6”x8” 4-Ohm black speakers come as a pair, have a power handling of 65 Watts RMS/130 Watts Max and include mounting hardware and OEM adapter plate.
  • Featuring a PEI dome tweeter with built-in crossover and injection molded mineral filled polypropylene cone with butyl rubber surround that provides high output and accurate frequency reproduction.
  • FlexFit basket design utilizes slots instead of single screw sized holes that allow for a slight adjustment of the speaker when aligning with OEM mounting holes for a better fit.
  • Famous Rockford Fosgate build quality with a full 1-year warranty when purchased from an authorized Rockford Fosgate reseller.
  • 6-by-8-inch three-way speaker with 130 watts maximum power handling (65 watts RMS).
  • Mineral-filled & polypropylene injection molded cone with butyl rubber surround.
  • PEI dome tweeter with built-in crossover.
  • Flex Fit basket allows for variable adjustments to the mounting position.
Check Stock

G5 Outdoors Montec Broadhead (Pack of 3), Pink, 85 Grain

  • The Pink Montec is easy to re-sharpen, and has a large 1" to 1 1/8" cutting diameter. With no components to assemble or replace this is a very simply to use "screw on and shoot" broadhead.
  • Metal Injection Molding, creating a tough 1-piece 100% steel construction broadhead.
  • This listing is for a pack of 3 Broadheads.
Check Stock

Rockford Fosgate P16 Punch 6.0 2-Way Coaxial Full-Range Speakers - Black Pair

  • The Punch P16 is an impressive 2-way full-range speaker designed for fanatics who need a high quality factory replacement in an easy to install package.
  • Featuring a PEI dome tweeter with built-in crossover and injection molded mineral filled polypropylene cone with butyl rubber surround that provides high output and accurate frequency reproduction.
  • FlexFit basket design utilizes slots instead of single screw sized holes that allow for a slight adjustment of the speaker when aligning with OEM mounting holes for a better fit.
  • Famous Rockford Fosgate build quality with a full 1-year warranty when purchased from an authorized Rockford Fosgate reseller.
Check Stock

BLACKHAWK SERPA® Level 3 Light Bearing Duty Holster with Matte Finish Size 13 Black

  • Serpa auto lock release and passive Retention detent adjustment screw.
  • Thumb-activated pivot guard for additional security and full-length holster body protects rear sights.
  • Jacket slot duty belt loop and fits all Blackhawk injection molded platforms.
Check Stock

BLACKHAWK SERPA Level 3 Light Bearing Duty Holster with Plain Finish Size 04 Black

  • Serpa auto lock release and passive Retention detent adjustment screw.
  • Thumb-activated pivot guard for additional security and full-length holster body protects rear sights.
  • Jacket slot duty belt loop and fits all Blackhawk injection molded platforms.
Check Stock

uxcell 12x60mm Plastic Expansion Tube for Drywall with Hex Screws Gray 4pcs

  • Carbon Steel Screw Size: 8 x 64mm / 0.31" x 2.52"(Thread Dia*Total Length).
  • Package Content: 4pcs(+/-2%) x Plastic Expansion Tubes.
  • Material - Made of plastic, injection , flexible, good toughness, impact resistance, not easy to break, high expansion coefficient..
  • Design - Good elasticity and high tension. The protruding edge can prevent the expansion screw from entering the deep part of the hole due to over-deep making..
  • Advantage - Good anchoring force, large anchorage range, can be used to fix brackets, handrails, shelves, frames, cabinets, mirror frames, coat and hat frames, skirting boards, curtain guide rail, and home decoration etc..
  • Application - Can be commonly applied to solid brick, concrete, aerated concrete, high-hole brick, gypsum board, sand brick and other wall materials..
Check Stock

Rev-A-Shelf White 32 Polymer Full Circle Lazy Susan w/Bottom Mount

  • Included: (2) Almond Kidney-Shaped Polymer shelves with bottom mount hardware - Independently rotating molded Polymer hardware - Kidney Lazy susans do not attach to any door - Designed for Corner Base Cabinets - Construction: Injection molded polymer plastic designed for durability - Shelf Weight Rating: 20 lbs. per sqft - Simple (4) screw installation.
Check Stock

Tie Down Engineering Dock Hardware - Angle Brackets/Clip

  • The bracket holder is injection molded hard plastic with countersunk screw hole for firm installation.
  • Unique three-connect stent fixed design, can fix three electric machinery once, placed beautiful.
  • Easy to fix electric machinery / tools and on the table and wall, clean and tidy.
  • Suitable for the fixing of for 14.4V/18V/60V electric machinery at the same time, perfectly match.
  • Adopt good‑quality ABS material, possess impact resistance, scratch resistance, environmental protection.
Check Stock

G5 Outdoors Montec 100 Grain 1-1/16\ Cut Broadheads (3 Pack)

  • The blade angle is designed to allow for repeated maximum penetration and devastation..
  • One-Piece Metal Injection Molding Construction, with no parts needed to replace or maintain. This broadhead is easy and simple to use, simply screw on and shoot..
  • Due to the strong tapered blade design's and angle it allows the Montec to be easily re-sharpened..
Check Stock