Top Injector Core Remover Tool

Fuel Injector Removal Puller Kit Injector Seal Install Tool Compatible with Volkswagen TDi 4 Cyl 8V 16V Diesel Replacement for Audi VW 1.2 1.4 1.6 1.8 2.0 2.7 3.0 3.2 3.6 V6 4.2 V8 FSI TSI TFSI Petrol

  • Applicable Engine: Injector removal tool kit compatible with Volkswagen 1.2, 1.4, 1.6, 1.8, 2.0, 2.7 V6, 3.0 V6, 3.2 V6, 3.6 V6, & 4.2 V8 FSI TSI TFSI engine, compatible with Audi VW TDi 4 cyl 8V 16V Engine.
  • Compatible with Diesel and Petrol Engine: Specially designed for removing and installing of high pressure injector and combustion chamber seal, this professional replace fuel injector tool kit compatible with Volkswagen petrol and diesel engine, compatible with Audi, compatible with Seat, compatible with Skoda.
  • Easy Removal Install Fuel Injector: This tool have multiple different size and shap injector puller, they can compatible with Volkswagen different engine, it's easy pull out injector with slide hammer.
  • Replace Injector Seals: This kit include injector oil seal install tool, help you to reseal and reinstall fuel injectors.
  • Combinate Kit: This kit include different diesel petrol injector puller, slide hammer, injector oil seal reinstall tool, injector brush, this case have all the tools for replace fuel injector.
Check Stock

Swpeet 65Pcs Tire Valve Stem Tool Remover & Installation Set, Valve Caps Snap-in Valve Stems with Valve Stem Cores, Single and Dual Head Tire Valve Core Remover Tool, 4-Way Valve Tool for Most Cars

  • 【 What You Get】------ In this kit, You will get 65Pcs Tire Valve Stem Tool Remover & Installation Set. Including 30Pcs valve core(golden, silver).
  • 10 pcs slotted-head valve covers 1 pcs 4-ways valve tool.
  • 1 Pcs Dual Head Valve Core Remover. Suitable for all standard valve cores..
  • 【 Tire Valve Caps and Valve Core Seal Kit】 ----- Universal Tire Stem Valve Caps – These dust covers for wheels help keep tires inflated at the proper level on bikes, cars, SUVs, trucks, and other motor vehicles. Each car tire valve cap also has grips around each dome shape to make it easier to grab and tighten it with your fingers on the fly..
  • 【 Valve Installation and Removal Tool Kit 】------ Dual and Single Head Valve Core Remover: Handy tool designed to remove and install standard valve cores more simple and quick.Made of plastic,and metal, light weight, easily carry.☆4 way valve tool: Multifunction- Great for remove / install valve cores.
  • Re-threading and cleaning inside & outside threads.
  • Remove small stone.Perfect one for removing old leaky or faulty valve stems..
Check Stock

Riseuvo Valve Stem Puller Installer Tool - 10pcs TR412 Tire Snap in Short Rubber Valve Stem, 4 Way Valve Core Remover, Single Head Tire Valve Core Remover Installer Tool

  • All Tool You Need - 1 pcs valve stem puller installer Tool, 10 Pcs TR412 valve stems with 20 pcs valve stem cores, 1 pcs single head valve core tool, 1 pcs double heads valve core remover tool, 1 pcs 4 way valve tool..
  • Valve Stem Puller - For installation or removal of snap in type tubeless tire valves.
  • Rubber Tire Valve Stem - These rubber tire valve stem with bolt-in design, easy and convenient to install and hold the pressure good.
  • 4 Way Tool - Remove your valve core, re-tap threads and ream the inside of the valve (also works on A.C. unit valves).
  • Single or Double Head Tire Valve Core Remover - For quick removal or installation of tire valves. It is often necessary to wring out the valve core when aerated or deflate the tire, then you need the tire valve removal tool.
Check Stock

T6 Valve Core Remover/Installer with Dual Size SAE 1/4 & 5/16 Port Air Conditioning Line Repair Tools for HVAC R32 R410A

  • EASY INSTALLATION:Replace Leaking Valve Cores Quickly and Easily,remove and Install Valve Cores Without the Loss of Refrigerant..
  • WORK WITH:Valve core remover installer changer R22, R410a refrigeration air condition services.
  • CONNECTION:Install tool can adapt to R22/R134/R410/R32 air-condition, external bypass port design can remover valve cores. Works great for both Mini split systems as well as 1/4" service valves on split systems..
  • MAIN FEATURES: Ball value handle, metal schrader cap, schrader’s core grabber tool, built-in magnet at the bottom base..
  • PACKAGE INCLUDES: One 1/4" & 5/16" SAE Valve Core remover and install tool..
Check Stock

TireJect Off-Road 5-in-1 Flat Tire Protection Kit with Sealant Injector 40oz Standard ATV/SxS Kit

  • Applicate 4 x ATV or SxS tires up to 27x9 (10oz per tire).
  • Pre-install in all 4 tires to prevent flats for up to 12 months - Easy to Install with included sealant injector tool.
  • Full Tire Protection and Permanent Seal for tread and sidewall punctures, bead leaks, slow leaks, dry rot.
  • Made in USA - Engineered with liquid rubber, recycled tire particles and Dupont Kevlar fibers (Aramid fibers).
  • Includes - 4 x 10oz pouches of TireJect Tire Sealant, 5oz Tire Sealant Injector for easy install, Metal valve core removal tool, 4 x Red valve stem....
Check Stock

Tire Valve Stem Tool Remover & Installation Set- 10pcs Tire Snap in Short Rubber TR412 Valve Stem with Valve Stem Cores,EASILY REPLACE Your Old Tubeless Valve Stems,Single Head Tire Valve Core Remover

  • 【Package Includes】: 1x Heavy Duty Valve Stem Puller Installer Tool,10x TR412 Valve Stem（Built-in Valve Cores.), 10x Extra Schrader Valve Core,1x Valve Core Remover Tool,2x Valve core remover caps.All the tools needed to complete the job..
  • 【Easy To Install】Pull out the old valve stems and re-install the new valve stems, No need to worry scratching wheels or destroying valve stems..
  • 【Tool Advantages】The tool sets easy to carry and use. Quickly remove or install the the tire valve.pulls out the valve stem with the principle of leverage, which can save your effort effectively..
  • 【Compatible】Suitable for repair of tubeless tires for passenger cars, motorcycles, ATVs, off-road vehicles and trucks..
  • 【Value】Bonus One valve vore remover and Ten valve stem core,Never worry about valve leakage..
Check Stock

kipa Diesel Fuel Injector Cup Sleeve Installation Removal Tool for 6.6L LB7 Chevy Duramax Engines 2001-2004.5

  • Top Quality Well-Manufactured Diesel Fuel Injector Cup Sleeve installation Removal Tool is an engine tool kit made from sturdy, tough prime fibrous Alloy materials that Trucks & Cars enhanced durability and superior reliability. Durable.
  • A must have for any shop working on LB7 Duramax Engines, This Fuel Injector Sleeve Tool helps with the removal and installation of the injector cups without damaging the cup in the process..
  • Fitment: Replace for 2001-2004.5 6.6L LB7 Chevy Engines. All hardware has been coated for rust resistance as well as a rockwell hardness of over 62 to ensure a long life.
  • Replace for OE Part Number J-45910, 7222, ST-193, 2386. KIPA Tool utilize the latest in metallurgical and coating technology it allows us to thread our removal tool into the damaged injector cup without creating any filings or chips to fall into your cylinders. The tool use bridges that are quickly fastened to the injector mounting holes..
  • Our design is engineered towards repeated shop use, and efficiently removing and installing the injector cups . Removing and installing the injector cups should be a surgical operation, not something requiring beating cups in with hammers and leaving brass filings from removing.KIPA designed our tools with tight clearances, a....
Check Stock

WADEO Valve Core Remover Installer Tool with Dual Size SAE 1/4 & 5/16 Port, 20 PCS Valve Cores with Teflon Seal and 10 PCS Brass Nuts, Compatible with R22 R12 R407 R410 R404 R32 R600 A/C

  • Upgrade Environmentally Friendly Valve Cores: The bottom of our valve cores are golden yellow, longer service life than ordinary valve cores, strong resistance to fluorine, stronger heat..
  • Easy to Install: The valve core remover installer tool’s core grabber tool makes it be easily inserted into the inner valve core to control the core. No need to stop the machine, no need to release the refrigerant..
  • Wide Application: Suitable for all refrigeration equipment, dual size( SAE 1/4'' & 5/16'' Port ) design makes the valve core remover installer tool be compatible with R22, R12, R407, R410, R404, R32 A/C air condition system, etc..
  • Great Design: Durable, solid brass tool has a ball valve that can be opened and closed in just a quarter-turn. (No Gas Loss). Anti-slip design increase hand friction, prevent all kinds of overpowered valves.
  • High-quality craftsmanship probes, rugged and durable, suitable for most equipments..
  • Package Included: 1* Valve Core Remover, 1 *R410 R32 Brass Adapter, 20* Valve Cores, 10* brass nuts..
Check Stock

Lawn Mower 5-in-1 Off-Road Tire Sealant - Flat Tire Protection Kit with Sealant Injector - Repair & Prevent Flat Tires

  • Applicate Lawn Mower with rear tires up to 24x12 and Front tires up to 16x7.
  • Includes - 30 oz of TireJect Tire Sealant, Sealant Injector, Valve core removal tool, Red valve stem caps, Protected by TireJect sticker.
  • Pre-install in all 4 tires to prevent flats for up to 24 months - Easy to Install with included sealant injector tool.
  • Full Tire Protection and Permanent Seal for tread and sidewall punctures, bead leaks, slow leaks, dry rot.
  • Made in USA - Engineered with liquid rubber, recycled tire particles and high strength Aramid fibers.
Check Stock

9U-7227 Injector Height Tool + J-38587-A Engine Barring Socket Turning Tool + 9U-6891 Injector Tube Sleeve Cup Removal & installer Tools Set Fits for CAT Caterpillar 3406E C15 C16 Engines 8 PCs

  • 【Great Compatibility】Perfectly fits for CAT Caterpillar 3406E C-15 C-16 engines. These essential handy tools set for service the engines to save....
  • 【J-38587-A Engine Barring Socket Tool】Direct replacement for 6749 ENL80-0054 & 9S9082. Used to manually turn over engine while servicing, was able....
  • 【9U-7227 Diesel Engine Injector Timing Fixture】Used for quickly and correctly adjusting fuel injectors to obtain a dimension of 78.0 ± 0.2 mm....
  • 【9U-6891 Injector Sleeve Remover & installer Tools Set】Designed to remove and install the injector sleeves quickly and easily. Works in an easier....
  • 【100% Satisfaction Guarantee】If you're not satisfied with this kit, simply return it for a full refund in 30 days. While you have any questions....
Check Stock

V-SEK Injector Cup Nozzle Tube Remover and Installer Tool Kit Compatible with Detroit Diesel DD13 DD15 DD16 Replacement for OEM J-47388-A W470589000700 MH064002

  • FITMENT: Compatible with Detroit Diesel / Mercedes Benz Trucks DD13, DD15, and DD16..
  • REPLACeMENT: Alternative to OEM J47388-A and W470589000700 MH064002..
  • QUALITY: High standard heavy duty hard steel with black oxidation treatment, great strength, durable and corrosion resistant, not easy to deform, with long service life..
  • DESIGN: Easy to remove and replace the injector cups/ tube/ nozzle, saving your time. Jaws will hold the cup from the bottom, while the O rings provide assistance on the side as you unscrew the cup from the top..
  • NOTE: Remember to drain the coolant before removing the injector cups. If you have any question about this injector cup nozzle tube remover and installer tool, don't hesitate to contact us. Your satisfaction is our main concern..
Check Stock

R410A R22 Valve Core Remover & Installer with Dual Size SAE 1/4 & 5/16 Port Air Conditioning Line Repair Tools for R404A R407C R134A R32 HVAC System

  • CONNECTION ----- The dual size 1/4" & 5/16" SAE valve core remover and install tool can adapt to R22/R134/R410/R32R air-condition, external bypass port design can remover valve cores. Works great for both Minisplit systems as well as 1/4" service valves on split systems..
  • EASY INSTALLATION ----- The Schrader's core grabber with disconnect valve, the tool can be easily inserted into the inner valve core for removal or installation. Built-in disconnect valve for easy operation, no need to stop the machine, no need to release the refrigerant..
  • PERFECT DESIGN ----- The valve core remover installer tool is made of pure copper.
  • The metal knob is all designed with anti-slip design. Durable, solid brass tool has a ball valve that can be opened and closed in just a quarter-turn, rather than a slower to operate stem-type valve. (No Gas Loss)..
  • GREAT FUNCTION ----- Shut-off Ball value handle, metal schrader cap, schrader's core grabber tool, built-in magnet at the bottom base. Please close the valve and disconnect the air conditioner before removing the valve core..
  • 2-YEAR WARRANTY ----- Order from SURIEEN, we offer 2-YEAR WARRANTY, true worry-free shopping experience. If you are not satisfied with the item please contact us ask for a replacement or refund in limit....
Check Stock