Top Inlet Pipe

Shok Blok SB-FPV-40 Water Filter Pressure Regulator Protection Valve for RO & Filter Systems - 1/4\ QC Ports, 40 PSI

  • GAS TYPE & PRESSURE - Gas Type: Natural Gas (NG). Inlet gas pressure: 1/2 PSI. Outlet pressure range: 3" - 6" Water Column.
  • PIPE THREAD SIZE - 3/4" Inlet & 3/4" Outlet FPT GAS PIPE. Make sure you measure the gas pipe or regulator opening as close to 1-1/16 inch as shown in the picture’s table..
  • CAUTION - This regulator has 1-1/16" openings for 3/4" gas pipes. The 3/4" gas pipe means interior diameter 3/4" but outside diameter is 1-1/16.
Check Stock

Exhaust Tip 3.00' Inlet 4.00' Outlet 16.00' long Dual Slant Angle Stainless Steel WDWD304016-300-SS Wesdon Exhaust Tip

  • Exhaust Tip 3.00″ Inlet 4.00″ Outlet 16.00″ long Dual Slant.
  • Double Wall Slant Could be used as Left or Right Side.
  • Weld On Style fits a 3.00 Exhaust Pipe 3.00 Inlet.
  • (Please measure to make sure it fits your Car or Truck) fits a 3.00 Exhaust Pipe 3.00 Inlet.
Check Stock

Exhaust Tip 2.50' Inlet 4.00' Outlet 16.00' long Dual Slant Angle Stainless Steel WDWD304016-250-SS Wesdon Exhaust Tip

  • Exhaust Tip 2.50″ Inlet 4.00″ Outlet 16.00″ long Dual Slant.
  • Double Wall Slant Could be used as Left or Right Side.
  • Weld On Style fits a 2.50 Exhaust Pipe 2.50 Inlet.
  • (Please measure to make sure it fits your Car or Truck) fits a 2.50 Exhaust Pipe 2.50 Inlet.
Check Stock

VQL Universal Burnt Tip Muffler, 2 inch Inlet Muffler Exhaust, 2Inch Inlet 3Inch Outlet Blue Burnt Exhaust Muffler, Import Muffler Stainless Steel Exhaust Burnt Tip 14.8Inch Length

  • ◆【Widely Use--2 Inch Inlet Muffler】 This is a exhaust muffler, universal fits any 2'' inlet trucks car exhaust tail pipe. muffler suitable for most cars, trucks, cars, etc. with 2-inch air intake and 3-inch air outlet..
  • ◆【Premium Quality - Burnt Muffler】 The import muffler is made of stainless steel and is durable,Straight-through muffler design reduces back pressure while absorbing sound waves, Better air flow design, Improves exhaust velocity performance..
  • ◆【Function and Decorate】 Burnt muffler tailpipe exhaust can not only prevent the deformation of the car exhaust pipe, but also play the role of supercharging and turbulence.The 2'' Inlet 3'' Outlet exhaust muffler is made of high-quality materials helps absorbing sound and producing a low,deep tone.Burnt muffler has a burnt blue tip that adds an aesthetic focal point to the rear of the vehicle, make your vehicle look cooler,Your car will definitely stand out from the crowd..
  • ◆【Size and Material】 2'' inlet, 3'' outlet, 14.8'' length. exhaust tip Pipe built with mirror polished stainless steel & blue plating, blue burnt exhaust tip. Please Measure the size of your Tail Pipe Before purchase..
  • ◆【Lifetime Warranty】 Package Included: 1 x Blue Burnt Exhaust Muffler All our prod....
Check Stock

Watts 2\ Bronze Heavy Duty Float Valve Assembly, 2000

  • Bronze body construction includes machine flange on the inlet side..
  • Features a 2 inch female NPT pipe threaded inlet connection..
  • Features male straight-pipe threaded outlet connection for locknut..
  • Serrated arms for easy adjustment of water level..
  • Includes bronze long and short arms, replaceable seals, and no-jam single level action..
Check Stock

Jinsanity Performance Dual Exhaust Tip 2.5 Inch Inlet 3.5'x2 Outlet 10' Length Stainless Polished.(Double rolled, angle,welding) - 1 pair(Left and Right)

  • Design: Weld On – Rolled Edge – Angle Cut..
  • Wide Application: Fits 2.25″ Inlet diameter car exhaust tail pipe..
  • 2.25″ Inlet 2-1/4 inch exhaust tail pipe rectangle tips for universal use..
  • 1 Year Warranty: No instruction is included. Professional installation is highly recommended..
Check Stock

Exhaust Tip 3.00" Inlet Dual 3.00 X 9.75 Long Round Double Wall Gloss Black 304 Stainless Steel WDWR300975-300-GBK-SS Wesdon Exhaust Tip

  • Exhaust Tip 3.00" Inlet Dual 3.00 X 9.75 Long Round Double Wall.
  • Weld On Style fits a 3.00 Exhaust Pipe 3.00 inlet.
  • 304 Stainless Steel High Gloss Black Powder Coated.
  • This is made to fit a 3.00” exhaust pipe. Please measure your exhaust pipe to make sure you have a 3.00” exhaust pipe outlet and that you have the room for it to fit..
Check Stock

AP Exhaust 301200S Glasspack Muffler

  • Heavy gauge shell for maximum durability.
  • Expandable bushings for custom applications, Available stainless steel or painted.
  • Continuous Roving Fiberglass for powerful tone and long life, Straight through design for maximum flow and power.
  • Muffler Body Height: 3.5", Muffler Body Length: 26", Muffler Body Width: 3.5" , Muffler Body Material - Aluminized, Muffler Inlet Configuration -....
  • Muffler Inlet Connection Type: Pipe Connection, Muffler Inlet Diameter: 2.25", Muffler Inlet Diameter Designation: Inside Diameter , Muffler Overall....
Check Stock

Zurn GT2700-10-2NH - Steel Grease Trap, 10 GPM 2\ with Flow Control

  • ...The lid can be tightly fixed with a screw. The cushion layer is equipped for increasing friction and enhancing airtightness. Besides, a sealing ring and PTFE tape are also included in the package..
  • Ease Of Connecting：You can connect our commercial grease trap to your kitchen sink conveniently. Just link the grease inlet pipe to the higher inlet hole and the water outlet pipe to the lower outlet hole, then it will work properly. A piece of connecting pipe is provided, with which you can place it right below the drainage outlet of the sink. P.S. You need to prepare the grease inlet pipe and water drainage pipe by yourself..
  • Well-designed For Wide Use: This commercial carbon steel interceptor calls attention to the thoughtful details as well, such as the solid outlet valve, a handle on the cover for lifting, and practical sealing ring and PTFE tape. You can apply it to restaurants, fast food chains, public canteens, home kitchens, etc..
Check Stock

Exhaust Turn Down Exhaust Tip 2.00' Diameter X 8.00' Long 1 7/8' Inlet Turn Down Chrome Plated WTD20008-175 Wesdon Exhaust Tip

  • 1 7/8 Inch Inlet 2.00 Inch Dia 8.00 In Long Turn Down Weld On Exhaust Tip.
  • Weld On Style fits a Exhaust Pipe 1 7/8 Inlet.
  • 2.00 Inch Diameter Pipe 8.00 Inches Long.
  • Turn Down Style Tip (Please measure to make sure it fits your Car or Truck) 1 7/8 ID Pipe.
Check Stock

FREESEA Fish Tank Gravel Cleaner: Aquarium Siphon Vacuum Gravel Cleaner with Algae Scraper Water Flow Controller 5 in 1 Quick Water Changer for Fish Tank Gravel Sand Cleaning

  • ...D filter basket net which prevents aquarium gravel from jamming the pipe, not only does it separate and remove debris effectively, it also protects your young fish, grass and gravel from being sucked out..
  • ✅ [Easy to Installation & Use] - Aquarium vacuum gravel cleaner adopts humanized handheld design, connect the inlet and outlet pipe and put water inlet into a fish tank and the outlet into a bucket. Just a few gentle presses, the water will automatically flow out quickly. Allow one-hand operation, let your hands free. Note: The position of water outlet must be lower than the inlet (at least 50cm/16ft)..
  • ✅ [Include Everything You Need] - Fish tank vacuum cleaner includes: 2 x Extension inlet tube, adjustable extra long tube, suitable for all types of fish tanks.
  • 1 x Water flow clamp, easily adjust water flow.
  • 1 x Fixture clamp(Water pipe clamp), freely fix, free your hands..
Check Stock

RV Fresh Water Locking Cap, Water Inlet Leak Proof Motorhome with 2 Keys, Caravan Locking Gravity Filler Cap for Camping Trailer Gravity Motorhome

  • High Quality Food Grade Pp Stabilized Gravity Water Inlet Features A Bayonet Style Cap, 10Mm Air Vent For Faster Fill Rate And A 40Mm Barn Connection..
  • Lockable,comes with 2 pieces keys,ensure using water safely.​Pipe threads are brass,easy to installation.​.
  • ​Pipe threads are brass,easy to installation.​.
  • Package: 1 x Water Inlet 2 x Keys.Outer diameter: about 110 mm.
  • Feature: Gravity water inlet features a bayonet style cap,large diameter for faster fill rate..
Check Stock