Top Inlet Pressure Relief Valve

Clscea Aquarium CO2 Regulator Dual Gauge with Bubble Counter and Solenoid Valve, Single Stage

  • [Hold Constant Pressure & No Leak]Hilangsan two-stage kegerator co2 regulator reduces the high pressure in two steps for maintaining the constant output pressure. Heavy-duty chrome-plated brass construction would last for years with no rust and no leakage. A professional CO2 regulator for draft beer dispenser systems..
  • [Easy-to-Adjust Knob & Safety Relief Valve]Knurled adjustment knobs of the co2 beer regulator are easy to grip and turn for precise fine-tuning CO2 levels from 0-60psi. The shut-off valve can be closed only by turning 90°, no need to turn multiple turns. The pressure relief valve will automatically release the keg pressure at 50psi pressure for safety (not a leak)..
  • [Precise and Clear Gauges]The top two gauges(0-60psi) have an appropriate scale range to allow for precise fine-tuning of keg pressure while avoiding damage to the gauges from overpressure. The left gauge (0-3000psi) is convenient for monitoring the amount of CO2 in the tank at any time. The shockproof case can protect the gauges, making the gauges more durable..
  • [Dual Body CO2 Regulator]The co2 keg regulator has 2 separate output pressur....
Check Stock

mistcooling 250 PSI Misting Pump

  • ...e – Controls flow of water in the pump in built filter – helps protect your misting nozzles built in water by pass self-priming.
  • Nickel-plated brass button series With stainless-steel Orifice Standard 10/24-inch thread 0. 012-inch Orifice Rust-resistant fixed impeller pin 0. 014 GPM Flow per Nozzle.
  • Maximum inlet pressure: 100 psi Minimum inlet pressure: self- priming. Maximum outlet pressure: 250 psi (depends on line length and numbers of nozzles) maximum flow: 0. 9 GPM full load Amps. 110V AC: 0. 7 amps 12V DC: 4. 0 amps Voltage: 110V-220V AC/ 12V DC (refer manufacturing label on the pump) noise level: 40 dB. Maximum fluid temperature: for room temperature/ cold water applications only.
  • Max pressure 250 psi Available in 110 V, 220 V & 12 VDC Durable Rust Proof Enclosure Thermal Safety Switch Oil-less Pumps may generate heat, motor manufacturer have installed built-in thermal safety switch to improve the longevity of pumps Standard pump inlet: 3/8-inch push lock Fitting. Standard Pump outlet: ¼ inch Push-lock fitting. Max pressure 250 psi 110 V AC.
  • 1. Solenoid Valve Solenoid valve controls the flow of the water in to the pump. You may leave the inlet water source on at all the time. Water will enter the pump only when main power switch is turned on....
Check Stock

Kweetle 2Gal Stainless Steel Pump Up Sprayer Reinforced Hose, Hand Pump Sprayer with Pressure Gauge&Safety Valve, Adjustable Nozzle Suitable for Gardening (2 Gallon)

  • 【All Stainless Steel Structure】- Capacity: 2 Gal.
  • Pressure: 1.5-4.0 Bar. The 1.5Gal Stainless Steel Sprayer pump, box, cover, rod, pump handle and rod handle are all made of durable stainless steel. Braided durable hose， high quality – with viton seals and gaskets.
  • 【HAND-PUMPED SPRAYER】- This sprayer boasts large flow piston rod with humanized handle, it is designed for easy use and also for quickly building up air pressure with no need for outlet or extension cord.adjustable spray is perfect for misting.
  • 【WIDE-MOUTH WATER INLET】- This sprayer boasts valve and pressure gauge that can provide convenience and ensure safety.Large Wide Mouth opening allows for easy filling and cleaning and less spilling.
  • 【EQUIPPED WITH PRESSURE RELIEF PROTECTION VALVE】-The bleach sprayer can be in the case of too much air will automatically vent pressure relief, can avoid the risk of pot burst due to the pressure is too large， Built-in fast and accurate pressure gauge, suitable for the actual needs of industry, agriculture, commerce and medicine.
  • 【WIDE APPLICATION】- Our handheld stainless steel sprayer is ideal for gardening, lawn, yard, indoor and outdoor spraying needs, automotive, general cleaning, pet bathing.
Check Stock

Hydraulic Directional Control Valve 5 Spool 13 GPM 3600 PSI SAE Ports 4 Way 3 Positions Double Acting Hydraulic Valve for Tractors Loaders Tanks Loaders Log Splitters

  • SPECIFICATIONS: This log splitter hydraulic flow control valve has a 2-spool, 3-way construction with a processing rate of 18 GPM, ¾” NPT inlet and outlet ports, ½” NPT work ports, and withstands 3625 PSI pressure. It weighs only 5 lb (2.26 kg)..
  • POWER PACKED: With a processing rate of 18 GPM, the hydraulic valve log splitter is way more powerful and efficient than normally available options. This log splitter valve with one spool can split heavy, dense logs in minimal time..
  • HIGH TOLERANCE: This wood splitter valve control with a hydraulic relief valve tolerates pressure up to 3625 PSI. This prevents internal damage to the hydraulic valve handle even when it is being used to exert intense pressure..
  • FAST ACTION: Our wood splitter valve control has a 4 way, 3 position tandem spring center that extends the cylinder’s piston rapidly and helps in high-speed, high precision log splitting. Chief’s hydraulic valve 1 spool is simple and fast..
  • TIME SAVING: Our log splitter valve has an auto return detent lever handle. You can position the next log to be split while the piston repositions itself. The log splitter auto return detent makes log splitting convenient and quick..
Check Stock

Garden Pump Sprayer 1.5 Gallon Stainless Steel Sprayers in Lawn and Garden with Pressure Relief Valve Adjustable Shoulder Strap Backpack Hand Yard Water sprayers for Home, Gardening, Ground Cleaning

  • 【ALL STAINLESS STEEL STRUCTURE】- The pump, box, cover, rod, pump handle and rod handle are all made of SUS 304 stainless steel. This practical water sprayer use thicker stainless steel plate, so this pump pressure sprayer is more durable than other similar products.The stainless steel pump sprayer has braided durable hose, with EPDM and gaskets..
  • 【HAND-PUMPED SPRAYER】- This hand pressure sprayer boasts large flow piston rod with humanized handle, it is designed for easy use and also for quickly building up air pressure with no need for outlet or extension cord.The multi-Purpose yard sprayer is perfect for misting. It has built-in fast and accurate pressure gauge, suitable for the actual needs of industry, agriculture and commerce..
  • 【EQUIPPED WITH PRESSURE RELIEF PROTECTION VALVE】-The bleach sprayer can be in the case of too much air will automatically vent pressure relief, can avoid the risk of pot burst due to the pressure is too large. At the same time, the exhaust valve can also be after the work, pull up the exhaust valve to release the excess pressure in the bucket, can effectively the longer the service life..
  • 【WIDE-MOUTH WATER INLET】- This stainless steel sprayer is very easy to use.Large wide mouth opening allows for easy filling....
Check Stock

Taprite Co2 Primary Beer Regulator 3741-BR New Draft Wine Soda - Dual High Pressure Gauge

  • 1P1P, CGA320 inlet, 5/16″ Barb Shutoff, 60 lb and 2000 lb gauges..
  • Includes a washer and is ready to attach to a CO2 tank..
  • CO2 regulator has 2 gauges, a 1/4 barbed shutoff valve, and pressure relief valve..
  • Primary Beer Regulator for Home Dispense..
Check Stock

The ROP Shop | 2400 PSI Power Pressure Washer Water Pump for Excell & Devilbiss VR2400, VR2500

  • The ROP Shop replacement 2400 PSI Power Pressure Washer Water Pump for Excell & Devilbiss VR2400, VR2500.
  • Specs - Maximum Pressure: 2400 PSI. Maximum Flow: 2.4 GPM. Maximum Pump Speed: 3400 RPM. Shaft Diameter: 7/8". 3 Bolt Pattern: 7 11/16” x 6 3/16” x 6 7/16” & 4" Center to Each Outer Hole. Maximum Water Temperature: 140° F. Inlet Connection Type: Standard Garden Hose. Outlet Tube Connection: 22mm Male. Refer to images 2 and 3 for more information.
  • Includes - (1) Vertical Pressure Washer Pump with Chemical Injector, Unloader Valve, Thermal Release Valve & Outlet Tube (come installed).
  • This pump is for vertical gas engine driven units. In some instances, the pump may need to be removed to change engine oil. The mounting flange provides a convenient connection to most 7/8” diameter shaft vertical gas engines in 4.5-7 HP. The pump has a hole in the leg for draining the engine oil. The pump includes a built-in pressure control valve, downstream chemical injection system and thermal relief valve.
Check Stock

TCP Global 10 Gallon (38 Liters) Pressure Pot Tank for Resin Casting - Heavy Duty Powder Coated Pot with Air Tight Clamp On Lid, Caster Wheels, Regulator, Gauge - Use for Curing Resin in Casting Molds

  • Professional heavy-duty 10 gallons (38 liters) capacity pressure pot tank for resin casting. The tank has a maximum operating pressure of 50 PSI. Holds the air pressure constant at your regulated air pressure setting during the whole casting mold resin curing process..
  • The pressure pot tank is constructed with heavy gauge steel and has a durable easy to clean powder coating. It has a 14.5″ inside diameter and is 17″ deep, so it has a large enough capacity to accommodate almost any casting project. Includes 4 removable caster wheels..
  • Tank has a clamp-on lid with an airtight sealing gasket. The lid has an air pressure regulator with air inlet shut off ball valve, air pressure gauge from 0 to 100 psi, safety air relief valve and an air release outlet cock valve..
  • The ideal pressure pot tank for inserting resin casting molds and holding them under pressure so that you can make high quality virtually bubbleless resin castings..
Check Stock

BETOOLL Nitrogen Regulator with 0-400 PSI Delivery Pressure Equipment Brass Inlet Outlet Connection Gauges

  • CGA580 Inlet Connection, 1/4 Inch Male Flare Outlet Connection and Easy to Read 2 Inch Gauges with Protective Rubber Gauge Boots.
  • Nitrogen Regulator, Delivery Pressure 0-4000 PSI..
  • Durable brass piston designed diaphragm, self re-seating relief valve (not designed to protect downstream system).
  • Large brass Tee Handle with stainless steel pressure adjusting screw and regulator bushing that prevents galling.
Check Stock

Rheem Temperature and Pressure Relief Valve SP8346, Small

  • TeeJet 3/4" Pressure Relief Valve (23120-3/4-PP).
  • 316 stainless steel spring and Viton o-ring.
Check Stock

Reliance 6 6 SOMS K 6 Gallon Compact Electric Water Heater

  • Ideal for under counter or crawl space installation.
  • 6 gallon short, 6 year warranty, electric..
  • Single 120 volt 1650 watt copper heating element..
  • Side mounted cold water inlet and hot water outlet for easy installation..
  • Factory installed Temperature and Pressure, T&P relief valve.
Check Stock

Noritz NC199ODNG Outdoor max 199,900 But 9.8 Gym - NG White

  • Fits all NORITZ models except NC132M/NC380 and NCC300.
  • Fits all other tankless brands with 3/4" inlet and outlet..
Check Stock