Top Inner Shaft

Rochix Flute Cleaner Care Cleaning Kit,Maintenance Kit,Key Oil,Cork Grease,Swab,Cleaning Cloth,Cleaning Brush,Cleaning Rod(Random Color Cloths)

  • Swab:Enter the pipe body through the pendant to clean the moisture in the pipe,the operation is easy and natural(random color cloths).
  • Key oil:Maintain the key levers,the keys will be more flexible while playing. It can effectively reduce the wear between the shaft and the shaft sleeve,increase the service life of the instrument.
  • Cleaning brush:Clean the inner cavity of flute,easy to use,the hair is soft,cleans thoroughly,does not damage the inner cavity.
  • Cleaning rod:The cleaning rod is used with a cleaning cloth,which can effectively clean and wipe the moisture in the inner cavity of flute.
Check Stock

uxcell 12mm Inner Dia H13*D18 Rigid Flange Coupling Motor Guide Shaft Coupler Motor Connector 2PCS for DIY Parts

  • Inner Diameter: 12mm/0.47 inch, Total Height: 13mm/0.51 inch, Cylinder Outer Diameter: 18mm/0.71 inch, Cylinder Height: 10mm/0.39 inch, Base Diameter: 32mm/1.26 inch, Base Height: 3mm/0.12 inch, Mounting Hole Distance: 26mm/1.02 inch,2 x M4 Fastening Screws.
  • Type: Flange Shaft Coupling, suitable for model shaft connection, perfect accessories for RC Model motor, etc..
  • Material: Iron Alloy, hardened by heat treatment, and then electroplated. Durable and insulation, make your shaft more stable, easy to install and replace..
  • Function: A special coupler, which can fix one shaft to a plane and install other parts on the shaft easily. Double connection points fasten the coupler tightly..
  • Package: 2 x 12mm Flange Shaft Coupling, 4 x Fastening Screw( M4 Hex Wrench Not Included Here ).
Check Stock

uxcell 8mm Inner Dia H13*D16 Rigid Flange Coupling Motor Guide Shaft Coupler Motor Connector 2PCS for DIY Parts

  • Inner Diameter: 8mm/0.31 inch, Total Height: 13mm/0.51 inch, Cylinder Outer Diameter: 16mm/0.63 inch, Cylinder Height: 10mm/1.31 inch, Base Diameter: 32mm/1.26 inch, Base Height: 3mm/0.12 inch, Mounting Hole Distance: 24mm/0.94 inch,2 x M4 Fastening Screws.
  • Type: Flange Shaft Coupling, suitable for model shaft connection, perfect accessories for RC Model motor, etc..
  • Material: Aluminum Alloy, hardened by heat treatment, and then electroplated. Durable and insulation, make your shaft more stable, easy to install and replace..
  • Function: A special coupler, which can fix one shaft to a plane and install other parts on the shaft easily. Double connection points fasten the coupler tightly..
  • Package: 2 x 8mm Flange Shaft Coupling, 4 x Fastening Screw( M4 Hex Wrench Not Included Here ).
Check Stock

EMILYPRO Shaft Arbor Extension 1/2  and 5/8 / Motor Arbor Threaded Shaft Adapter for Buffing Grinding Wheels / Fit for Bench Grinder - Right 1 Pack

  • 【Function】This Shaft Arbor Extender is designed to convert 1/2" or 5/8" shaft electric motor to 1/2" threaded shaft buffing machine, or transfer....
  • 【Application】This Electric Motor Arbor Threaded Shaft Adapter suitable for mounting Buffing wheels, Polishing wheels, Grinding Wheels, Wire brush....
  • 【Using Method】To Attach the tube side to your motor arbor or bench grinder shaft, fasten the hidden screw to make it fastness, use the 2pcs....
  • 【Advantage】Making your Motor like a transformer, which is cost saving. just a small Motor arbor shaft extension adapter can create a new grinder....
  • 【Dimension】Tube side OD x ID x L：7/8" x 5/8" x 1-5/8".
Check Stock

Musiclily Pro 6mm Steel Knurled Flat Top Barrel Knobs with Set Screw for Telecaster Electric Guitar or Precision Bass Chrome Set of 2

  • Fits for many electric guitars and basses, including Fender and Squier Strat/Tele/Precision Bass/Jazz Bass and other similar style guitar bass.
  • Compatible with 6mm (15/64 inch) solid shaft, coarse spline and fine spline split shaft potentiometers, good for most imported pots like Alpha and USA made split shaft pots. DO NOT fit for USA standard 1/4 inch (6.35mm) solid shaft pots.
  • Height: 19mm (3/4 inch), outer diameter: 19mm (3/4 inch), inner hole diameter: 6mm (15/64 inch).
  • Made of quality steel, knurled flat top knobs, with set screw to secure the knob to the shaft. You need to tighten the set screw in line with the split when installing this knob on a split shaft pot.
  • Package includes: 2 pieces knobs and screwdriver.
Check Stock

Musiclily Pro 6mm Steel Abalone Top Telecaster Dome Knobs with Set Screw for Tele Electric Guitar or Precision Bass, Chrome (Set of 2)

  • Fits for many electric guitars and basses, including Fender and Squier Strat/Tele/Precision Bass/Jazz Bass and other similar style guitar bass.
  • Compatible with 6mm (15/64 inch) solid shaft, coarse spline and fine spline split shaft potentiometers, good for most imported pots like Alpha and USA made split shaft pots. DO NOT fit for USA standard 1/4 inch (6.35mm) solid shaft pots.
  • Height: 18mm (45/64 inch), outer diameter: 18mm (45/64 inch), inner hole diameter: 6mm (15/64 inch).
  • Real Abalone top will dress up your instruments well.Made of quality steel , with set screw to secure the knob to the shaft.You need to tighten the set screw in line with the split when installing this knob on a split shaft pot.
  • Package includes: 2 pieces knobs and wrench.
Check Stock

10 Pcs Shaft Collar Electroplate Ferronickel Shaft Lock Collar Ring Carbon Steel Hex Fixed Buckle DIY Technology Making Model Toys (5.1mm)

  • EASY TO USE: The shaft collar can be used for blocking position for the shaft and steel wire. When installing the wheel, use the wheel block to lock the inner limit or the periphery of the wheel to lock the steel wire or the landing gear axle. When the wheel is rotated, it does not run off..
  • REUSABLE: The locking shaft collar adopts carbon steel hex fixed buckle, can be used repeatedly without breaking..
  • HIGH EFFICIENCY: Pattern edge of lock shaft collar makes the knob rotation easier, which can improve work efficiency, save time and energy..
  • COMPACT SIZE: The shaft collar assortment adopts appearance plating process, no rust, no scratch, which is compact design for easy portability and storage..
  • PACKAGE: Including 10 pcs shaft collar to meet your quantity needs, very practical in work and life, can bring you more convenience..
Check Stock

2Pairs ShareGoo Front & Rear Steel Drive Shaft Transmission Axle Compatible with Traxxas Slash 4X4 Nitro Rustler VXL Stampede 4X4 1/10 RC Car Truck Silver

  • The front and rear drive shaft compatible with Traxxas Slash 4X4 / Platinum / Ultimate / VXL 4x4 4WD Hoss 4X4 VXL Rustler 4X4 VXL Stampede 4X4 VXL....
  • The slash drive shaft are made of high quality steel material ,the hex wheel hub is made of aluminum alloy,durable in use..
  • Shaft Length Range:110mm-140mm/4.33''-5.51''.
  • Hex Wheel Hub Color:Blue/Silver(Optional).
  • Upgrades parts,designed for lasting performance,improves the overall performance of your rc car..
  • Package includes 2Pcs universal front drive shaft and 2Pcs rear drive shaft & 4Pcs wheel hex hub.The built-in anti-separtion design, reduce the....
Check Stock

FOREDOM SHEATH Part S-77 FLEX SHAFT MOTORS STANDARD OUTER SHEATH 36-1/4\ LONG (E 8)

  • FOREDOM SHEATH S-77 OUTER FLEX SHAFT MOTORS SHEATH 36-1/4" LONG.
  • FOREDOM 77 Original 36-1/4" LONG OUTER SHEATH REPLACEMENT PART- tandard models. This outer Sheath is for use with S-93 key tip inner shafts sold separately. NOTE: last picture show Shaft and Grease which can be purchased at our store. A Foredom flexible shaft motor Maintenance-Replacement Part. FOREDOM Item Number: S-77.
Check Stock

CNBTR Yellow 3MM Hole Dia Brass Gear Shaft + 31MM OD 60 T Brass Gear Wheel 0.5 Modulus Set

  • Size 1: Brass Gear Wheel: 0.5 Modulus, 60T, Hole Diameter: 6mm/0.24inch. Size 2: Brass Gear Shaft: 0.5 Modulus, Outer Diameter: 9.7mm/0.38inch, Inner Diameter: 3mm/0.12inch..
  • The transmission structure of gear shaft is simple, compact, small volume and light weight. Easy to install and use..
  • Shaft Z1=1, turn a round of gear T, can get a large transmission ratio, generally in the power transmission, the transmission ratio I=10-80, like big transmission ratio, if use with gear transmission, will need to take the multi-stage transmission..
  • The item contains one 0.5 modulus 3mm hole dia brass gear shaft and one 60T brass gear wheel..
  • Made of brass material, not easy to wear, durable and lasting performance. This gear wheel & shaft are the excellent industrial replacement accessory..
Check Stock

ABN Front Wheel Drive Axle Pulley Attachment - CV Axle Removal Tool CV Joint Slide Hammer Adapter

  • [Remove Front Wheel Drive Axles Easily] To replace or repair your constant velocity (CV) axle joints, use the ABN Front Wheel Drive Axle Puller Attachment.
  • Inner CV axle puller designed to pull joints with hidden retaining rings from FWD vehicles.
  • [Works with Your Slide Hammer] The CV joint puller attaches to your slide hammer and allows you to create added torque to loosen and remove stubborn axle shafts and water pumps.
  • Fits slide hammers with 5/8-inch x 18 threads.
  • [Easy to Use] Attach the inner CV removal tool to your slide hammer then slide the adapter around the shaft behind the inner boot.
  • Use the slide hammer to create torque to pull out the axle.
  • Use lubricant fluid for added ease (not included).
  • [Safe for Your Vehicle] Unlike pry bars or CV axle fork tools, the CV shaft slide hammer axle attachments focus the added torque to the back of the housing to prevent damage to the roller bearing inside the joint.
  • Pulls CV joints on 1986-current Taurus/Sable.
  • [Built to Last] Heat-treated CV puller adapter with black oxide finish ensures optimal strength and durability while r....
Check Stock

Lidscura 8PCS Motorcycle Bearing Pullers 9-23mm Motorcycle Internal Bearing Removal Tool Kit Inner Bearing Extractor Kit

  • Widely Application: This Remover tool kit is ideal for internal bearing removal of automotive flywheel, motorcycle wheel, bicycle wheel, pump bearing generator bearing, machine bearing etc..
  • Meet Your Different Needs: Internal bearing Extractor tool set is equipped with 5 different sizes of open clips. The bearing can be disassembled from 0.35inch(9mm) to 0.91 inch(23mm) inside diameter..
  • Fine Workmanship: This motorcycle bearing pullers set is made of high-quality chrome vanadium steel, strong and durable for for a long service time..
  • Easy to Use: Connect this bearing puller kit with 1/2" 3/4" male thread water faucet, open clamps by turning handle clockwise to snug against the bearing for taking out the inner bearing..
  • Instructions for use: First the tool head into the inner ring of the bearing, and then screwed into the shaft, the tool head propped open hooked bearing inner ring, and then turn the shaft, you can pull out the bearing.
Check Stock