Top Input 90 250v Ac

KFD DC Adapter Car Charger for Resmed S10 Series,ResMed Airsense 10 S10 AirCurve 10 Series CPAP and BiPAP Machine,90W Resmed S10 370001 37297 Rockpals 300W/500W Vehicle Power Supply Cord Cable Charger

  • ⚠️⚠️⚠️❤Attention: ⚠️⚠️⚠️❤1.If the vehicle charger works abnormally, please open its DC terminal to check whether the fuse tube is damaged. If so, please replace the 250V 16A fuse tube, then the product can be used normally. ⚠️⚠️⚠❤2.When the vehicle charger is connected to the equipment, it can support the instantaneous maximum input voltage peak value of 10V-30V..
  • ⚠️⚠️⚠️❤3.If the product is applied on other devices than the vehicle, the DC input shall meet the following power: When its DC input is 12V, the input current should no less than 8.3A.
  • When its DC input is 24V, the input current should no less than 4A, Otherwise, the vehicle charger may not work..
  • Input DC: 12V-24V (9–32V DC MAX) Output:24V 3.75A 90W.
  • Compatible With ResMed Airsense 10 Series: AirSense 10, AirSense 10 Elite, AirSense 10 AutoSet, AirSense 10 AutoSet for Her CPAP Machine with HumidAir Heated Humidifier.
  • Fits Resmed CPAP and BiPAP Machines S10 370001 +24V 3.75A 90W.
  • ResMed AirCurve 10 Series CPAP and BiPAP machine: AirCurve 10 S BiLevel Machine, AirCurve 10 VAuto BiLevel Machine with HumidAir Heated Humidifier.
Check Stock

KFD DC Adapter 3 Pin Jack for 90W Resmed S9 Series Res Med IPX1 CPAP Machine S9 H5i REF 36003 369102 R360-760 DA-90A24 CPAP 36970 S9 Elite Machine S9 Escape Machines 12-24V Car Charger US Power Supply

  • ⚠️⚠️⚠️❤Attention: ⚠️⚠️⚠️❤1.If the vehicle charger works abnormally, please open its DC terminal to check whether the fuse tube is damaged. If so, please replace the 250V 16A fuse tube, then the product can be used normally. ⚠️⚠️⚠❤2.When the vehicle charger is connected to the equipment, it can support the instantaneous maximum input voltage peak value of 10V-30V..
  • ⚠️⚠️⚠️❤3.If the product is applied on other devices than the vehicle, the DC input shall meet the following power: When its DC input is 12V, the input current should no less than 8.3A.
  • When its DC input is 24V, the input current should no less than 4A, Otherwise, the vehicle charger may not work..
  • Input DC: 12V-24V (9–32V DC MAX) Output:24V 3.75A 90W Connector Size:3 Pin. Total Cable Length 2.6M.
  • Compatible with Resmed S9 Series Res Med IPX1 CPAP Machine S9 H5i REF 36003 369102 R360-760 DA-90A24 CPAP 36970 S9 Elite Machine S9 Escape Machines.
Check Stock

BLUETTI AC200P Solar Generator with Panels Included 2000W Portable Power Station with 3pcs Foldable Solar Panel 120W SP120, Solar Power Generator for Van House Outdoor Camping

  • ...C200P solar power station (2000Wh/2000W,surge 4800W) and 3 Pcs 120W foldable solar panels(BLUETTI SP120, MC*4 solar charge cable length 118inch) , all the accessories for BLUETTI AC200P( 1*AC Adapter Charger*1,Solar Charging Cable(MC*4 to XT90,about 67inch)*1, Car Charging Cable(Car to XT90)*1,XT90 to Aviation Plug(input)*1, Manual*1)..
  • 【BLUETTI AC200P 2000Wh Power Station】-Solar/AC/Car/Generator/Lead-acid Battery Recharge: Wide 35-150V/Max.700W/12A solar Input, MPPT, allowing full recharge AC200P within 3-3.5Hrs(Only if Max.700W solar input). About 5.5Hrs to fully recharge it by One 400W AC adapter & supports 3Hrs by dual AC adapters (need to buy the 2nd adapter+DC7909 to XT90 cable separately).You can fully recharge it by 24V/12Vcar in about 10Hrs/20Hrs. AC+PV recharge AC200P simultaneously in about 2.5Hrs..
  • 【BLUETTI 120W Solar Panel】It’s made of high qualified monocrystalline silicon cells which is 5% higher efficient than traditional monocrystalline. It features with ETFE lamination thus has better light transmittance, more durable, scratch-proof, and easy to clean by wet cloth. Foldable design with handle, weight only 9.48lbs. Convenient to carry around for outdoor camping. Easily adjust the angle by the kickstands for better solar absor....
Check Stock

KFD DC Adapter for Resmed S9 Series Res Med IPX1 CPAP Machine S9 H5i REF 36003 R360-760 DA-90A24 CPAP 36970 S9 Elite Machine S9 Escape Machines 24V 3.75A 90W 12-24V Car Charger Power Supply Cord 3 Pin

  • ⚠️⚠️⚠️❤Attention: ⚠️⚠️⚠️❤1.If the vehicle charger works abnormally, please open its DC terminal to check whether the fuse tube is damaged. If so, please replace the 250V 16A fuse tube, then the product can be used normally. ⚠️⚠️⚠❤2.When the vehicle charger is connected to the equipment, it can support the instantaneous maximum input voltage peak value of 10V-30V..
  • ⚠️⚠️⚠️❤3.If the product is applied on other devices than the vehicle, the DC input shall meet the following power: When its DC input is 12V, the input current should no less than 8.3A.
  • When its DC input is 24V, the input current should no less than 4A, Otherwise, the vehicle charger may not work..
  • Input DC: 12V-24V (9–32V DC MAX) Output:24V 3.75A 90W.
  • Connector Size:3 Pin. Total Cable Length 2.6M.
  • Compatible with Resmed S9 Series Res Med IPX1 CPAP Machine S9 H5i REF 36003 R360-760 DA-90A24 CPAP 36970 S9 Elite Machine S9 Escape Machines.
Check Stock

BLUETTI Portable Power Station AC200P 2000W 2000Wh Solar Generator 700W PV Max. Backup Battery Pack with 6 2000W AC Outlet(4800W Surge) for RV Home Emergency Outdoor Camping Explore …

  • ...ly for CPAP ssers. 3)Our unique “BLUETTI ECO”mode can prevent up to 50% of wasted electricity loss..
  • 【What You Can Get】: 24 months warranty. package include-1*portable power station (AC200P), 1*500W AC wall charger, 1*PV solar charging cable(MC4 to XT90), car charging cable(Car to XT90),XT90 to aviation plug(input),1*user manual, 1*customer service card..
  • 【700W/12A(Max) Solar/500W AC/Car/Generator Recharge】: with a Max 700W solar input allowing full recharge AC200P within 3-3.5 hours. solar charge mode: MPPT. allowing up to 40% faster charging times from the solar panels. 4.5Hrs to fully recharge it by one 500W ac adapter and supports 2.5Hrs by dual ac adapter (need one DC7909 to XT90 cable).you can also fully recharge it by 24V/12V car in about 10Hrs/20Hrs. AC(500W)+PV(solar input 700W) recharge AC200P simultaneously in about 2.2Hrs..
Check Stock

BLUETTI AC200P Portable Power Station with Solar Panel Included 2000W Solar Generator Kit with 3pcs 200W Foldable Solar Panel, 6 120V AC Outlet Lithium Battery Backup for Home Use Outdoor Camping Van

  • ... AC200P solar power station (2000Wh/2000W,surge 4800W) and 3 Pcs 200W foldable solar panels(BLUETTI SP200, MC4 solar charge cable length 118inch) , all the accessories for BLUETTI AC200P( 1*AC Adapter Charger*1,Solar Charging Cable(MC4 to XT90,about 67inch)*1, Car Charging Cable(Car to XT90)*1,XT90 to Aviation Plug(input)*1, Manual*1.
  • 【BLUETTI AC200P 2000Wh Power Station】-Solar/AC/Car/Generator/Lead-acid Battery Recharge: Wide 35-150V/Max.700W/12A solar Input, MPPT, allowing full recharge AC200P within 3-3.5Hrs(Only if Max.700W solar input). About 5.5Hrs to fully recharge it by One 400W AC adapter & supports 3Hrs by dual AC adapters (need to buy the 2nd adapter+DC7909 to XT90 cable separately).You can fully recharge it by 24V/12Vcar in about 10Hrs/20Hrs. AC+PV recharge AC200P simultaneously in about 2.5Hrs..
  • 【BLUETTI 200W Solar Panel】It’s made of high qualified monocrystalline silicon cells which is 5% higher efficient than traditional monocrystalline. It features with ETFE lamination thus has better light transmittance, more durable, scratch-proof, and easy to clean by wet cloth. Foldable design with handle, weight only 14.3lbs. Convenient to carry around for outdoor camping. Easily adjust the angle by the kickstands for better solar absorpt....
Check Stock

SEYAS 500W Auto Step Up & Step Down Voltage Transformer Converter, 110-120 to 220-240 Volts, Soft Start & Full Load, 7x24hrs Continous Run, Circuit Breaker Protection, U.S. Patent No. US9225259 B2

  • The SEYAS Advantage: Automatic Voltage Conversion Technology (US Invention Patent No. US9225259 B2). Automatic recognizes the input voltage and convert to the correspond voltage. Manual selecting input voltage is no need any more. Auto convert voltage from 110-120 volt up to 220-240 volt or from 220-240 volt down to 110-120 volt. Premium chip deliversefficientperformance for transformer..
  • Multiple Sockets: 3 AC outputs, 1US Standard Socket for 110-120V appliance(s) & 2 Universal Sockets accept all types of plugs except the Big South African plug for 220-240V appliance(s). Patented Wonpro Upgraded Outlets, work well and are secured in gripping plug firmly. The transformer can be used in countries which voltage are 90V125V or 180V250V such as US, EUR, UK, JP and more..
  • Durable Design: 24*7 hrs work time and 100% loading capacity. Provided 100% FULL Load Capacity, Maximum Power Support 500Watt. Premium chip deliversefficientperformance for transformer. High efficiency toroidal transformer inside with stable output and low consumption for a safe, cost-effective use. Built-in silence equipment to lower the noise. Work well with super-quiet performance. 380 Joules Surge Protector inside protects your appliances from unstable surges..
Check Stock

1A Car Charger+AC Home Wall Power Adapter Cord for Samsung Camcorder HMX-F90 BN HMX-F90 BP

  • 1A Car Charger+AC Home Wall Power Adapter Cord For Samsung Camcorder HMX-F90 BN HMX-F90 BP.
  • Car charger:input -- 12-24V, output -- 5V, 2000mA max.
  • AC charger: input --100-240V, output -- 5V, 1000mA max.
  • Connect your camcorder to car lighter jack or AC wall power jack for power charging..
  • Intelligent Switching circuit will recognize a full battery & automatically switches to a save mode..
  • Package includes: 1 AC wall charger + 1 DC car charger.NOTE: this charger charges through the USB jack, NOT the DC-IN jack..
Check Stock

AITRIP 8 Pack 3V 1 Channel Relay Power Switch Module with Optocoupler Opto Isolation High Level Trigger for IOT ESP8266 Development Board

  • 【30VDC 250VAC Load】 Equiped with high-current relay, AC250V 10A.
  • DC30V 10A, each relay has normally open and normally closed contact. Can be selected by jumper relay and TTL or ground..
  • 【High Level Trigger】The relay module is triggered by high level signal, which can be input from microcontroller IO..
  • 【 3V/3.3V power relay module】- This Relay Board provides a single relay that can be controlled by any 3V/3.3V digital input from your microcontroller IO..
  • 【Wide Application】- These 3v relay board works well with ARM /PIC /AVR /MCU/Raspberry/CNC machine/ PS4/3.3V /NodeMCU/ ESP8266 module etc..
  • 【Long Life】 - Fast response time less than 20ms and long lifetime up to 100,000 times snap action with diode freewheel protection..
Check Stock

ANMBEST 2PCS 4 Channel 5V Relay Module with Optocoupler High or Low Level Trigger Expansion Board for Raspberry Pi Arduino

  • It is 4 Channel Isolated 5V 10A Relay Module, each relay can individually switch on/off by an opto-isolated digital input, Standard interface can be directly connected with microcontrollers and be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, DSP, etc., very convenient..
  • Equipped with high-current relay, maximum load: AC250V 10A, 15A 125VAC, DC30V 10A.
  • RELIABLE: Fault-tolerant design, even if the control line breaks, the relay will not move.
  • With optical coupling isolation, triggering more reliable, more stable..
  • EASY to INSTALL: Equipped with screwed terminal plate and fixed bolt holes(diameter: 3.1 mm) on both sides for easy installation..
  • High/Low level trigger can be selected by jumper. Very versatile, you can reverse the input logic with the jumper..
Check Stock

MPSSAA Side Step Running Board for Land Rover for Range Rover Sport 2008-2013 Bar Intelligent Electric Automatic Switch Door Control Running Board Side Step

  • 30A High Current 12V Contactor relay Switch DC power Switching Control Board.
  • Using high-quality ultra-small optocoupler, anti-interference ability, stable performance..
  • Using 9.5mm black fence terminal, standard 30A terminal, stable and solid, reliable quality..
Check Stock

[4-in-1] 15 Amp Household AC Plug to 20 Amp T Blade Adapter,5-15P to 5-20R,5-15P to 6-15R,5-15P to 6-20R 4 in 1 AC Power Adapter,15A 125V to 20A 250V Adapter

  • [4 in 1] AC Power adapter. Nema 5-15P 15-AMP male 125V to Nema 5-15R/5-20R/6-15R/6-20R ac adapter.
  • Compatible 1: Nema 5-15P 15-AMP Male(125V) to Nema 5-15R 15-AMP Male(125V) Female ac adapter.
  • Compatible 2: Nema 5-15P 15-AMP Male(125V) to Nema 5-20R 20-AMP Male(125V) Female ac adapter.
  • Compatible 3:Nema 5-15P 15-AMP Male(125V) to Nema 6-15R 15-AMP Male(250V) Female ac adapter.
  • Compatible 4:Nema 5-15P 15-AMP Male(125V) to Nema 6-20R 20-AMP Male(250V) Female ac adapte.
Check Stock