Top Input Filter

Schulz Refrigerated Air Dryer for Air Compressor Compressed Air Systems 35 cfm Good for 7.5hp & 10hp Compressors with Pre-Filter

  • NEW 35 CFM SCHULZ NON-CYCLING REFRIGERATED AIR DRYER WITH INDUSTRIAL RATED WATER SEPARATOR + OIL REMOVING COALESCING FILTER.
  • THIS IS A COMPLETE KIT OF EVERYTHING YOU NEED FOR MOISTURE AND OIL FREE ULTRA DRY AIR ( COMPRESSED AIR PIPING NOT INCLUDED).
  • DRYER: 35CFM @ 100 PSI / 1/2" FEMALE NPT INLET & OUTLET / DEW POINT: 41 DEGREES / 200 PSI MAX INLET / MAKE SURE YOUR COMPRESSOR OUTPUT IS A MAX OF 175PSI SO TO NOT DAMAGE THE STAGE 1 & 2 FILTERS. IF YOU NEED PRE-FILTER WITH REGULATOR, PLEASE SELECt " REGULATOR PRE-FILTER" OPTION ABOVE.
  • STAGE 1: WATER SEPARATOR RATED FULL INDUSTRIAL / 175 PSI MAX INPUT / 5 MICRON ELEMENT REMOVES 95% OF MOISTURE + INTERNAL FLOAT DRAIN (AUTO DRAIN).
  • STAGE 2: COALESCING FILTER RATED FULL INDUSTRIAL / 175 PSI MAX INPUT / 0.01 MICRON ELEMENT REMOVES ALL REMAINING MOISTURE + OIL FROM COMPRESSED AIR LINES ALSO EQUIPPED WITH METAL BOWL AND AUTO DRAIN.
Check Stock

Rockville REQ215 Dual 15 Band 1/3 Octave Graphic Equalizer with Sub-Output

  • The Rockville REQ215 is a Dual Channel 30 Band (15 bands per channel) rack mountable EQ. Dual channel (15 bands per channel). Switchable 12 Band or 6dB boost/cut range..
  • 80Hz 24dB low cut filter. 2/3 octave filter sets. 25 Hz to 16 kHz effective equalization range. Constant Q filters. Output level LEDs (-12 to +17 dB). Low cut filter switch with status LED..
  • XLR inputs and outputs for balanced operation. Bypass switch with status LED. Balanced XLR input/output. Subwoofer out. Subwoofer X-Over Freq ( 30Hz - 200Hz ) selecting..
  • Connectors : XLR balanced inputs and outputs. Ground lift switch. Frequency Centers : 31.5 Hz, 40 Hz, 63 Hz, 100 Hz, 160 Hz, 250 Hz, 400 Hz, 500Hz, 630 Hz, 800 Hz, 1 kHz, 2 kHz, 4 kHz, 8 kHz, 16 kHz..
  • Input Impedance : 20k ohms. Output Impedance : 1.5k ohms. Maximum Output Level : 11 VAC. Level Control : +/- 12 dB. Signal to Noise : 90 dB. Distortion : 0.03%. Power : 120 Volt..
Check Stock

AIYIMA A03 2.1 Channel TPA3116 Subwoofer Bluetooth Amp HiFi Power Amplifier DC12-24V 50W x 2 + 100W (A03 Black+DC 24V Adapter)

  • Support two input, one AUX input, connect wired analog signal input.
  • another one Bluetooth wireless input, can connect with mobile phone, computer and other Bluetooth devices.
  • Support the frequency adjustment of the subwoofer, you can adjust the bass frequency according to your needs.
  • support the bass frequency adjustment of the left and right satellite boxes, making the left and right speaker output more playable.
  • in addition, the left and right speakers can also be used when the subwoofer is not connected.
  • Two pieces of TPA3116D2 , one for the left and right channel output, one for the subwoofer output, the Bluetooth part adopts the imported CSR8635 high quality Bluetooth receiver, and the internal uses 4 NE5532 op amps, 3 of which can be plugged and unplugged, which is convenient for customers to change different styles. Op amps, increase playability.
  • Material, plug-in capacitors all use original imported goods, Japan NICHICON 6800uF large reservoir, ELNA audio coupling, black diamond filter RIFA EVOX filter..
Check Stock

Rockville RW10CA 10" 800 Watt Under-Seat Slim Amplified Car Subwoofer +Wire Kit

  • Rockville RW10CA 800 Watt 10” Slim Car Subwoofer 800 Watts Peak / 200 Watts RMS PWM MOSFET Power Supply.
  • Low Level RCA Input High Level Inputs with Auto Turn-On Technology Adjustable Input Sensitivity.
  • Soft Delayed Remote Turn-On Thermal Protection Circuit, Short Protection Circuit Overload Protection Circuit.
  • Phase Switch: 0° or 180° Low Pass Filter: 50Hz - 150Hz Bass Boost: 0 - 18dB @ 45Hz.
  • Subwoofer Level Remote Control Built in Subsonic Filter @ 29Hz.
Check Stock

Nanolux OG Series Digital Ballast 400W APP 120/240v

  • Dims automatically with hi temperature safety feature when paired with RTU.
  • Ballast comes with an exclusive RF filter in the input cord for class leading lowest RF EMC output.
Check Stock

Nanolux OG Series Digital Ballast 600W APP 120/240v

  • Ballast comes with an exclusive RF filter in the input cord for class leading lowest RF EMC output.
  • Dims automatically with hi temperature safety feature when paired with RTU.
Check Stock

American Bass PH-2500.1-MD-V2 Class D Digital Power Car Amplifier

  • 1 ohm stable D class mono-block amplifier, 2500 Watts RMS.
  • Variable subsonic filter: 10Hz to 50Hz at 24dB per octave.
  • Variable low pass filter: 35Hz to 250Hz at 24dB per octave.
  • Two amplifiers linkable connector and selector.
Check Stock

Can I Get a Witness [Explicit]

  • Independent REAMPING and DI functions 2 in 1 Guitar Effect Pedal, DI features low-cut, phase reverse, stereo mix and more, REAMPING Input Jack: 6.35mm and XLR 2 in 1 Input Jack, accepting both 6.35mm TRRS and XLR..
  • No need of battery,48V phantom powered DI box, high dynamic range, retaining the nuances of instruments' sound. ..
  • Grounding switch turns off the internal grounding channel between the Input& Output, High Input Impedance reduces pick-up loading..
  • Low-cut filter, -1 5dB attenuation, it features polarity reverse..
  • Suitable for signal switching during professional recording and live performance..
Check Stock

SFB-1500D - Sundown Audio Monoblock 1750w RMS Amplifier

  • Features: Monoblock Class D Amplifier. Power Handling: Maximum Output Power at 14.4V DC 1-Ohm: 3000W RMS | Maximum Output Power at 14.4V DC 2-Ohm: 2025W RMS | Maximum Output Power at 14.4V DC 4-Ohm: 1140W RMS. Input Sensitivity: 200MV, Signal-to-Noise Ratio: 86dB, Frequency Response: 10Hz-20kHz (-3dB)..
  • Crossover: High Pass Filter: 15 to 80Hz (-12dB/8) Variable | Low Pass Filter: 80Hz to Full (-12dB/8) Variable. Bass Boost: 0 to 12dB (50Hz), Thermal Management: Smart Cooler (Fan Powered by Temperature or Audio with 3 Speeds), Input Impedance: 56K-Ohms, Protection System: Output Short/High/Low Supply Voltage/Thermal Protection, Minimum Supply Voltage: 9V DC, Maximum Supply Voltage: 16V DC, Dimensions: TBA..
Check Stock

Sundown Audio SIA-2500D Monoblock 2500W RMS Amplifier

  • Features: Monoblock Class D Amplifier. Power Handling: Maximum Output Power at 14.4V DC 1-Ohm: 3000W RMS | Maximum Output Power at 14.4V DC 2-Ohm: 2025W RMS | Maximum Output Power at 14.4V DC 4-Ohm: 1140W RMS. Input Sensitivity: 200MV, Signal-to-Noise Ratio: 86dB, Frequency Response: 10Hz-20kHz (-3dB)..
  • Crossover: High Pass Filter: 15 to 80Hz (-12dB/8) Variable | Low Pass Filter: 80Hz to Full (-12dB/8) Variable. Bass Boost: 0 to 12dB (50Hz), Thermal Management: Smart Cooler (Fan Powered by Temperature or Audio with 3 Speeds), Input Impedance: 56K-Ohms, Protection System: Output Short/High/Low Supply Voltage/Thermal Protection, Minimum Supply Voltage: 9V DC, Maximum Supply Voltage: 16V DC, Dimensions: TBA..
Check Stock

dbx AFS2 Advanced Feedback Suppression Processor with Full LCD Display,Black

  • Easy-to-read display: navigate menus, interact with the AFS2 Wizard, and easily manipulate settings with the bright, legible, interactive display.
  • Xlr and 1/4” TRS connections: interface with any professional audio equipment with either connection.
  • Input signal meters: accurately monitor input signal levels with five segment LEDs per channel plus red clip LED indicator.
  • Wizard functions: the AFS2 feedback suppression Wizard makes setup easy and approachable for users with varying levels of technical know-how.
  • 24 programmable filters per channel with 24 LED per channel filter metering.
  • application-specific filter types include: speech and music low, Med and high.
Check Stock

AUNE X1s GT DAC with Headphone AMP, PLL Technology Desktop HiFi Decoder

  • ...Fully-discrete Headphone AMPs: The X1s GT’s amp board has 4 fully-discrete headphone amplifiers. 277 parts and components in total, among which, 96 are BJTs. It uses ±9v power supply. It’s a “huge” amp board compared to those of the same level DACs with amps. The hardware performance is outstanding..
  • Unique Filter Modes: Instead of using the ES9038 series’ default filter modes, we designed 4 filter modes for the X1s GT with our own algorithm. The X1s GT was designed to be a special product. It must have its characteristics and they show our understanding of music..
  • GT Concept: We put our hearts in it. According to the BOM of the X1s GT, the whole device has 733 components and parts, among which, the headphone amp board has 277. The quiescent current reaches 700mA. Plus professional tuning. It’s a product special from the inside to the outside..
Check Stock