Top Input Module

ACS712 Hall Effect Current Sensor Module 5A 20A 30A Range + Voltage Sensor Module DC0-25V Voltage Tester Terminal Sensor for Arduino

  • 【Perfect Combination】Using this product can measure both voltage and current, very suitable for DIY electronic design projects..
  • 【Package Included】1pcs x 30A,1pcs x 20A, 1pcs x 5A ACS712 Current Sensor Module, and 1pcs x Voltage Sensor Module DC0-25V Voltage Tester Terminal....
  • 【Current Sensor Module】Chip: ACS712ELC-05A，Measuring range: ±5 amps, corresponding Analog output:185mV/A.--- ACS712ELC-20A，Measuring range:....
  • 【Voltage Sensor Module】Voltage input range: DC0-25V.
  • 【Pls Note】: ACS712 is based on the principle of Hall detection, please avoid the influence of magnetic field when using it!.
Check Stock

ALMOCN 12pcs 18650 18650 Lithium Li-ion Battery Charger Module 2A USB TP4056 Adjustable Boost Module DC-DC 3.7V to 5V 9V 12V Step Up Boost Module DIY Kit Parts

  • Output voltage: 4.3-27V DC (Continuously adjustable).
  • Battery charger module combines the TP4056 battery charger with a boost circuit. Adds a battery and converts a low power DC device to a USB rechargeable device..
  • Charging current: Max 1A, Discharging current: Max. 2A.
  • Instructions for use: TP4056 Charger Module can be used for multimeter to convert to charge lithium batteries. VIN+ port input 5V solar panel, BAT+ port can output 4.2V to charger 3.7V 18650 battery..
  • 2A USB 18650 Lithium Li-ion Battery Charger Module Adjustable Boost Module DC-DC 3.7V to 5V 9V 12V Step Up Boost Module TP4056 DIY Kit Parts.
Check Stock

DEVMO 8-32V to 45-390V DC-DC High Voltage Boost Converter ZVS Step-up Booster Module

  • Module Properties: Non-isolated step-up module.
  • The power supply for your electronic device, according to your system can set the output voltage value..
  • Input Voltage: 8~32V input(the default is 10~32V input.).
  • Quiescent current: 15mA (12V liter 50V, the output voltage, the higher the current will increase too quiet).
Check Stock

1200W High Power DC to DC Boost Converter, PEMENOL DC 10-36V to 12-80V Boost Module Step-up Transformer, Adjustable Charging Power Supply for Electric Vehicles and Solar Power

  • ★High Power DC to DC Boost Converter: This module with a function of constant voltage and constant current. It can be used to provide charge for electronic devices. Suitable for voltage stabilization of solar panels, charging of batteries, lithium batteries, etc.
  • ★Wide Input Voltage and Output Voltage: Input voltage: 10-36V.
  • output voltage:12-80V. The output current can be adjusted(Max 20A). ultra-low input and output voltage difference. When the current > 18A, please strengthen the heat dissipation.
  • ★With Overcurrent and Short Circuit Protection : Double short-circuit protection (input 20A fuse).
  • with output anti-reverse flood protection, no need to add anti-reverse diode when charging.Note: There is no reverse connection protection, if you have this need, please connect a diode in series with the input.
  • ★Large Heat Sink: Large heat sink design (85mm*62mm*64mm), and it has been processed with black oxidation (black oxidation has better heat dissipation). Which can prolong the service life of the module and make the conversion efficiency of the module higher.
  • ★Widely Application: High-power LED constant current drive, Lithium battery charging, Ni-Cd or Ni-MH battery charging, Solar panels, Wind Turbines, and so on.
Check Stock

DEVMO 2 Pcs 8-32V to 45-390V DC-DC High Voltage Boost Converter ZVS Step-up Booster Module

  • ★Module Properties: Non-isolated step-up module.
  • ★The power supply for your electronic device, according to your system can set the output voltage value..
  • ★Input Voltage: 8~32V input(the default is 10~32V input.).
  • ★Quiescent current: 15mA (12V liter 50V, the output voltage, the higher the current will increase too quiet).
Check Stock

DZS Elec 6pcs XL6009 DC-DC Booster Converter Module 3V-32V to 5V-35V 4A Adjustable Step-up Voltage Regulator 5V 9V 12V 24V Power Supply Module

  • XL6009 DC-DC Adjustable Booster Power Converter Module, High efficiency non-isolated booster module can be used for booster voltage stabilizer power supply, DIY adjustable mobile power supply, booster charger, etc..
  • Input Voltage: 3V-32V, The optimal operating voltage range is 5-32V.
  • Output Voltage: 5V-35V Continuing Adjust (Step-up module, output voltage is higher than input voltage).
  • Input Current: 4A (max) Non-Load 18mA (The higher voltage, the greater no-load current.).
  • The booster power board is equipped with 4A high-efficiency MOSFET switch tube, with the conversion efficiency up to 94%..
  • Ultra high switching frequency 400KHz, the filter capacitance with small capacity can achieve very good effect, smaller ripple and the volume..
Check Stock

High Frequency Transducer, Bandwidth Mixing Board Mixer Module -10dBm for Quadrature Modulation for Base Station for HF VHF Receiver

  • 【Important Data】: SSB noise figure (NF) of 9.75 dB--Input IP3: 28.5 dBm--Input P1dB: 13.3 dBm--Typical LO drive: 0 dBm--Power conversion gain of 1.8 dB.
  • 【Wild Used】: This 5V double balance up and down frequency mixer module is widely used for cellular base station receivers, Radio link down converters, Broadband block conversion, Instrumentation.
  • 【Low Power】: Our 130mA 50 Ohms Balun coil coupling frequency conversion mixer features adjustable bias for low power operation, so you can trust and use this RF mixer inverter with confidence.
  • 【Wonderful Components】: This 5V ADL5801 double balance up and down frequency mixer module is equipped with exposed paddle, 4mm x 4mm, 24-lead LFCSP package, so it will be an ideal choice for you.
  • 【Size】: Power supply: DC+5V@80mA(anti-reverse connection protection.)--RF_IN/RF_LO input frequency range: 10-6000Mhz--Input and output impedance: 50 ohm--Type:Input Balun coupling, Input/output Balun coupling(Optional)--Weight: Approx.15g/0.5oz.
Check Stock

Dorman 599-217 Front Climate Control Module Compatible with Select Chevrolet/GMC Models

  • Direct replacement - this HVAC control module is specially designed to match the appearance and function of the original unit in select vehicles.
  • Plug-and-play installation - just remove the old module, plug in new module, and vehicle performs automatic recalibration.
  • Design options - module comes with both older and newer knob designs so you can pick your preference.
  • 100% new - module is newly manufactured, not remanufactured, with state-of-the-art components.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

DROK® DC-DC Buck Converter 3.5-30V to 0.8-29V 10A Step-down Volt Adjustable Output Voltage Regulator Module Power Supply with High Accuracy Voltmeter Red Digital Tube Display

  • DROK DC buck converter input voltage range is DC 3.5~30V, output adjustable voltage range is DC 0.8~29V, max output current is 10A, conversion rate....
  • LED Voltage Meter: the step down regulator is equipped with high accuracy voltmeter, red LED display, press the key to switch display input voltage or....
  • Metal Case: DROK volt transformer is designed with metal case, can protect the module from destroying, and the case itself is a heat sink, excellent....
  • Note: please make sure that the input voltage is higher than the output voltage at least 1V.
  • please note that this module doesn't have reversed....
  • Small Size: the switching power supply module is with compact design, dimension is 85mm*58mm*33mm(L*W*H)..
Check Stock

3v Relay Board Raspberry Pi Arduino Relay Module 1 Channel Opto-Isolate High Level Trigger for IOT ESP8266 Microcontrollers Development Board

  • 【1 Channel Relay Module】- This Relay Board provides a single relay that can be controlled by any 3V/3.3V digital input from your microcontroller IO..
  • 【Main Specification】- The 3v Relay 1 Channel power switch module compatible with 10A 250VAC and 10A 30VDC load.4pcs * 2.5 mm Fixed Bolt Hole..
  • 【Adopted Optocoupler Isolation】- 3V/3.3V power relay module supports photocoupler isolation control and dual power supply input ensure high anti-interference ability. Fast response time less than 20ms and long life time up to 100,000 times snap action with diode freewheel protection..
  • 【Jumper Caps】You can select whether the relay and the signal use the same power supply or not by removing the jumper caps on the pins. And It is better to share the same power supply, because that is more convenient for using..
  • 【Wide Application】- These 3v relay board works well with Arduino/ ARM /PIC /AVR /MCU/Raspberry/CNC machine/ PS4/3.3V /NodeMCU/IOT/ ESP8266 module etc..
Check Stock

UMLIFE 4PCS AC/DC to DC Step Down Buck Converter AC 5-30V DC 5-48V 24V 36V 48V to DC 2.5-35V 12V Voltage Regulator Board 2A Adjustable Volt Power Supply Module

  • 4PCS LM2596HV AC/DC to DC Buck Step Down Converter Module 3v 3.3V 5V 6V 9V 12V 15V 24V DC 5V-50V Adjustable Step-Down 3A Power Supply.
  • Adjustable AC/DC to DC buck converter power supply module Voltage Regulator.
  • Input ac voltage AC5V~AC30V or dc5v-50v. Due to the large fluctuation of ac voltage, the recommended ac voltage range has been reserved..
  • The power module adopts plug-in LM2596HV, LM2596 version of high voltage, the highest input voltage is 50V(limited by filter capacitor voltage) with external radiator, can withstand high current work..
  • Input voltage range: AC 5V-30V, DC 5V-50V Output output range: DC 3.3V-33V.
Check Stock

15pcs 5V 1A TP4056 Charging Module Type-C USB 18650 Lithium Battery Charger Board with Protection (Type-C USB)

  • Power Indicator: Red is charging, Green is fully charged..
  • Application:It can charge for single-cell lith ium battery or multi-section parallelled lith ium batteries, can be powered by USB ports.
  • The module with usb port, can be directly input to do with rechargeable lith ium battery as a phone charger, and still retains voltage input wiring pads, which is convenient for DIY..
  • Note:Please check all connections before charging, it will be damaged if the load OUT terminal on the positive and negative with wrong polarity. There is not included Installation instruction.If you are the first time to do this job, we suggest you can watch related video on Youtube before installation..
  • Package includes:15*TP4056 Type-C USB Charging Module.
Check Stock