Top Input Voltage 12v

ACEIRMC 3pcs 20A 300W CC CV Step Down Module Adjustable DC 6-40V to 1.2-36V Voltage Regulator Buck Converter Constant Current Power Supply Module

  • Aceirmc buck converter input voltage range is DC 6-40V, adjustable output voltage range is DC 1.2-36V, can be used to convert 24v to 12v 5v, adjustable output current range is 0-20A, max output power is 300W. The step down regulator can apply to constant output current..
  • With a wide input voltage range from 6V to 40V, the step-down converter can accurately adjust output voltage and current. The efficiency can be up to 95%,(measured at 20A, converting 24V to 12V)..
  • Short Circuit Protection: Self-recovery(cannot short circuit for long time). Plus, when input and output is common grounded, no-load CV output constant voltage,CC output constant current.
  • Adopting 75V / 80A large current dual MOS tube designed step-down board, Input and output use high frequency low resistance electrolytic capacitor, low ripple, and gives a stable output. Large current 30A connection screw terminals, more convenient to install.
  • Application: DIY stabilized voltage supply, LED car display, mobile power, industrial equipment appliances, LED driver, monitor, solar energy, fans, photovoltaic energy, motor, etc....
Check Stock

Homedics D12-10-1000 12V DC 1000mA AC Adapter Power Supply

  • World Wide Input Voltage 100-240VAC 50/60Hz. OVP, OCP, SCP Protection (OVP: Over Voltage output Protection. OCP: Over Current output Protection. SCP: Short Circuit output Protection). Tested Units. In Great Working Condition. UpBright 30 days money back guarantee. 1 full year service warranty..
  • Input: 100-240VAC 50/60Hz NEW Type Circuit Design Universal Switching Mode Power Supply Replaces For OLD Type 120VAC 60Hz Input Class 2 Transformer. For More Compatibility..
  • UpBright [UL Listed] New Global DC12V AC / DC Adapter Compatible with Homedics D12-10-1000 ADP-2 12V DC 1000mA 12VDC 1A Power Supply Cord Cable Wall Charger.
Check Stock

CHANS TYC-40 Electric Synchronous Motor DC 12V 5RPM Shaft 35mm With Power Supply Input 100V-240V Output DC 12V For Ornamental Fiber Optic Christmas Tree

  • 【Description:】It's a combination of an DC 12V motor and a input AC 100V-240V and output DC 12V power supply. Easy to install and easy to operate.....
  • 【TYC-40 DC 12V Synchronous Motor Parameter:】 Voltage: 12V DC； Speed: 5r/min ； Shaft Length: 35mm； Shaft Screw Thread Inner Diameter:....
  • 【DC Power Supply Parameter:】 Input: AC 100-240V； Output: DC 12V ； Output current: 1500mA； Frequency: 60Hz； Power: 15W； Wire Length:....
  • 【Attention:】 1.The power adapter is an DC power supply,NOT suitable for AC motor. 2.Too high voltage will burn the motor and power supply.....
  • 【Package Include: 】 1*TYC-40 12V DC 5RPM 35mm Synchronous motor； 1*DC Power Supply； 1*Module.
Check Stock

Finish Carpentry (For Pros By Pros)

  • Dual input voltage: AC 110V-120V / 220V-240V.Wide voltage input adjusted automatically to SMPS Model (12V 1A-5A, 12W-60W). As for Model (12V 10A-66.7A 120W-800W), there is a voltage selector switch located on one side of the switcher that is used to set the input voltage to the power supply to either 110V/120V or 220V/230V. Output current depends on the device, such as 10A 120W, 20A 240W, 30A 360W, and the max current is 66.7A, power 800W..
  • How to choose: The peak power is 66.7A,800W. It does not mean it can fit rate power 800W. For motor devices, the start current will be much higher than the rated power. If use resistive equipment, such as led strips, you can use higher power, such as 800W rated LEDs will also be OK. Dial to the correct gear position cut off the power before disassembling the connection..
  • 3.Safe and Stable, Long Service Life: Switching power supply has over/under voltage, over current, overheat protection, and fan heat dissipation protection functions. Light and Portable, Easy to Operate: Net weight only 1.6Kg. Perfect choice to power led strips, car stereos, CCTV cameras, and other 12V powered systems..
  • How to use:The upgraded transformer has three connection methods to facilitate the use of different devices, super convenient for de....
Check Stock

Belker 12W Multi Voltage 3V 4.5V 5V 6V 7.5V 9V 12V Universal AC DC Power Adapter for Household Electronics - Max Amp 1000mA [BE]

  • This AC adapter output is 3V 4.5V 5V 6V 7.5V 9V 12V 1000mA 1A Max. 12W. Compatible with 300ma 350ma 400ma 500ma 750ma 800ma 900ma devices..
  • This multi voltage universal AC adapter can apply to most appliances which the rating input voltage is from 3V to 12V and rating power is equal to or....
  • Equipped with 8 premium adapter plugs[including a micro-USB plug], these different plugs are fit for many different small household electronics. It is....
  • The polarity of DC plug is inner Positive(+), outer Negative(-). If your device is with centre negative polarity "-", please use it with Belker....
Check Stock

Anbull SMPS 110V AC to 12V DC Converter Power Supply Adapter Switch Transformer Max 50A 600W New Version

  • Dual input voltage: AC 110V-120V / 220V-240V.Wide voltage input adjusted automatically to SMPS Model (12V 1A-5A, 12W-60W). As for Model (12V 10A-60A 120W-600W), there is a voltage selector switch located on the side of the switcher is used to set the input voltage to the power supply to either 110V/120V or 220V/230V.Output current depends on the decive, such like 10A 120W, 20A 240W, 30A 360W,and the max current is 50A,power 600W. ..
  • How to choose: The peak power is 50A,600W. It does not mean it can fit rate power 600W. For motor device, the start current will be much higher that rate power. If use resistive equipment , such like led strips, you can use higher power, such like 40A rated leds will also be OK..
  • Safe and Stable,Long Service Life:Switching power supply has over/under voltage, over current, over heat protection and fan heat dissipation protection functions.Light and Portable,Easy to Operate: Net weight only 1.2 Kg. Super convenient for devices with clamps. You can clamp to the two cylindrical contacts directly. It is a patent design.( US patent no : D954,647).
  • Make It Easy : Open circuit on the head, compared with other closed circuits, is easier to use, convenient to meet the wiring needs of various equipment, and more conducive to rebuildin....
Check Stock

Anbull 800W SMPS 110V AC to 12V DC Converter Power Supply Adapter Switch Transformer Max Current 66.7A

  • Dual input voltage: AC 110V-120V / 220V-240V.Wide voltage input adjusted automatically to SMPS Model (12V 1A-5A, 12W-60W). As for Model (12V 10A-60A 120W-600W), there is a voltage selector switch located on the side of the switcher is used to set the input voltage to the power supply to either 110V/120V or 220V/230V.Output current depends on the decive, such like 10A 120W, 20A 240W, 30A 360W,and the max current is 50A,power 600W. ..
  • How to choose: The peak power is 50A,600W. It does not mean it can fit rate power 600W. For motor device, the start current will be much higher that rate power. If use resistive equipment , such like led strips, you can use higher power, such like 40A rated leds will also be OK..
  • Safe and Stable,Long Service Life:Switching power supply has over/under voltage, over current, over heat protection and fan heat dissipation protection functions.Light and Portable,Easy to Operate: Net weight only 1.2 Kg. Super convenient for devices with clamps. You can clamp to the two cylindrical contacts directly. It is a patent design.( US patent no : D954,647).
  • Make It Easy : Open circuit on the head, compared wit....
Check Stock

Lights88 Laser Module Red\Line\ Laser Generator 650nm 5mw (2 Pack) Diode Lasers

  • 12V TTL 200mW To 2W 445nm 450nm Laser Diode LD Power Supply Driver Board.
  • Input Voltage: DC 8-14V Max. Output Voltage: DC 12V (adjustable) Max.
  • For Red, Green and Blue Laser Drive Power.
  • AC / DC can be used, regardless of positive and negative input to improve the non-professional user convenience.
Check Stock

MARK LAUREN Workout DVD - Bodyweight 90-Day Challenge | Total Fitness Bodyweight Exercise Program

  • ✔【Input&Output】: 100-240V AC input 50/60HZ, DC 12V 1Amp output, 12 Watt max wattage..
  • ✔【Wide Application】: Convert 100-240V AC to 12V DC, widely use for SMD2835 3528 5050 RGB LED strip lights, LED string, routers, ADSL Cats, HUB, switch, security camera, Audio/Video power supply..
  • ✔【Kindly Note】: The power adapter cannot be used as a charger. Please confirm that the output voltage of your electrical appliance is 12V before order. If the output voltage is lower or higher than 12V and the output current exceed 1A, please do not order! ! ! ! .This will cause the adapter to not work. Please be kindly informed that the total wattage of LED strip lights should not exceed the max wattage（12 Watt) of this adapter..
  • ✔【Package Includes】: 1 x 12V 1A 12W power supply with 3.3ft power cord..
  • ✔【Product Support】: Customers can get a full refund within 30 days or get a new product for free within 1 year due to product quality problems. We stand behind our products, please feel free to contact us via amazon "contact us" button..
Check Stock

New Version Converter, IMAYCC 110V AC to 12V DC Power Supply Transformer Adapter Charger Max 600W 50A

  • ...r build with aluminum alloy shell, built-in wire integrated design, dual power connection methods, very convenient for 12V devices with clamps, all copper nickel-plated terminal material, which has good electrical conductivity and high conversion efficiency..
  • 【Dual Input Voltage】Input voltage support AC 110V-120V and 220V-240V. Output range (12V, 1A-5A/12W-60W ) or (12V, 10A-50A/120W-600W). Voltage input will adjust automatically to SMPS model, Output current mainly depends on your device, such as 10A/120W, 20A/240W, 30A/360W. Max current up to 50A, Power 600W..
  • 【Smart Cooling System】Item Shell are designed with many heat dissipation holes, built-in cooling fan and dust-proof net, which effectively prevent dust from entering, ensure the stable rotation of the electric fan and prevent the circuit board from burning.
  • moreover, anti-skid pads are added to the bottom, which can also make the bottom better heat dissipation and work more stable..
  • 【Safe and Reliable】This 12V power supply carry overload, overvoltage, Leakage and short circuit protection function, compare with others , IMAYCC 12V power converter power co....
Check Stock

CBI Tools New Cable and Wire Grip 2000lb Capacity - Cable Size 3/32"-5/8"

  • 【Volt Adjustment】 Input Voltage can be 110V or 220V. Wide adjustable output Voltage range: DC 0-48V. This supply is suitable for 5V 9V 12V 24V 30V 36V 48V devices. The voltage precision is 0.1V. Note——The maximum current is 10A. But the actual current is depended on the load. No matter how many voltage is adjusted, the current is 10A and can not be regulated. It can be used to device of 2A 3A 5A 10A. Make sure to use the devices which is below 10A..
  • 【Hareware】 This Buck Converter is equipped with LED screen, heat sink and cooling fan. The LED screen can clearly display the output voltage. Heat sink and cooling fan can control the temperature in a safe range. During the running power is high, the cooling fan will automatically activate with little noise..
  • 【Easy Operation】 This supply is no need to install, after connecting wire, it can be used to adjust output, which is convenient. The potentiometer is inset into the supply. Only to rotate the potentiometer can adjust output parameter..
  • 【Protection】 Over Load Protection, Over Voltage Protection, Short Circuit Protection, which can protect your device from....
Check Stock

Agatige Frequency to Voltage Converter Module, 0-10Khz to 0-10V F/V Digital to Analog Converter Conversion Module

  • FUNCTION: The frequency of the pulse signal 0HZ to 10KHZ converts into an analog voltage signal of 0-10V. Can be used to interface switching between the PLC and the frequency converter, or interface matching such as the matching of motion control card and inverter control..
  • FEATURES: Input pulse level is 5V 12V 24V, which can be directly entered without serial resistor. The input signal frequency must maintain more than 0.5 seconds..
  • ANTI-INTERFERENCE: Conversion module's signal inputs with optical coupling isolation, which can ensure that the capability of anti-interfence..
  • APPLICATION: Frequency to Voltage Converter Module Can be used for industrial control panel PLC or other signal interface switching.
  • MAJOR SPECIFICATIONS: Output current: 5MA,Voltage: 0-10V, Input pulse level: 5V 12V 24V, Frequency: 0 to 10KHZ..
Check Stock