Top Insert Fittings
Habitech Irrigation Fittings Kit for 1/2 Tubing - 20 Piece Set - 6 Tees 6 Couplings 2 Elbows 6 End Cap Plugs - Barbed Connectors For Rain Bird And Compatible Drip or Sprinkler Systems
- Use these durable irrigation fittings to your connect 1/2" drip irrigation tubing. This 20-piece kit includes 6 tees, 6 couplings, 2 elbows and 6....
- These 17mm barbed fittings work with half inch drip tubing from 0.560 to 0.600 Inside Diameter (ID). Compatible with many types of Rainbird, Orbit,....
- The go-to fitting option for most contractors will always be the standard 17mm barbed insert fitting. These 17mm drip fittings are made with....
- Save money and time buying everything you need at once in this 20-Piece Set. Jumpstart your drip irrigation system installation with this set of....
- Easy and secure installation without glue, tools, or clamps. Simply push the tubing firmly over the barbs for a very tight fit that won't leak. If....
Check StockMale Branch Tee Push to Connect Air Line Fittings 1/4 Plastic Plug Tube OD x 1/8 NPT Thread Quick Release Connectors 3 Way Union Fitting Pack of 10
- Male Branch Tee Push to Connect Air Line Fittings 1/4" Tube OD x 1/8" NPT Thread Quick Release Connectors 3 Way Union Fitting.
- Type: Male Branch Tee 1/4" Tube Od x 1/8" NPT Thread Push to Connect Pneumatic Air Tube Fittings..
- High Quality Material: The connector made of high quality plastic and stainless steel.
- corrosion resistance, ductility, hundreds of tests, durable, no air leakage..
- Push-To-Connect Fittings: Maximum Pressure 0~145Psi.
- Components: Male branch tee fitting is used to branch line from female thread in both 90°directions. 360°rotation, after installation, the tube direction can be changed easily. Easy to insert or pull the trachea by hand without the aid of a tool..
Check StockBrass Compression Tube Fitting, Union Assortment Kits, 1/8\ 3/16\ 1/4\ 5/16\ 3/8\ OD (5pcs)
- Three piece construction - nut, sleeve and body with attached insert.Easy to disassemble no flaring tool required..
- Use with copper, brass, aluminum, or plastic tubing. -65 Degree F to +250 degree F temperature range. Standard fittings use short nuts..
- Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
- These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check StockElkay Everyday LK3001CR Deck Mount Kitchen Faucet with Remote Lever Handle and Side Spray, Chrome
- LEAD-FREE COMPLIANT: Certified to NSF/ANSI 61 and 372 to meet all federal and state regulations for low or no-lead products..
- LOW FLOW: Includes water-saving features..
- INCLUDES TWO AERATORS: Comes installed with 1.5 GPM water-saving aerator.
- optional 2.2 GPM aerator insert included..
- REMOVABLE CARTRIDGE: Allows for easy repair and replacement of cartridge..
- QUICK CONNECT SIDE SPRAY FITTINGS: Easier installation fittings that snap together in seconds.
- FULLY ROTATING SPOUT: Spout rotates a full 360 degrees.
- perfect for use in kitchen islands and bar/prep sinks..
Check StockTailonz Pneumaitc 1/4 inch NPT 12V/24V/110V/220V Way Normally Closed Electric Solenoid Air Valve 2V025-08
- 【Model】2V025-08 Solenoid Valves(2 Way Normally Closed ).
- 【Size】DC24V/1/4''NPT(Please air in the direction of the arrow above the product).
- 【Temperature Range/Pressure Range】 0-140°F.
- 【Feature】2v025-08 has high precision pilot head, up to 5 times/second response speed, suitable for a wide range of, responsive, smooth work, high-speed use without jam..
- 【About Fittings】In each product, we provide 1/4 Push to connect fittings, you don't need to buy again, just insert 1/4 "or 6mm tubes..
Check StockE-Track Motorcycle Wheel Chock | Upright Hold Bike Tire Wedge for Garages and Trailers - E-Track and Bolt-Down
- ...W HOW MUCH your bike means to you. And we want to make it easier to enjoy it! A motorcycle wheel chock HELPS KEEP YOUR BIKE SNUG in your trailer with UPRIGHT HOLD. It’s also THE IDEAL ACCESSORY for your garage, allowing motorcycles to STAND SAFELY on their own while you tinker with them..
- 003e EASY INSTALL E-TRACK FITTINGS! OTHER wheel chocks require bolts, nuts, measuring tape, and sweat. This Secure & Stable Upright Hold IS PORTABLE AND EXCEEDINGLY SIMPLE – just clip the spring fittings and insert them into E-track rail slots – no hardware necessary! (It’s worth mounting E-tracks just for the LIFELONG ASSURANCE you get from these wheel chocks.) YOU CAN ALSO remove the fittings and bolt down to the floor - 3/8” socket wrench and screws required, not included..
- 003e ADAPT YOUR TRAILER TO ACCOMMODATE YOUR BIKES EASILY without damaging interior walls or ruining your fenders! This WELL-BUILT 1-PIECE Upright Hold E-Track Wheel Chock works perfectly to STABILIZE various kinds of cycles. It’s CONVENIENT AND EASY TO USE AND move around where needed. *NOTE: You’ll still need tie-down straps to secure your motorcycle for transportation on the road.*.
- 003e THIS HEAVY DUTY POWDER COATED STEEL tire wedge chock rises 6"-11" above the plate with E-....
Check StockKalolary 150 Pieces 1/4’’ Straight Barbed Connectors Fitting Drip Irrigation Fitting Drip Irrigation Barbed Coupling Single Barbed Connector for Irrigation Tubing System and Garden
- 【Package Includes】150 pieces of 1/4 inch irrigation straight coupling connectors are included in 1 set. Sufficient quantity to use or take as backup,they are practical fittings for tubing..
- 【Fits 1/4 inch irrigation hose】This barbed coupling fittings connect two sections of any brand 1/4" drip irrigation tubing in a straight line. Two barbed ends makes the connection more strong and firm. Note:Please check the size carefully before purchasing..
- 【Long-lasting】Made of high quality engineering plastics, durable, strong, water resistant, chemical-resistant materials to assure long life..
- 【Easy to Insatll】Directly insert this irrigation coupling at the ends of the water pipe, there is no need of any glue or tools, making garden work more convenient and much easier. Tips: Heat the end of hose to help it slide on this coupling..
- 【Wide range of applications:】This coupling fittings for 1/4 inch irrigation tubing helps to build a maintenance-free irrigation system, it is ideal to be applied for garden, greenhouse, flower bed, patio and other agricultural watering system..
Check StockPATIKIL 2mm Tube Brass Compression Fittings 15 Pack Insert Tube Support Compression Sleeve Fitting
- Total Size: 4mm x 10.5mm / 0.16" x 0.41"(OD*H).
- Package List: 15 x Brass Compression Fittings.
- Advantage: Made of brass material, which is corrosion resistant, high pressure resistant, durable and has a long service life..
- Instruction: This insert sleeve can be connected to copper, brass, aluminum, or plastic tubing. No flaring tool is required for assembly..
- Application: The insert sleeve is commonly used to connect lines for air, water, oil in a quick and simple way..
- NOTE: Please confirm the size before purchasing it!.
Check StockAQUA CREST 5 Years Capacity - Inline Water Filter for Refrigerator with 1/4-Inch Direct Connect Fittings, Idea for Ice Maker, Refrigerator, Under Sink Reverse Osmosis System
- ...ffee Makers, Drinking Water Fountains, Water Coolers, Beverage Equipment, Sink Faucets, RV, Campers, Boats and RO System. Compatible with most refrigerator filter brands such as Samsung, GE, LG, Whirlpool, Frigidaire, and so on..
- : The in line water line filter comes with both 1/4” compression and push-to-connect fittings for plastic or copper water lines. You can install the filter with a single twist, without cutting the tubing. : Please insert the PE tube into the filter cartridge for 20mm, which can prevent water leakage effectively..
- - : This inline water filter for refrigerator has a service life of 5 years or 5,000 gallons( This may vary based on water conditions). By spending an average of 0.01 per day, you can enjoy great-tasting water for a long time. Less expense, better filtration..
- : In line water line filter employs a polyester membrane with a fine pore diameter and a 0.5 micron coconut shell activated carbon block, can effectively reduce fluoride, chlorine, taste and odor, rust, suspended solids, and colloids. It improves the taste of water from your refrigerator dispenser. BPA-free and lead-free material ensures product safety. Note: This system will NOT reduce Total Dissolved Solids (TDS)..
- - : 1/4” PE tubing, 1/4” compressi....
Check StockZZHXSM Plastic 10 Pcs Standard Couplers Cake Decorating Pipe Tip Couplers for Icing Nozzles, White
- Packing: 10 cake decoration couplers, enough to meet different purposes, you can change the test tube of similar size without emptying the contents in the decoration bag.
- Standard fittings: These white fittings are 3 cm / 1.2 inches long and have a base diameter of 2.5 cm / 1 inch, suitable for standard size icing nozzles.
- Available range: The standard coupler is suitable for all decorative bags and standard size tips, which can help you replace pipe tips without unnecessary waste.
- Simple and easy to use: cut a small hole in the corner of the bag, insert the plastic coupler, and then fix the suction head and screws on the ring. After completion, remove the tip and coupler and clean them.
- Durable and practical: The tube head connector is made of high-quality plastic and has a sturdy structure that allows you to decorate cakes and biscuits quickly and easily.
Check StockOnesnt E-Track Steel J Hooks Tie Down for X-Track Systems Tie Down Anchor Points Enclosed Trailers, Use as Hanger, Shelf Bracket, Support Beams, Trailer, Truck, Pickup, Cargo Van(Pack of 4 Black)
- 1.DURABLE SQUARE ETRACK J HOOK TRUCK & TRAILER HANGER TIE-DOWN ACCESSORY WITH SPRING FITTINGS.
- each hook has a safe assembly strength of 1,200 pounds..
- 2.THESE HOOKS ARE ONLY FOR E track rails and singles (NOT INCLUDED, available separately) and are also compatible with the E track enclosed trailer accessories cargo tie down system.
- 3.These Etrack tie-down hooks have easy THREE SECOND installation - just press the levers on the E track fittings and insert into standard 2.5" x 1" slots on any vertical or horizontal E TRACK trailer tie-down rails or singles..
- 4.LAST IMAGE includes a detailed mechanical sketch. These J-hook E-track tiedowns have a 4" high back rod and a 1.75" front rod with a 2 inch wide inner clearance to hang all trailer accessories.
- (Pack of 4) 2inch E-Track Heavy Duty J Hook Fittings - No Track Included.
Check StockGrease Injector Needle
- Easily grease sealed bearings Insert needle under or through rubber cover to apply grease to bearings.
- Snaps directly onto a jaw type coupler to reach grease fittings in very tight spaces.
- Works best with the LockNLube Grease Coupler.
- 18 gauge steel with protective plastic cover For hand-operated grease guns.
Check Stock