Top Insert Shank

CNC Spoilboard Surfacing Router Bit 1/2 Shank 1-1/2” Dia 2+2 Carbide Inserts Slab Flattening Router bit Cutter Planing Bit Woodworking Milling Cutter

  • SIZE: The wood router bit shank 12.7mm(1/2").
  • Carbide Inserts: above part 14*14*2 mm(≈ 5/9*5/9*2/25"), 2+2 Insert Design.
  • Professional Spoilboard Surfacing Router Bit,not only can it be used for wood slab flattening.It can also be used for slotting/grooving..
  • UPGRADE:Compared with ordinary milling cutters, this cutter can be replaced with carbide insert.This is more suitable for professional woodworkers..
  • Surface bit cutting applications of Industrial Spoilboard, Rabbeting, Flycutter, Leveler, Surface Planer and Bed Insert Router include spoilboard, large surface planing and trapping on MDF, Balsa Core, hardwood, softwood and all artificial materials.
  • This professional 2+2 wood milling cutter 1/2" Shank Has better bottom clearing effect,finer surface finish and better clearance for 90° angles..
Check Stock

OSCARBIDE 1/2\Indexable Grooving Parting Holder QA08R-20 Heavy Duty Nickel Plated Right -Hand Lathe Cut Off Tool with Carbide Insert GTN-2, 1 Piece

  • Size:Shank Size (B x H): 1/2" x 1/2" Overall Length (L): 4.5".
  • GTN-2 insert stop assures accuracy of center height and precise depth of cut.
  • Simple set-up with one piece integral shank holder adapts easily to any machine type and turret configuration.
  • Opening of wide grooves by plunging and side turning,wedge clamping of insert provides superior stability in close quarters face grooving cuts.
  • For external parting & grooving, profile/copy turning.
Check Stock

Dremel 9904 Tungsten Carbide Cutter

  • Use on Hardened steel, fired ceramics and other hard materials.
  • Do not use for drilling or enlarging holes less than twice the diameter of the cutter to avoid carbide surface catching side of hole and breaking.
  • For best results insert bit in tool and back out slightly before tightening down to provide plenty of shank for the collect or chuck to hold the bit.
Check Stock

Weller WES51 Compatible Heat-Set Insert Installation Tips for M2, M2.5, M3, M4, and M5 Inserts Used for Connecting 3D Printed Parts.…

  • Designed and manufactured in the USA. The original long shank tip for the WES51/WESD51 iron. If you see others with these shapes not made by Virtjoule, they are copy cats. Longer shank than other tips allows you to reach deeper into 3D printed parts and tight corners to install heat-set inserts without touching your iron and melting the plastic..
  • Installation tip works better than soldering iron tip since conical tips can catch on the insert and accidentally pull the insert out while melting the plastic and ruining the part..
  • Tip sizes include M2, M2.5, M3, M4, and M5. M2.5 is a popular hole size for Raspberry Pi circuit boards. M3 is a popular size for Arduino circuit boards..
  • Compact tip cradle included to keep them together when they're not being used..
  • Wide size range gives you lots of flexibility to choose the right insert for your 3D printing project..
Check Stock

Arbor Mandrel for Drill 1/4 Shank 1/2 Threads Arbor Adapter for Buffing Polishing Wheel 2pcs

  • 【Good Quality】This arbor mandrel with Integrated structure is stronger and durable, 2 large washers with dentation edge sandwich the wheels from....
  • 【Easy Install】1/4" adaptor shank insert into drill, the other side hold wheels which with 1/2" center hole..
  • 【Transformer】 Drill Arbor Adapter transforms your drill into a buffer / polisher..
  • 【Multifunction】This drill mandrel fit for most of drills with 1/4" shank, screw thread allows for install wheels thickness Up to 1-1/4"..
  • 【Dimension】 Overall Length: 2-3/8", Washer Diameter: 1-7/16", Shank Length: 7/8"..
Check Stock

CURT 45500 Forged Tow Hook Trailer Hitch Ball Mount, Fits 2-Inch Receiver

  • DEPENDABLE STRENGTH. This tow hook ball hitch is constructed from high-strength forged steel for maximum strength in recovery towing and straight-pull applications.
  • VERSATILE USE. This forged trailer hitch tow hook comes with a 2-inch x 2-inch shank to fit virtually any industry-standard 2-inch receiver.
  • READY TO TOW. Recovery towing is easy with this 2-inch tow hook mount. It can be used for pulling another vehicle, stumps and other offroad applications.
  • CORROSION-RESISTANT. For long-lasting use, this tow hook ball hitch is protected with a durable black powder coat finish, easily resisting damage from rain, dirt, snow, road salt and other corrosive threats.
  • EASY TO INSTALL. To install this tow hook hitch ball mount on your vehicle, simply insert the shank into your vehicle's 2-inch hitch receiver. The rounded shank makes installation easy. Then, secure the shank with a hitch pin (sold separately).
Check Stock

Shars 5/8 T Slot Indexable Cutting End Mill Cutter SCMT Insert 404-6612 P]

Check Stock

OSCARBIDE 1/2\ Indexable Lathe Grooving Parting Holder with 10 Pieces GTN-2(QC1402) Heavy Duty Nickel Plated QA08R-20 Right -Hand Cut Off Tool Carbide Inserts

  • Size:Shank Size (B x H): 1/2" x 1/2" Overall Length (L): 4.5".
  • GTN-2 insert stop assures accuracy of center height and precise depth of cut.
  • Simple set-up with one piece integral shank holder adapts easily to any machine type and turret configuration.
  • Opening of wide grooves by plunging and side turning,wedge clamping of insert provides superior stability in close quarters face grooving cuts.
  • For external parting & grooving, profile/copy turning.
Check Stock

SHARS 1/2 T Slot INDEXABLE Cutting END Mill Cutter CCMT Insert 404-6606 P]

Check Stock

SHARS 3/4\ T Slot INDEXABLE Cutting END Mill Cutter CCMT Insert 404-6608 P]

Check Stock

OSCARBIDE 3/8\x1/2\Indexable Grooving Parting Holder Nickel Plated Heavy Duty QA06R-20J Right -Hand Lathe Cut Off Tool with GTN-2 Carbide Insert, 1pcs

  • Size:Shank Size (B x H): 1/2"X3/8: Overall Length (L):3.5".
  • GTN-2 insert stop assures accuracy of center height and precise depth of cut.
  • Simple set-up with one piece integral shank holder adapts easily to any machine type and turret configuration.
  • Opening of wide grooves by plunging and side turning,wedge clamping of insert provides superior stability in close quarters face grooving cuts.
  • For external parting & grooving, profile/copy turning.
Check Stock

ASZLBYM 3/8\ Lathe Threading Turning Tool Holder SER1010H11 with Indexable Carbide Threading Turning Insert 11ER A60 (3/8\ Holder + 11ER A60 Insert)

  • PACKAGE INCLUDES : You will receive 1 pieces SER1010H11 3/8”/10mm shank diameter lathe turning tool holder , 11pcs 11ER A60 threading carbide turning inserts and 1pc T8 wrench..
  • Material : The SER1010H11 3/8” metal lathe cutting tool holder material is 40Cr steel, it has the characteristics of durability, sturdiness and stability, and good anti-rust performance. The 11ER A60 threading turning inserts material is carbide, and the coating is Nanostructured TIAIN, It has good toughness, wear resistance and high temperature resistance, the carbide insert can uesd for processing steel..
  • Turning tool holder size : Shank Diameter ( length×width ) : 3/8"*3/8"(10mm*10mm).
  • Threading carbide turning insert :Processing : 60°general thread insert, processing pitch range: 0.5mm - 1.5mm..
  • Easy to store: the metal lathe cutting turning tool holder and threading carbide turning inserts are packed in a plastic container, safe and easy to store, please rest assured to buy!.
Check Stock