Top Inspection Plate

Slendor Magnetic Stirrer SH-2 Hot Plate Mixer Max 520℉ Lab Hotplate Stirrer 2000 RPM Stir Plate with Thermometer, Stirrer Bar and Support Stand

  • Adjustable Stirring Speed -- There is a speed regulating device at the bottom of the SH-2 magnetic stirrer hot plate. Rotate clockwise to increase the stirring speed, and counterclockwise to decrease. Adjust as needed. The max stirring speed is up to 2000RPM..
  • Rapid Heating -- Heating Power: 180W, Max Temp: 520°F. The magnetic hotplate stirre can stirrer and heat at the same time. Included 1 inch Teflon coated magnetic stirrer bar and thermometer, which can be used to display the temperature during use..
  • Advanced Material -- The magnetic stir plate is made of advanced materials, resistant to high temperature, abrasion, and chemical corrosion. Each stir hot plate stirrer has been tested and inspected, and the quality is guaranteed..
  • Widely Used -- The magnetic heated plate is suitable for scientific research institutions, industry, agriculture, laboratories and universities. Tips: work continuously for 4 hours in high-speed state and 8 hours in medium-speed state..
  • Quality Assurance -- The professional magnetic hotplate stirrer has undergone strict quality inspection and can operate stably for long time. If you have any questions about the lab hot plate, please contact the seller customer service at any time..
Check Stock

Bolaxin Flywheel Locking Tool with 36mm 3/4 Inch Wench for 6.6L Duramax Engine

  • Locks Flywheel in Place When Removing Harmonic Balancer on 6.6L Duramax Engines with Allison Automatic Transmissions.
  • Saves time by locking the flywheel at the transmission instead of having to remove the starter for water pump replacement.
  • Use 36mm 12-point socket with 3/4 square drive to remove harmonic balancer bolt and retorque on installation.
  • Duramax 2500 / 3500 Pickups – Use toothed pieces only removes metal spring-loaded inspection plate on the bottom of the transmission. Tool should slide into opening toward engine with the top of the tool engaging the teeth of the flywheel..
  • Duramax 4500 / 5500 Trucks -- Use toothed pieces with screws remove the rubber inspection cap on the bottom of the transmission. Insert the tool at the front of the opening to engage the flywheel and hand tighten bolt to hold tool in place..
Check Stock

12.5'' Microwave Glass Plate Turntable Replacement 12 1/2" With 3 Part Bushing Couplers Centerpieces, Round Rotating Dish Tray for Microwaves

  • Diameter: 12.5 inch, with 3 Part Bushing Couplers Centerpieces.
  • Works for Brands: GE / G.E. (TM), Samsung (TM) and Hotpoint (TM) models requiring 12.5-inch diameter glass plates with 3-part bushing couplers / centerpieces.
  • Check for Size: 1. Check your bushing coupler (the centerpiece that turns the plate) ensure it has three notches – these should align w/ the middle of the plate. 2. Measure the microwave interior to ensure that it will fit a 12.5″ plate.
  • PREMIUM QUALITY: The replacement part is made from high quality material for long lasting..
  • GUARANTEE: Discount Parts Direct is a US based company, from molding, stamping to assembly, inspection of each process has strict quality requirements and hand check. We offer customer 100% Money Back Guarantee. We appreciate your business.
Check Stock

iBetter 2 PCS Thick Carbon Fiber License Plate Frames, Car Licence Plate Holder Covers with Bolts, Washers and Screw Caps for US Standard (2 Holes Wide Carbon Fiber)

  • ...tional hardware. The stainless steel license plate screw are suitable for the license plate mount of most models. The carbon license plate screw caps perfectly decorate the carbon fiber frame. GIFT-The aluminum Tire Valve Caps easy to stick to your tire valve nozzle.Please be sure to unscrew the Tire Valve Caps for inspection within 1-2 months to avoid losses!.
  • License Plate Rust Proof /Rattle Proof- The frame is made of high-quality aluminum, the screws bolts and fastener nuts are made of stainless steel. They are anti corrosion and anti rust, and can well protect the license plate. The black foam rattle proof license plate pads are pasted on the back of the plate to reduce vibration noise and avoid scratching the paint of the car, so that your car is always clean, novel and cool. The black tire valve cap are good car accessories.
  • Note: The width of the upper and bottom edges is 28mm. Please measure your license plate to check whether the frame edges will obscure your plate tags, if your plate is for the following states: Alabama, Colorado, Georgia, Hawaii, Idaho, Kentucky , Minnesota, Nevada, North Dakota, New York, New Mexico, New Jersey, New Hampshire, Ohio, Oklahoma, Oregon, South Carolina, Wisconsin. If the screw size does not fit your car, pleas....
Check Stock

Five Oceans FO296 Marine Round Inspection Screw-in Deck Plate, 4 inches, Anti-Aging, Anti-Corrosive and UV-Resistant ABS Plastic, White

  • This FIVE OCEANS Marine Round Inspection 4 inches screw-in deck plate is made of anti-aging, anti-corrosive and UV-resistant ABS plastic with smooth finish..
  • Deck Plate is leak-proof. SCREW-IN style has a single-start, non-jamming (no cross-threading). Separate cover plate and chassis for easy installation. Screws not included..
  • It is designed with a rubber O-ring that creates a watertight seal for safety and allows to be used for interior and exterior applications. It includes a safety lanyard to secure the lid cover..
  • OUTSIDE Diameter is 5-5/8 inches (143mm), INSIDE Diameter is 4 inches (102mm) and CUTOUT is 4-7/16 inches (113mm)..
  • Use silicone sealant on the hull or deck surface when installing the deck plate.. FIVE OCEANS, 40 YEARS developing High-Quality Marine & Outdoor Products.
Check Stock

BGMVFK Carbon Fiber License Plate Frame- 2 Pack Black Aluminum Front & Rear Auto Car Tag Holder Cover, Heavy Duty Bracket with Mount Hardware, Stainless Steel Screws, Caps, Rattle Proof Pads

  • ...tional hardware. The stainless steel license plate screw are suitable for the license plate mount of most models. The carbon license plate screw caps perfectly decorate the carbon fiber frame. GIFT-The aluminum Tire Valve Caps easy to stick to your tire valve nozzle.Please be sure to unscrew the Tire Valve Caps for inspection within 1-2 months to avoid losses!.
  • License Plate Rust Proof /Rattle Proof- The frame is made of high-quality aluminum, the screws bolts and fastener nuts are made of stainless steel. They are anti corrosion and anti rust, and can well protect the license plate. The black foam rattle proof license plate pads are pasted on the back of the plate to reduce vibration noise and avoid scratching the paint of the car, so that your car is always clean, novel and cool. The black tire valve cap are good car accessories.
  • Note: The width of the upper and bottom edges is 28mm. Please measure your license plate to check whether the frame edges will obscure your plate tags, if your plate is for the following states: Alabama, Colorado, Georgia, Hawaii, Idaho, Kentucky , Minnesota, Nevada, North Dakota, New York, New Mexico, New Jersey, New Hampshire, Ohio, Oklahoma, Oregon, South Carolina, Wisconsin. If the screw size does not fit your car, pleas....
Check Stock

Lisle 22110 Flywheel Lock

  • Locks flywheel in place when removing harmonic balancer on 6.6L Duramax Engines with Allison automatic transmissions.
  • Saves time by locking the flywheel at the transmission instead of having to remove the starter for water pump replacement.
  • On 2500 and 3500 pickups, remove metal spring-loaded inspection plate on the bottom of the transmission.
  • For more information check the main Lisle tool- 22100.
Check Stock

HHIP 4401-1597 6\ X 8\ X 2\ Granite Surface Plate, Grade B, 0 Ledge

  • Surface plates are checked by an auto-collimator for overall accuracy assurance.
  • Granite surface plates meet or exceed Federal Specifications GGG-P-463C.
Check Stock

HHIP 4401-1596 6\ X 6\ X 2\ Granite Surface Plate, Grade B, 0 Ledge

  • Surface plates are checked by an auto-collimator for overall accuracy assurance.
  • Granite surface plates meet or exceed Federal Specifications GGG-P-463C.
Check Stock

Lightening Corp Baby Plate Silicone Toddler Plates Suction Placemat Divided Dishes for Kids and Infants One-Piece Strong Suction, BPA Free, Microwave Dishwasher Safe (Grey)

  • ...ing a mess on the floor or dropping their plates.
  • Durable - Silicone does not warp or damage and can withstand both hot and cold temperatures. It is also resistant to age, sunlight, moisture and chemicals.
  • Warning - It is normal for silicone products to contain odors. Our products are safe and non-toxic after quality inspection. Expose the plate to the air for 2-3 days and the smell will naturally dissipate.
Check Stock

SEA FLO 4\ - 8\ White Circular Non Slip Inspection Hatch w/Detachable Cover (8\)

  • 4''Marine Screw Out Deck Plate Inspection Hatch Plastic Access Boat.
  • Strong ABS Molded Design, Anti-Aging, Anti-Corrosive, Ultraviolet Resistant.
  • Inside Diameter: 4"(101mm).Outside Diameter: 5.6"(143mm).
  • Durable Water-Tight O-Ring.Reinforced design with a non-slip surface.
  • Easy to install, Pre-drilled countersunk holes (screws not included).
Check Stock

Spot Weld Cutter Set Double Sided 14 Pcs,3/8" HSS Spot Weld Cutter Remover Drill Bits Hex Sheet Metal Hole Cutter Remover Kit for Power Drill Spot Welding, by NAKAO

  • ...e.with a flat shank to eliminate rotation in the chuck..
  • ◆【Easy separation】 The spot welding cutting machine drill bit can easily separate the spot welding plate without distorting the metal plate. Separate spot welding of sheet metal, panels, etc., and cut out small inspection holes. Also known as: spot weld drill bit, spot weld bit, spot weld cutter drill bit, spot weld drill cutter, spotweld drill bits, spot weld cutter, Rotary Spot Weld Cutter Sets Double Sided, Power Drill Spot Welding.
  • ◆【Package Include】：1 x Drill with Cutter,2 x Pilot Pin.,11 x Extra 3/8" cutters. Also known as: Remover Drill Bits Hex Sheet Metal Hole Cutter Remover, Punch Remover Panel Separator, Spot Weld Cutter Set, 3/8" Rotary Spot Weld Cutter Remover Drill Bits Tool, Metal Hole Cutter Remover.
  • ◆Providing high quality and professional parts with great service.if you have any questions, please feel free to contact us by email for more information!We will solve it for you in the first time!.
Check Stock