Top Insulated Copper Pipe

Jienk HDMI Solderless Male Quick Connector, Port Terminal Solderfree Breakout Connector Board with Case Accessories(2 Pack)

  • WIDELY APPLICATIONS:Mainly used in plasma TV, HD player, LCD TV, rear projection TV, projector, DVD recorder/player, D-VHS recording/player and digital audio and video display device for video and audio signal transmission..
  • DURABLE: Copper cored gold-plated joints are used for durability, plugging resistance and good contact, clearer picture quality. It adopts all-copper environmental protection copper terminal, which has good transmission and allows current of 10A..
  • RELIABLE: Each product is equipped with a nail clips, 5mm, 7mm, 9mm, 10mm 4 different sizes of tail pipe. Make sure that the cable is pulled in use without causing dropped wires or poor contact..
  • No Soldering Required. Adopt environmentally friendly insulated terminal block. Just use a small screwdriver to open up the terminal blocks, slide in your stranded or solid-core wire, and re-tighten..
  • All the pins are clearly labeled. NOTE:The wiring diaphragm is for reference ONLY！Hdmi cable has different color coding,multimeter to tone out the wires that you own before purchase or feel free to contact us..
Check Stock

SSPIN300 Swaging Tool Drill Bit Set with 1/4” 3/8” 1/2” 5/8” 3/4” 7/8” Bits

  • ✅MADE OF HIGH QUALITY MATERIAL: This expander tool is made of heavy duty stainless steel, solid and sturdy, durable and will last for long time,.
  • ✅SPECIFICATION: Copper Pipe Tube Expander it can be use to expand copper pipe with diameter 6mm, 8mm, 10mm, 12mm, 16mm, 19mm, 22mm (1/4″ 5/16″ 3/8″ 1/2″ 5/8″ 3/4″ 7/8″) ..
  • ✅ERGONOMICS DESIGN: Hand Refrigeration Tools with Hinge design, which can avoid swing of handle, ensuring stable operation. The rubber will make your feel soft and comfortable to use..
  • ✅STRONG AND DURABLE SPRING: The spring is strong and durable, you don’t need to press the handle very hard when expanding the tube, makes your job easier and productive..
  • ✅APPLICATIONS: This hand copper pipe expanding tool can be widely used for expanding your pipe to fit your certain desired size when you repair HVAC, refrigerator or other copper pipe projects.
Check Stock

Stampede Stills 20oz Copper Half Gallon Widemouth Mason Jar Thumper Kit

  • Made from 20 ounce copper sheet, silver based lead-free solder, gasket, and is 1/2" copper pipe. The inlet pipe has an elbow to prevent hot spots on....
  • 1/2" copper pipe stubbed out for easy plumbing to your existing still. Additional pipe/coupling/unions to connect to your setup are NOT included as....
  • Works on 1/2 gallon canning Mason jars with standard wide mouth lids..
  • Works on widemouth mason jars (setup requires prior ownership of 1/2 galllon jar and band to work).
Check Stock

TOLESA Pipe Cutter Tool 3/16-2 Inch 5-50mm Heavy Duty Metal Pipe Cutter With Deburring Tool Pipe Reamer Sharp Copper Tube Cutter Speed Cutting Tubing Cutter For Stainless Steel Aluminum Brass Pipe

  • 【Precision Cutting】 - The 2 inch metal pipe cutter tool is equipped with sharp SKD cutter wheels and 6 high-density ball bearing rollers to ensure a firm grip on pipe during tube cutting process, especially for various metal, stainless steel, copper pipes and tubes. It saves you from the trouble of uneven cutting surface due to unstable clamping..
  • 【Heavy Duty】 - The copper pipe cutter is made of high-density but lightweight aluminum alloy, which is durable and compact. Copper tubing cutter can ensure your cutting work is smooth and will not break after many cuts, and has a longer service life. And the aluminum alloy body makes the conduit cutter more suitable for cutting high-density metal materials..
  • 【Clean Cutting】 - The stainless steel pipe cutter with 6 ball bearings provides you with smooth cutting and improved cutting efficiency. However, some small burrs on the edges are inevitable in the process of cutting tube. That's why our aluminum pipe cutter is equipped with a deburring tool pipe reamer, which consists of a sturdy plastic construction and a high-speed steel blade. It can ream the inside and outside of the cut to prevent scratching..
  • 【Ease Of Use】 - The bottom of the brass pipe cutter is equipped with a knob, which is comfor....
Check Stock

WADEO HVAC Repairing Tools, Air Conditioner Copper Tube Swaging Tool with Expander Drill Bit, Copper Pipe Cutter and Deburring Tool for Copper, Aluminum and Thin Stainless Steel Tube

  • Drill Bits: Made of durable and wear-resistant bearing steel, it is not easy to break, When the air conditioner is installed, These drill bits can expand the copper pipe, so you can link the two copper pipes to each other..
  • Mini Copper Pipe Tubing Cutter(1/8" - 1 1/8"): It can cut copper tube, steel pipe, stainless steel tubing, aluminium piping PVC and iron. But we do not recommend cutting PVC pipe as it’s a lot more difficult to cut..
  • Deburring Tool: With ergonomic handle for secure grip, the blade is mounted on the handle can be rotated 360 degrees, this tool helps to clean the top of the pipe or tube and it has a compact size which is easy to be carried to anywhere.(The blade is hidden in the pen holder).
  • Drill Bits Size: 1/4'', 3/8'', 1/2'', 5/8'', 3/4'', 7/8''.
  • Package Include: 3-28mm（1/8"-1-1/8"）Tube or Pipe Cutter*1.
Check Stock

Stampede Stills Copper Quart Widemouth Mason Jar Thumper Kit with Quart Jar Sleeve

  • Made from 20 ounce copper sheet, silver based lead-free solder, gasket, and is 1/2" copper pipe. The inlet pipe has an elbow to prevent hot spots on....
  • 1/2" copper pipe stubbed out for easy plumbing to your existing still. Additional pipe/coupling/unions to connect to your setup are NOT included as....
  • The Stampede Stills Quart jar insulator is great for all drinking occasions and works well to insulate the jar during use..
  • Works on widemouth mason jars (setup requires prior ownership of quart jar and band to work).
Check Stock

Libraton Tube Cutter, Mini Tubing Cutter, Heavy-duty Pipe Cutter with Deburring Tool for Copper Pipe, Aluminum Pipe, Thin Stainless Steel Pipe

  • [High-quality Blade] Libraton pipe cutter blade is made form aluminum alloy, wear-resistant. It will never get rust..
  • [Wide Application] The copper tube cutter can be used to cut copper pipe, aluminum pipe and thin stainless steel tube..
  • [Mini Cutter] The mini tube cutter is specially designed for small diameter tubes in restricted spaces, and is perfect for working in tight and confined spaces, such as air conditioner installation and vehicle repair..
  • [Copper Tube Cutter] Solid ergonomic PVC knob is designed on the bottom of the copper cutter, providing the stability when using the cutter and improving the cutting efficiency..
  • [Usable Attachment] There is a deburring tool attached with the pipe cutter tool, made of sturdy plastic construction and high-speed steel baldes. It can deliver quick, clean and easy inside diameter reaming of different tubes (e.g. copper, aluminum, PVC and stainless steel tubes).
Check Stock

[5 in 1]Swaging Tool Copper Tube Expander Manual Copper Pipe Swage Too Expander Drill Bit Soft Copper tubing Tool bit with for HVAC Repairing Air Conditioner

  • Material:This Manual tube expander is bearing steel material, blackened surface treatment process to prevent pipe drill bit rusting..
  • Contains: 6pcs hexagonal handle tube expander + 5pcs bell mouth expander,Air Conditioner Copper Tube Expander Tool Drill Sets.
  • Specifications: 7/8 (22.2mm), 3/4 (19mm), 5/8 (15.9mm), 1/2 (12.7mm), 3/8 (9.5mm), 1/4 (6.3mm).
  • Function: When the air conditioner is installed, expand the copper pipe to make the two copper pipes interconnected. (It needs to be installed on a hand electric drill).
  • Operation method: according to the expanding pipe diameter, select the corresponding expanding head and install it. In order to prevent the edge of the pipe from cracking, the tip of the expanding head should be used to expand the pipe. Then insert the whole expanding head into the copper tube and apply force evenly until the cup mouth is formed..
Check Stock

AMZCNC Compact Bender Kit with Reverse Bending Attachment for 1/4 - 7/8 Tube and Pipe Bending Premium Ratcheting Tube Bender

  • 【High quality material】: The main body of the tube bender of The copper tube bending tool kit is made of stainless steel, which is pressure....
  • 【Wide range of application】: This pipe bender tool kit is suitable for pipe benders of 1/4"-7/8", applicable pipe materials: copper pipe, aluminum....
  • 【Easy to install】: The pipe bender is easy to install, easy to assemble and operate, and easy to get started. Support pipe diameter: 1/4.
  • 【Ergonomic design】: CT-999 pipe bender conforms to ergonomic design. The kit is made of 304 stainless steel, steel fiber, iron and other....
  • 【Complete accessories】: The pipe bender kit has a variety of tools to meet different needs. The kit includes 1 x Bender, 7 x Fiber Wheel, 1 x Pipe....
Check Stock

DELIXI Copper Pipe Cutter, 1/8 to 1-1/8 inch Tube Cutting Tool, Reliable Metal PVC Tubing Cutter with Reamer

  • 【Precise and Clean Cut】: Using high-strength alloy steel as main material, this tube cutter performs well in precise cutting. The thickness of the pipe should not exceed 1/10 inch (3mm)..
  • 【Replaceable Blade】: The blade of this copper pipe cutter is replaceable. When the blade becomes dull, please replace the blade with a Phillips screwdriver. When replacing a blade for the first time, pry open the bottom knob to get out the new blade..
  • 【Practical Reamer】: There is a deburring tool on the side of the copper pipe cutter, so you don’t need to bring another reamer when cutting pipes. When the deburring work is done, it can be pushed back in..
  • 【Flexible Adjustment】: The advance and retraction of the scroll structure are both smooth, making the pipe cutting work more efficient. The ergonomic handle design helps to cut quickly and effortlessly..
  • 【Wide Application】: The pipe materials this tubing cutter can cope with are as follows: copper, pvc, aluminum, stainless steel, iron, KBG. Pipe diameter limit 1/8 to 1-1/8 inch（3-28mm）..
Check Stock

Inavis Self Fusing Silicone Tape 1

  • Super quality -(100% silicone tape) This self-fusing tape is non-toxic, odorless, resistant to weather/abrasion/high temperature because its made from silicone rubber..
  • Insulated Feature - (Up to 8000 volts)The tape is insulated so its mainly used for the insulation of electric cable..
  • Tensile Strength-(750-900 PSI) Flexible, Stretchable and conforms even to small pipe diameters, tight corners.
  • Wide Temperature range - From -60(50)to 500(260). This tape also performs well in anti-aging, oxidation resistant and impact resistant aspects..
  • Waterproof Feature - This silicone tape can be used for the sealing and leaking stoppage of water pipe, pipeline and PVC pipe due to its waterproof and strong adhesive feature..
Check Stock

Loreso Mini Copper Pipe Tubing Cutter - Mini Tube Cutter for Copper Brass Aluminum, Thin Stainless Steel for 1/8 to 1 1/8 (3-28mm) OD Pipes)

  • MINI TUBING AND PIPE CUTTER – Manufactured with high-quality, heavy duty alloy steel, this tube cutter will efficiently cut copper, brass, aluminum and thin steel pipes. This pipe cutter provides a fast, economical way to do a clean cut..
  • VERSATILE PIPE CUTTER FOR ALL INDUSTRIES – This copper pipe cutter is suitable for use on construction sites, HVAC and refrigeration, plumbing jobs, manufacturing, heating, decorating or even at garage repair shops.
  • EASY TO OPERATE – Cut like a BOSS with Loreso manual pipe cutter, Rotate the knob to grip tube, Revolve tube cutter around the pipe, Tighten grip smoothly after each full circle until full cut..
  • VARIOUS TUBE CUTS – Cut Copper, Brass, Aluminum, Thin Steel and PVC Pipes with 1/8 to 1 1/8 Inch ( 3-28mm ) Outer Diameter OD..
  • STURDY ALUMINUM CAST FRAME – Tube Cutter body is made of light weight and durable Aluminum Casting, Blade is built using CNC machining with most durable and high quality Alloy Steel..
Check Stock