Top Insulation For Asphalt Shingle Roofs

HEATIT HIRD 30 feet 5 Watts Per Foot Roof & Gutter Snow De-Icing Cable

  • Tough XLPE as inner insulation and weather resistant PVC (high-low temperature) as out jacket. 100% screen rate with the Aluminum foil and tinned....
  • Both CSA and ETL approved. 6 ft 18/3 cold lead with plug . Pre-assembled, ready to install, no maintenance required. Easy instruction manual, clips....
  • Designed to prevent ice build up, known as ice dams, from forming on roofs and in gutters and downspouts. Protect your roof from damage and leaking,....
  • Used for Metal or plastic gutters/downspouts, Inclined roofs Roofs with noncombustible shingles (Ex.: asphalt shingles) that meet national building....
  • Testing the cable before the installation.Uncoil the heat cable completely so it does not touch, cross over or overlap on itself. Do not plug in the....
Check Stock

Shingle Eater 6127

  • STRONG: The Shingle Eater 6127 has a 46.5” handle and 10 teeth. Its foot plate is flame-hardened and heat-tempered and contains a base plate that features stiffening corrugations..
  • WEIGHT: The Shingle Eater is made of light weight carbon steel pipe that provides a rugged yet balanced feel..
  • DURABLE: The 6127 is designed for steeper pitched roofs and the quality can be felt in the welding and finishing, including a yellow powder coated finish..
  • MADE IN THE USA: Shingle Eater has been making high-quality roofing tools since 1981 and are proudly built in the USA.
Check Stock

HEATIT JHSF1 Self Regulating Pre-Assembled Heating Cable 125-feet 120V Roof deicing and Pipe freeze Protection

  • ...n the ambient temperature at each point along the cable. No worry about the overheat risk. More Safe. Can be used by straight, spiral and overlap. More functional..
  • Protect pipes up to 2 1/2” in diameter. For a better freeze protection, at least 1/2 inch thick or thicker insulation material is recommended, especially for extremely cold weather. If the ambient temperature is lower than -20°F(-29°C), please use 1” thick insulation material. ETL approved. 50 degrees F for pipe freeze protection.3 ft 18/3 cold lead with grounded plug..
  • Roof deicing application: HEATIT JHSF1 was designed to prevent the ice dam formation not to melt the ice dams which were already formed. Please turn on the cable at the beginning of snowing. Can be used on flat roofs, metal roofs, asphalt roofs, rubber roofs, slate roofs, stone roofs, metal roofs, ceramic roofs, composite (tar and gravel) roofs and so on. Rated 10W/ft at 32°F (0°C) for roof deicing. For roof deicing application, you may need to buy clips and hangers separately..
  • Designed to maintain water temperature in the supply piping system, reducing or eliminating the delay in obtain....
Check Stock

Qualcraft 2571 Industries General Purpose Strip Fast Shingle Remover, 27-1/2 in H, Steel, Powder Coated

  • The strip fast shingle remover is the ideal tool for removing fiberglass or asphalt roof shingles.
  • The all steel contraction of the strip fast shingle remover guarantees the toughness needed to perform the application.
  • The strip fast shingle removers feature replaceable, serrated tempered Carbon stell blades and skid plates.
Check Stock

HEATIT HIRD 80 feet 5 Watts Per Foot Roof & Gutter Snow De-Icing Cable

  • Tough XLPE as inner insulation and weather resistant PVC (high-low temperature) as out jacket. 100% screen rate with the Aluminum foil and tinned copper braid. More safe and more healthy..
  • Both CSA and ETL approved. 6 ft 18/3 cold lead with plug . Pre-assembled, ready to install, no maintenance required. Easy instruction manual, clips and spacers are included..
  • Designed to prevent ice build up, known as ice dams, from forming on roofs and in gutters and downspouts. Protect your roof from damage and leaking, keep the water flowing in gutter & downspouts..
  • Used for Metal or plastic gutters/downspouts, Inclined roofs Roofs with noncombustible shingles (Ex.: asphalt shingles) that meet national building codes. Different lengths are available.
  • Suitable for most roof and gutter configurations..
  • Testing the cable before the installation.Uncoil the heat cable completely so it does not touch, cross over or overlap on itself. Do not plug in the cable until it has been completely uncoiled. Plug cable in, and in approximately 5 minutes, you should feel slightly warm to the touch. Then unplug the cable..
Check Stock

Heat it HIRD 20 feet Roof Gutter De-Icing Cable

  • ...able in, and in approximately few minutes, it should feel slightly warm to the touch. Then unplug the cable..
  • Both CSA and ETL approved. 6 ft 18/3 cold lead with plug.
  • 5 watts/ft. Pre-assembled, ready to install, no maintenance required.
  • Easy instruction manual, clips and spacers are included..
  • Tough XLPE as inner insulation and weather resistant PVC (high-low temperature) as out jacket. 100% screen rate with the Aluminum foil and tinned copper braid. More safe and more healthy. Three year limited warranty- If you are not completely satisfied with HEATIT heating cable, please don’t hesitate to contact us in any time..
Check Stock

HEATIT HIRD 200 feet 5 Watts Per Foot Roof & Gutter Snow De-Icing Cable

  • Tough XLPE as inner insulation and weather resistant PVC (high-low temperature) as out jacket. 100% screen rate with the Aluminum foil and tinned copper braid. More safe and more healthy. Three year limited warranty- If you are not completely satisfied with HEATIT heating cable, please don’t hesitate to contact us in any time..
  • Both CSA and ETL approved. 6 ft 18/3 cold lead with plug . Pre-assembled, ready to install, no maintenance required. Easy instruction manual, clips and spacers are included..
  • Designed to prevent ice build up, known as ice dams, from forming on roofs and in gutters and downspouts. Protect your roof from damage and leaking, keep the water flowing in gutter & downspouts..
  • Used for Metal or plastic gutters/downspouts, Inclined roofs Roofs with noncombustible shingles (Ex.: asphalt shingles) that meet national building codes. Different lengths are available.
  • Suitable for most roof and gutter configurations..
  • Testing the cable before the installation.Uncoil the heat cable completely so it does not touch, cross over or overlap on itself. Do not plug in the cable until it has been completely uncoiled. Plug cable in, and in approximately 5 minutes, you should feel slightly warm to the touch. Then unplug the cable..
Check Stock

Shingle Gauge 4/09, Roofing Tools and Equipment for Measuring Shingles Thickness, Roof Pitch Gauge and Roof Measuring Tool, Professional Tile Device for Roofer, Claim Adjuster, House Owner

  • 1【Easy to Use】4/09 shingle gauge is easy tools to measure the thickness of roof shingles, black digits writing on silver guage are very readable, it is a essential tool for roofers and insurance adjusters. Of course, it is great roofing tools for house owner to inspect roofs..
  • 2【Durable & Strong】This pitch gauge are 100% stainless steel, it is so sturdy and not easy to break or ruptured, you can freely use it in any roof works..
  • 3【Function】This Shingle gauge is a measuring tool for roof tiles, it is large enough to hold next to the shingle and take a photo showing the size of the shingle, it is simple and easy to use. On other side has a 5-inch ruler..
  • 4【Portable and Light-weighted】This high quality roof pitch measuring gauge is small size- ‎6 x 1.5 x 0.25 inches, and its weight only ‎3.52 ounces, it is extremely portable and can be taken as handy tools conveniently..
  • 5【Note】Please kindly note this shingle gauge only use for shingles manufactured January 2011 or before due to changes..
Check Stock

RoofZone Roof Ripper Shingle Remover with Steel Handle/Rubber Grip - Yellow, 47 1/2in. Model Number 13831

  • Designed to aggressively remove asphalt shingles, cedar shakes, and underlayments with ease.
  • Serrated tempered steel blades allow for efficient nail and shingle removal.
  • Serrated blade and skib plate are replaceable for longer tool life.
  • Available in two sizes making shingle removal easier at any roof pitch.
Check Stock

4/09 Shingle Gauge, Measuring Tool for Roof Shingle, Shingle Gauge with Carabiner Roofing Tools and Equipment for Measuring and Analyzeing the Thickness of Roof Tiles

  • 【Function】This shingle gauge measures the thickness of the tiles and can evaluate the relationship between tile thickness and warranty period. Designed with the tightest analytical tolerances..
  • 【Applicability】Roof gauge tool estimates the warranty level of asphalt composite shingles 3-tab fiberglass, 3-tab organics and laminated shingles..
  • 【Easy to Carry】The roof gauges pack comes with a hiking buckle that makes it very easy to carry when using it, and it has a 5-inch ruler on the other side..
  • 【Reliable Quality】The shingle gauge roofing is made of high quality stainless steel with a thickness of 3mm, high hardness, rust and corrosion resistance, and long applicable life..
  • 【Notes】This roof pitch gauge is for use only asphalt composition shingles installed prior to January 2011..
Check Stock

Extreme Max 5600.3262 Poly Roof Rake with 23 Blade

  • Angled blade offers more use in less space and is effective on low pitched roofs and two-story houses.
  • 6" x 23" blade provides superior snow removal.
  • Poly blade is perfect for any style slanted roof, including metal and shingle roofs.
  • Poly blade and lightweight aluminum handle make it easy to maneuver and protect against wear and tear.
  • Includes three 5' handle extension poles with easy snap-button handle assembly and disassembly.
Check Stock

50 ft Cable Self Regulating Heat Cable with 10 Pairs of Roof Clips and Leakproof Plug Gutter Heater Roof Snow Deicing Heating Cable for Ice Dam Protection Pipe Freeze Prevention, 120 V

  • ...ting roof snow melting cables will not short out or burn, and unlike constant power heating cables, our self regulating heat cables can be safely installed directly on metal roofs without overheating that could cause a fire, they never overheat, even when stacked on top of themselves.
  • Serviceable and Safe: the inner insulation of the deicing gutter heater is made of toughness modified polyolefin, and the outer sheath is made of weather resistant TPE, which is safer and healthier.
  • The self regulating temperature design of the roof snow melting heat cable automatically adjusts the heat output according to the ambient temperature conditions.
  • In cooler conditions, the heat output increases, and as the temperature increases, the output decreases to save energy.
  • Wide Applications: our roof snow deicing heat cable is applied to flat roofs, metal roofs, asphalt roofs, rubber roofs and more.
  • We also provide roof clips without nails for easy installation and prevent ice dams and create opportunities to drain melted snow from your home into gutters.
Check Stock