Top Insulation Pipe Fitting

2 in x 13 FT Pipe Insulation Tape - Sponge Rubber Foam Tape - Weather Resistant Water Pipe Wrap Tape - Foam Pipe Insulation - for Winter Water Line Winterizing Heat Preservation

  • 【EASY TO INSTALL】Our pipe insulation tape has a strong adhesive on the back. Just peel off the film backing and tie the tape around the outdoor plumbing. The tape will stick firmly to the pipe and will not come loose even after a long time. (2 Inches Wide, 1/8 Inches Thickness, 13 Feet Long).
  • 【MAXIMUM PIPE FREEZE PROTECTION】Match with our TOHONFOO Customized Design Backflow Preventer Cover to protect your Backflow Preventer in cold winter or hot summer Perfectly..
  • 【Avoid High Repair Costs】Protects your pipe from freezing, bursting, and blowouts due to severe weather conditions like snow, rain, wind, and sun exposure heating. Avoid the expensive costs of pipe replacement and repair every year..
  • 【PROTECT YOUR PIPES】Our thermal insulation freezer tape has the advantages of good waterproofing, weather resistance, and so on. Especially suitable for protecting outdoor pipes from freezing in winter, or damage from the scorching sun in summer..
  • 【DURABILITY INSULATION TAPE】You are guaranteed optimum durability every time you choose our seal tape for your insulation.....
Check Stock

GIANNEER Disconnect Tongs Tool Push to Connect Fittings Removal Tools Disconnect Clamp Plumbing Tool for 1/2”, 3/4”, 1” Brass Pipe Fittings

  • 1.Versatile Tool: This GIANNEER disconnecting tongs includes 3 sizes of interchangeable teeth(1/2”, 3/4”, 1”). It can remove the push-to-connect pipe fittings, such as copper and pipe in any combination easily and quickly. No extra glue, tape, soldering, pliers required. The disconnect tongs can be reused..
  • 2.Unique Design: The new design of disconnect line tool can reach the pipe perfectly. It brings much convenience to your work..
  • 3.Interchangeable Teeth: Press the button at the top of the removal tool, then insert the replacement piece to complete the switch..
  • 4.How to Use: To use the disconnect tool, simply slide the tongs over the fitting and the pipe, align the clamp with fitting and pipe. Then squeeze the tongs to press the fitting's release collar to remove the pipe from the fitting effortless..
  • 5.Superior Material: This disconnect tongs tool is made of S50C steel, and the surface is oxidized and blackened, which is not easy to rust. In addition, the tongs has been heat treated as a whole, with high hardness. It’s suitable for various operating environment....
Check Stock

7/8\ x 3 ft. Fiberglass Pipe Insulation 1/2\ Wall

  • ... YOUR IN-WALL BACKFLOW PIPES – Our irrigation backflow preventer now opens up on both sides and bottom with Velcro making it easy to cover pipes that even go into the wall. Plus, it’s made of a thick and durable industrial grade 600D PVC Oxford Polyester and a double stitch, so it won't come apart..
  • OUR BACKFLOW INSULATION POUCH SAVES ON COSTLY PLUMBING REPAIRS BEFORE THEY HAPPEN – Don’t wait before it’s too late and pay thousands of dollars on unexpected costs. Get instant pipe insulation with our durable season tested insulation sprinkler NOW!.
  • PROTECTS FROM SEVERE SNOW, RAIN, WIND, AND INTENSE SUN AND HEAT – From harsh Colorado snow to Arizona’s extreme sun and heat, our well covers never become brittle or peel like those other green pipe warmers for outdoors that expose the insulation, which can lead to major damage. Even during winds and rainstorms, our water-resistant backflow insulation pouch will stay snug and secure..
  • OUR PIPE COVERS FOR OUTSIDE NATURALLY BLENDS IN WITH YOUR HOME ENVIRONMENT – Don’t settle for the green obnoxious well house cover made of cheap plastic that cracks and gets brittle only after a season. We pride ourselves on both the quality and appearance of our water well pump covers that offer a clean natural ....
Check Stock

Brass Pipe Fitting Coupling-1/2 x 1/2 NPT Female Chrome Plated Finish Brass Pipe Fitting Coupler with 1 Roll Copper Joint Thread Sealing Tape for Home Plumbing Pipes 1pcs-Chrome Plated

  • 【MATERIAL】Our brass pipe fitting coupling is made of premium solid brass with chrome plated finish.chrome plated brass for corrosion resistance,....
  • 【APPLICATION】Our brass pipe fitting coupling can apply to water, oil and fuel, LP and natural gas, and be used to connect various pipes as well as....
  • 【STANDARD】Our brass pipe fitting coupling meets specifications ASTM B584 and ASME/ANSI B16 for quality assurance..
  • 【FUNCTION】1/2" female x 1/2" female NPT threads equal diameter hex nipple for connecting two female threaded pipes with same diameters. Or....
  • 【SERVICE】Our QC department do 100% quality inspection on the brass pipe fitting coupling before delivery. We will do 100% refund if brass pipe....
Check Stock

FORMUFIT 3/4\ PVC Fittings, 3-Way Corner Connector, Furniture Grade, Orange (8-Pack) - for Greenhouse, PVC Pipe Furniture, Maker Projects | Fits 3/4 inch PVC Pipe - F0343WE-OR-8

  • EASY TO USE: The FORMUFIT PVC 3-Way Corner Fitting is the fastest and most effortless way to build structural PVC projects with 3/4" PVC pipe. With these PVC fittings (3/4 inch), you can make cubes, PVC pipe furniture, boxes, or right-angle configurations which require a corner or three-point connection. This PVC 3-Way Connector has three (3) extra-deep sockets on separate planes at 90 degrees to each other..
  • GENUINE FURNITURE GRADE PVC: FORMUFIT 3-Way PVC Corner fittings are 3/4" PVC fittings that are injection-molded using ultra-strong, premium furniture grade PVC resin.
  • a superior engineered plastic designed for outdoor use, weatherability, and can be used in direct sunlight. UV resistance maintains fitting durability and appearance through years of exposure to varying weather conditions. In addition, this 3/4" PVC elbow has an impact strength that is five times as strong as other PVC pipe connectors due to the formulated impact modifiers..
  • SAFE AND NON-TOXIC: FORMUFIT 3Way PVC Fitting products are approved for fluid handling in hydroponics, aquaponics, residential irrigation, and aquarium use. These 3/4" PVC pipe fittings do not contain heavy metals, off-gassing phthalates, dioxins, or calcium cobalt filler as seen in imported, imitation/look-a-lik....
Check Stock

Joywayus Hex Nipple 1/2' Male x 1/2' Male Threaded Stainless Steel 304 Threaded Nipple Pipe Fittings for Brew Kit Home Piping (Pack of 5)

  • 【Size】1/2" Male x 1/2" Male Thread. Tapered thread. Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of pipe..
  • 【High Quality Material &Threads】Made of quality stainless steel 304, durable and sturdy corrosion resistance, ductility at high temperatures, and low magnetic permeability. High quality and deep threads allow the fittings to bite better, tight threads, not easy to slip..
  • 【Hex Nipple】The hex nipple fitting is a short length of pipe with threaded ends for connecting threaded pipes, and it has a hexagonal section in the middle for an increased bearing surface when adjusting the fitting with a wrench..
  • 【Operating temperature range】Temperature rating: -65 to 250 degrees F.
  • 【Widely Applications】Male threads for connecting to female threaded pipes, this premium pipe fitting can be used to connect various pipes, such as air pipe, fuel pipe, water pipe as well as air tools.
  • it can also be used with grease, fuels, LP and natural gas, refrigeration, instrumentation and hydraulic systems in low and medium pressure pipe line connections..
Check Stock

boost/vacuum gauge silicone coupler adapter - Car Turbocharger Pipe Fitting Universal Turbocharger Silicone Boost Pipe Hose Nipple Turbo Vacuum VAC Gauge Fitting TDI

  • Wide Application---The turbocharger pipe fitting is suitable for a 4mm inner diameter pipe. 100% brand new aftermarket Boost Pipe Fitting that has never been used.
  • For Boost Gauge---This boost hose nipple fitting allows you to fit a boost gauge or any other type of instrument where vacuum or boost pressure is required.
  • Superior Quality Aluminum Alloy---The turbo boost pipe hose nipple is made of high quality aluminum alloy and durable to use. The manufacture of the fitting meets the strict quality requirements.
  • Easy Installation---The turbocharger mounting kit is easy to install, simply drill a 8mm hole in your silicone boost pipe and push the nipple through the hole (from the inside), put on the sealing o-ring, washer and tighten down with the nut.
  • Quality Assurance---As a professional seller, we provide high quality products and considerate services. Every product must go through strict inspection to ensure reliable quality. Please rest assured to buy our products, hope you have a pleasant shopping experience.
Check Stock

Oatey 30863 Heavy Duty Solvent Cement, 8 Oz, Can, Liquid, Clear

  • Heavy duty Clear cement for use on all schedules and classes PVC pipe and fitting up to 12” diameter with interference fit, up to 18” for non-pressure.
  • Low-VOC solvent cement meets California South coast air quality management district (SCAQMD) 1168/316a or baaqmd method 40 and various environmental requirements.
  • Heavy Duty Clear cement for use on all schedules and classes PVC pipe and fitting up to 12î diameter with interference fit, up to 18î for non-pressure.
  • Lo-V.O.C. Solvent Cement meets California South Coast Air Quality Management District (SCAQMD).
  • Thick formula fills gaps in large diameter pipe and loose fitting joints.
  • Recommended for potable water, pressure pipe, conduit and DWV.
  • Recommended application temperature 40°F to 110°F / 4°C to 43°C.
Check Stock

JUSTOGO Backflow Preventer Cover Insulation Pouch, Pipe Insulation Sprinkler Valve Cover with Reflective Strip,Irrigation Backflow Preventers Protection Insulated Cover Pouch (16\W x 20\H )

  • 【Size: 16"W x 20"H】Outside dimensions, fit up to 14" wide backflow valves system. Measured your pipeline before purchasing, and reserve 2 inch or above . Our insulation pouches for backflow with reflective strip makes it easy to see it at night, without bumping into it. Suitable for all industrial ,home ,and commercial buildings. Perfect protection for your backflow preventer sprinkling system,ground anti-siphon valves,and irrigation vacuum brake valve..
  • 【Insulation & Waterproof】 This insulation pouch is made of heavy duty material 210D oxford fabric and industrial grade insulation EVA rubber foam, Waterproof, Cold resistance, and Heat preservation. Triple stitching for max security, both insulation and waterproof effect. Our backflow preventer cover with heat absorption principle of black, double freeze-proofing, durable in use and resistant to dirt. Provide you the best backflow preventers protection..
  • 【Easy to Use】No tool, you can place backflow preventer cover on the backflow pipe systems or yard hydrantand, fasten it with the rope on bottom easily ,without worry dogs or wind get it away. Suitable for water valve cover, well pipe cover, irrigation covers, and sprinkler valve cover..
  • 【Save High Repair Costs】Our pipe insulation cover p....
Check Stock

ADHES Foil Tape Aluminum Tape Heat Resistant Tape Metal Duct Tape 100mm x 50m

  • 1，[ High Temperature Resistant ] ADHES Foil Tape Withstands extreme temperature from -20°C to 180°C. Resists flame, thermally conductive, smoke transmission and some areas requiring thermal insulation..
  • 2，[ Excellent Waterproof ] ADHES Aluminum Tape can be used for repairing, sealing, Fixed wire and cable, hose, pipe etc. It also provides waterproof protection. Excellent moisture and weather resistant..
  • 3，[Chemical&Heat Resistant ] ADHES heat resistant tape has strong anti-corrosion properties and rusty resistant. Suitable for professional pipe sealing, and kitchen exhaust pipe sealing..
  • 4，[Widely Used Insulation Tape] ADHES tape Ideal for multiple uses, including repairing, sealing hot and cold air ducts, kitchen moisture prevent, duct insulation systems, stainless and plastic seams, temporary repair of metal surfaces, copper pipe fixing, etc.
  • 5，[Trusted Brand] ADHES has been manufacturing tape for 18 years since 2002. It never stop investing in improving products and hope to contribution to this world with more safety and quality products..
Check Stock

iCrimp CRQ01 Disconnect Tong Sized 1/2 inch, 3/4 inch, 1 inch, Removal Tool used for Demount Brass Push Fit, Push-to-Connect Fittings

  • CRQ01 Push-Fit fitting disconnect tool has 3 teeth available in 1/2 in., 3/4 in. and 1 in. sizes, allows for easy removal of brass push-to-connect fitting from pipe.
  • CRQ01 disconnect tong is the easiest way to disconnect brass Push to Connect fittings in hard to reach places where it can be tough to get leverage on the release collar.
  • Compact design with wide grip handles. One-handed operation. Quick and easy disassembly.
  • To use the disconnect tong, slide the tong over the fitting and the pipe. Squeeze the tong to press the fittings collar and pull the pipe from the fitting. Easier to use in tight situations.
  • The disconnect tool depresses the release collar using the force applied by your hand to allow the teeth of the fitting to release and the fitting to be removed, reducing the risk of installation errors.
Check Stock

Frost King FV30 Foam and Foil Pipe Insulation, 2\x l/8\x 30ft, Silver

  • Frost King 2" x 30' Self-Adhesive Insulated Foam Pipe Wrap - Use On Hot Or Cold Pipes - Foil-Backed Shell Reflects Heat And Seals Out Moisture And Air - Mfg #FV30..
  • Self adhesive, Foam and foil, Pipe and duct insulation, Insulation tape..
  • Manufacturer Name: Thermwell Products Co. ,.
Check Stock