Top Insulation Terminal

Baomain Red Insulated Fork Spade Wire Connector Electrical Crimp Terminal 16-22AWG #8 USA Screw 100 Pack

  • Insulation: Vinyl, Terminal Body: Copper.
  • USA screw: #8, screw dia.(mm): 4.3(.169").
Check Stock

Herco HE826 Precision Screwdriver Set

  • Interchangeable Insulated Screwdriver Set with an insulated handle, 5 interchangeable insulated blades, and a carrying pouch.
  • Screwdriver Set includes tip sizes: two #2 Phillips, two 1/4-Inch Slotted, one #1 Phillips, one #1 Square, one #2 Square, and one 3/16-Inch Slotted.
  • Securely and easily release the blade with a quick twist of the lock collar.
  • Interchangeable blades with a slim-tip to fit tight terminal blocks.
  • Handle and blade have a 1000-Volt insulation rating and meets or exceeds ASTM F1505 standard for insulation.
  • A layer of orange impact and flame resistant insulation protects from electric shock.
  • Cushion-Grip handles for greater torque and comfort.
Check Stock

Waterproof Tape Electrical Tape High Voltage Rubber Self-Adhesive Insulated Wire High Temperature Underwater Submersible Pump (Color : Black)

  • ✵. Suitable for electrical, electric wire, outdoor submersible pumps, etc., rubber insulation, high safety..
  • ✵. High-voltage insulation self-adhesive tape, strong insulation, high toughness, suitable for power industry, automobile and machinery maintenance.
  • ✵. strong adhesion, wear resistance, strong viscosity, anti-aging and waterproof and anti-interference, not easy to fall off, can be used in water, no leakage, and prevent accidents..
  • ✵. Economical general-purpose rubber tape with good self-adhesiveness, the insulation layer is integrated after bandaging, it is not easy to fall off, and the sealing is good.
  • ✵. It is suitable for the insulation protection of the normal working temperature not exceeding 80 kW, the insulation protection of the 10KV and the rubber in the cable terminal and the middle connection and the insulation of the communication cable connector..
Check Stock

SoftFinish Insulated Term Block Driver

  • Insulation According to ASTM F-1505-01, New VDE spec. 0682/part 201 and EN/IEC 60900, NFPA70E..
  • Individually Tested. Blade CVM steel, hardened, black finish..
  • Insulation molded directly onto blade. Wiha-SoftFinish handle, multi-component, cushion grip..
  • For combination Slotted/Phillips head terminal screws..
Check Stock

SINGARO Car Battery Terminal Connector, 4 Way Positive and Negative Pole Quick Release Terminal Clip, Applicable to SAE/JIS A Type Terminal Post, Compatible with Cars, Trucks and More（Gold-A）

  • High-Quality: Made of tinned copper, it has 4 ports for multiple cable connections, with good electrical conductivity and corrosion resistance, mainly used for SAE / JIS TYPE A rear car battery..
  • Widely Applicable: Our battery terminal connectors suitable for cars, vans, motorhomes, caravan, truck batteries, etc. Please be sure to connect correct terminal to correct polarity..
  • Size: For wires diameters 5.2 – 7.4mm (AWG gauges 1 – 4). Minimum wire size: 16mm (5/8″). Max wire clamp: 9.5mm/0.37in, mini wire clamp: 6.5mm/0.25in. Positive inner diameter: 17.5~19.1mm, negative inner diameter: 15.9~17.5mm..
  • You Well Get: Package contains 2 battery terminal connectors (positive and negative), 4 insulation sleeves, 4 Terminal block , 1 Battery Terminal Cleaners, 2 battery anti-corrosion washers and a hex wrench..
  • Enjoy Warranty: You will get quality products, if you have any questions, please contact us, we are always waiting for you here..
Check Stock

Swpeet 240Pcs Bullet Connectors Kit, 3.9mm Brass Bullet Male & Female Wire Terminals Connector with Insulation Cover for Motorcycle Scooter Car Truck with Insulation Sleeve

  • HIGH QUALITY ---- Terminals made of brass plating tin, high conductivity, anti-oxidation, durable, high-quality plastic protective cover, insulated flame retard. The Insulation sleeve Made of high quality plastic, terminal wiring is completed, the protective cover put on it, the perfect effect of insulation flame retardant, safe and secure. High quality materials to increase your productivity..
  • EASY TO US ---- Only need the wire are connected to the male and female terminals at both ends, and then the male and female terminals docked to complete the wiring easily, the male and female terminals can be disconnected when not needed. Save your work time and increase your productivity, you deserve to have them..
  • WIDE APPLICATIONS ---- We have prepared Molex connector Suitable for many applications, Such as car, motorcycle, truck, marine,quad bike,scooter, boats, electric instruments etc. In these specific applications, the work is very good and the work efficiency is high. Help you solve your actual problems..
  • PRODUCT INFORMATION ---- Male terminals size: 17.3x4mm, female terminals size: 17.6x4.6mm.
  • wiring range: 0.5-1.5mm. Electrical wire connector Color: Silver, Gold.
  • Size: 3.9mm.Come with male bullet terminals & male i....
Check Stock

Dinkle DSS2.5N-02P DIN Rail Terminal Block Press-Fit Jumper (Pack of 50)

  • Heavy Duty Safe UL 6 Gauge Battery Cable for Car Battery: Tinned copper wire has good electrical conductivity, thermal conductivity, stability, tin-plated copper can increase heat dissipation, improve electrical conductivity and improve wire performance. Red wire is positive while black is negative..
  • Battery Cables with Tin-plated Copper Terminal: Jumper cables kit for car with tin-plated copper has good stability, wear resistance, corrosion resistance, which improves the oxidation resistance of copper and maintains its conductivity better..
  • PVC Insulated Jacket: Automotive replacement battery cables flexible PVC insulation of battery cables resists abrasion, waterproof and moisture proof, flame retardant and heat insulation, and withstands the rigors of an automotive or marine environment..
  • 2 BATTERY CABLES: This 6awg battery cable kit contain one 20inches positive (Red) and one 20inches negative (Black) power inverter cables. 3/8” ring terminal at each end. The Maximum operating current is 60A.
  • WIDE APPLICATION: The 6 gauge positive and negative cables are ideal for car automotive, solar, marine, RV, motorcycle, golf cart, lawn/garden equipment or power inverter batteries.
Check Stock

DGZZI 50pcs Blue 5mm Pitch PCB Mount Screw Terminal Block Connector for Arduino (20pcs 2 Pin + 15pcs 3 Pin + 15pcs 4 Pin)

  • Application: crystal oscillator, IC socket, DIY PCB universal board, Dupont wire, digital tube, buzzer, Arduino UNO board, PIC programming unit, AVR ATMEL programming unit, connector suite, USB TO TLL module, power module, LCD module, RS232 TO TLL module..
  • Package includes: 20 x 2 Pin Screw Terminal Block + 15 x 3 Pin Screw Terminal Block + 15 x 4 Pin Screw Terminal Block.
Check Stock

VONVOFF 6.3mm Spade Crimp Terminal,20cm 16AWG Female Electrical Insulated Terminals,Spade Quick Connectors with Insulating Sleeve (30packs)

  • Each terminal in the electrical connectors are made of high quality tin-plated red copper, whose surfaces are plated with tin which ensures good conductivity and corrosion resistance.that resists corrosion to hold the wire tight when crimped.Your wire will never slip out of these heat shrink connectors..
  • The insulating sleeves are made of nylon, high conductivity, anti-oxidation, durable enough for your use,matching crimp terminal , protects splices from water and corrosion.Providing excellently insulates and protects electronic connections in rugged environments.
  • Female spade connectors are easy to use and inspect. It can connect product terminals of different sizes, saving time for wire bonding, and the outer insulating sleeve can be insulated,plays an effective role in insulation protection.ensures a strong wiring connection every time..
  • Package include：30pcs Spade Crimp Terminal (6.3mm female spade connectors red x 15pcs；6.3mm female spade connectors black x 15pcs).
Check Stock

10 Pieces White Terminal Blocks 12-Position Terminal Strip Dual Row Screw Terminals Electric Wire Connector 4 mm² Wire Gauge 20Amp 380V

  • Durable material: these white terminal blocks adopt flame-retardant PP material shell, which have insulation, corrosion resistance and wear....
  • Nice performance: the plated zinc alloy screws and copper-plated zinc alloy terminals have nice stability and conductivity, which can serve you for a....
  • Safe to use: the tightly screw can ensure reliable electrical contact, and helps prevent accidental contact with the terminal, so you can use it with....
  • Easy to install: you just need to strip the wires, then insert them into the terminal strip and tighten the screws, without troublesome welding needs,....
  • Wide application: these dual row screw terminals can be applied for the link of lighting lamps, household appliances, electrical control, power....
Check Stock

IWISS Deutsch Connector Crimping Tool Kit for Deutsch DT Connectors, Solid & Stamped Contacts, Delphi Weather Pack Crimper,Deutsch Pin Removal Tool Kit-12PCS

  • Automotive Harness Wiring Tool Kit: Ideal for pin & depin automotive electrical connectors like Weather Pack connectors, Deutsch Connectors, Molex connectors which are commonly found on cars, RVs, trucks, motorcycles, race cars and boats..
  • Deutsch Crimping Tools: IWD-16, IWD-12 & IWD-20 crimpers are designed for crimping Deutsch solid pins and sockets(Size 16, Size 12 & Size 20) to fit in Deutsch DT, DTP, DTM, HD10, Jiffy Splice connectors..
  • Weather Pack Crimping Tool: Delphi WeatherPack Crimper: IWC-1424B Metri-Pack and Weather Pack crimp tool aids in the assembly process of the Metri-Pack 150 & 280 and Weather Pack connector lines. The crimpers are designed to crimp the terminals and seals found in the Metri-Pack and Weather Pack series..
  • Open Barrel Terminal Crimper： IWC-1424A open barrel crimp tool is designed to crimp non-insulated, open barrel terminals, also known as OEM terminals. It has five crimp stations that roll the open barrel terminal tabs over the wire and insulation, crimping them to the terminal..
  • Pin Removal Tools: ET-01( DT-RT1) Deutsch wedgelock removal tool and depin tools for WeatherPack terminals, Deutsch DT, DTM, DTP connectors release terminals safely without damaging the vehicle wiring harness or terminal block..
Check Stock

Klein Tools 6984INS Insulated Screwdriver, 1000V Slim Profile Tip, 1 Square with 4-Inch Shank, Cushion-Grip Handle

  • Interchangeable insulated flip-blades with a slim-tip to fit tight terminal blocks.
  • Includes 3 double-ended blades: a #2 Phillips / 1/4-Inch Slotted.
  • Double-ended blades have a 3.5-Inch shaft length out of handle.
  • When used with Klein insulated handle, blades have a 1000-Volt insulation rating.
  • Handle with blade meets or exceeds ASTM F1505 standard for insulation.
  • A layer of orange impact and flame resistant insulation protects from electric shock.
  • For use with Klein Tools' Insulated Interchangeable Screwdrivers: Catalog Numbers 32286, 32287, 32288, 32293.
Check Stock