Top Insulator Connector

W5SWL ® Brand Premium Series BNC Male Clamp Coax Connector fits RG-8X Mini-8 and LMR240 Type Cable 2-Pack

  • Fits RG-8X, Mini-8 and Type 240 Coax Series Cable.
  • Delrin Insulator, Gold Plated RF Pin, Nickle Plated Body.
Check Stock

W5SWL Brand Premium Series BNC Right Angle Male Crimp Coax Connector fits RG-8X Mini-8 and LMR240 Type Cable

  • Fits RG-8X, Mini-8 and Type 240 Coax Series Cable.
  • Delrin Insulator, Gold Plated RF Pin, Nickle Plated Body.
Check Stock

ANMBEST VGA Solder Connector, 15PIN 3 Rows RS232 Terminal Adapter Breakout Board with Case Assortment Kit(10PCS Male + 10PCS Female)

  • EASY TO USE: Joint welding position with concave mouth, it is very easy to connect and creates permanent and extremely durable connections from cable to connector..
  • HIGH COMPATIBILITY: It can connect 232/485/422 serial devices. Such as computer and tax control machine, digital camera, PLC, PDA, MODEM, set-top box, barcode machine, industrial instrumentation and other equipment for communication..
  • HOMMIZATION: Each set of products is equipped with a set of cable pressing plate to prevent easy removal of the connected wires.
  • PACKED IN A STORAGE CASE: All of connectors are well packed and assorted in a transparent plastic storage case, convenient to carry and use..
Check Stock

Heavy Duty Weatherproof 12V Battery Cable Flanged Bulkhead Connector + Insulator Boot - Copper Core 3/8 Post, 550 Amp Max Rating - Marine, Solar, Car Audio and More - Made in the USA (Red + Black)

  • WEATHERPROOF DESIGN: Protect your electrical system from the elements and pass current through a panel or bulkhead up to 13/32" (0.40") thick. Includes both a red and black connector, reinforced silicone gaskets for the flange of the connectors and insulator boots for the terminal post to seal out the elements..
  • HIGH ENERGY TRANSFER: The nickel plated steel 3/8" post and solid copper core are continuously rated for 440 amps @ 12V, or a maximum of 550A @12V for up to 12 minutes, with a 80% duty cycle. The red connector and boot are ideal for positive power cables while the black connector and boot ideal for ground cables..
  • SIMPLE INSTALLATION: A 1.375" hole is all the connector needs to pass through the panel and a large hex nut secures it on the back side. The 4 holes of the flange allow you to use screws or bolts to further secure the connector and prevent any rotation..
  • MADE IN THE USA: You can purchase with confidence knowing your parts are designed and made right here in the USA. You are also helping to support a firefighter owned business when you buy R2X Racing parts. We thank you for your business..
  • 100% SATISFACTION GUARANTEED: If you have any issues with your order whatsoever, please reach out to us and we will make things right. Serving you is ....
Check Stock

ZUER Track Lighting Connectors,10Pcs LED Strip Connector,4Pin-10mm 5050/5630 RGB Waterproof Right-Angle Light Strip Connector,Unwired Gapless Solderless Adapter Terminal Extension LED Strip,White

  • The package contains: 10pcs4pin-10mm connector..
  • The LED light string connector is made of insulator PVC material, which is waterproof and flame retardant, easy to install and use. It can be directly connected by cutting off the light bar without welding..
  • Product application: 4pin-10mm is suitable for 5050/5630 RGB color changing LED strips.
  • 2: Slide the LED strip into the clip under the contact.
  • 3: Ensure that the "+" and "-" links of the LED strip are aligned.
Check Stock

Solar Panel Connectors 10AWG Compatible with MC4 Connecter to SAE Adapter PV Extension Cable Wire for RV Caravan Solar Panels Battery Charger kit with Two SAE to SAE Polarity Reverse Adapters

  • This solar SAE connector extension cable is10AWG, the pv wire is made with high quality Tinned Copper Wire. Note: Please make sure the polarity is correct before your final connection..
  • This SAE adaptor cable connects works for mc4 connectors PV cable. And it is 13.8 inches long..
  • Compatible with most of the other brand solar panel PV connectors and SAE connectors..
  • With 2pcs SAE to SAE polarity reverse adapters. The outlet cable connector’s polarity of different brand solar panel chargers maybe different. And the polarity may be reversed when the solar panels are connected with this cable. And this SAE to SAE connector would be the easiest way to make the reversed polarity correct..
  • Rated Current:35A.Rated voltage: 600V. Insulator Material: High quality soft silicone rubber. If you just need the polarity reverse connectors, please check the Asin:B07GPGPTFV.
Check Stock

PerfectPrime TL3164K K-Type Thermocouple Temperature Sensor Probes 316L stainless steel 572°F 1.8lb for surafce plane Teppanyaki

  • Operating temperature: -40 ~ 572°F (-40 ~ 300 °C) , Accuracy: +/-1.5°F, 0.4%.
  • Probe Type: Sledgehammer, Diameter : 63mm , Weight: 18 lb (822g) High grade 316L Stainless steel metal, K-Type Thermocouple Probe , Polytetrafluoroethylene (PTFE) Insulator.
  • Wire Length : 39" (1 m) , Connector: K-Type Flat Shape Male.
  • Application: Plane surface temperature for Teppanyaki , Flat Frying Pan.
Check Stock

100ft 5D-FB Ultra Low Loss Coaxial Cable 50 Ohm N-Male to SMA-Male Connector for 3G/4G/5G/LTE/ADS-B/Ham/GPS/WiFi/Cell Phone Signal Booster/Splitter/Amplifier/Repeater to Antenna Use

  • Low loss is key in an antenna setup, this coax cable is well made with premium quality, sturdy and waterproof.
  • Manufactured using 3m (10ft) Low Loss LMR-200 cable that provides better performance in 5GHz & 2.4GHz applications.
  • Specification: Center conductor True 18 AWG (1.1mm or 0.04-inch) Solid Copper, Dielectric insulator 2.95mm (0.12-inch) with foild shield. 144* 0.12mm....
  • This cable features an N-type connector with a threaded, weatherproof structure. The medium-sized RF connector quickly receives large amounts of data....
  • Used in most of connections between 50-Ohm amplifiers & accessories and antenna.
Check Stock

OKBA RV Vent Covers for Roof 14'x 22'x2.75', RV Skylight Cover for RV Trailer Camper/RV Shower Skylights,RV Vent Insulator with Reflective Surface

  • The rv skylight cover with 2.75" thick insulating foam and with double layer reflective surface which can reflect harmful UV-RAYS. Latest upgrade design rv vent insulator is both a cold insulator and heat insulator..
  • Fits for 22" x 14 x 2.75" RVs/Campers/Trailers shower skylights/vents,make sure the RV/camper skylight is vertical and depth is greater than 2.75" without obstructions..
  • The rv vent cover for roof will be completely return to its original shape until in 24-48 hours after you open vacuum sealed packaging,let the unfold rv vent insulation pillow lay flat..
  • The rv vent insulator with a removable case has a zipper,easy to remove if rv vent cover needs to wash. Easy to install, just get in vent and pull insulator cover out in one minute..
  • RV window insulation covering size:14x 22x2.75",package with 8pcs sewn velcro make RV sky light covers more fixed. If you have any question pls kindly let us know,we will provide 100% satisfactory service and Amazon local fastest shipping..
Check Stock

Camco RV Vent Insulator and Skylight Cover with Reflective Surface, Fits Standard 14 x 14 Inch RV Vents (45192)

  • Durable RV Skylight Insulator: Blocks and protects against the sun's damaging rays.
  • the vent insulator keeps your RV cool in the summer and warm in the winter.
  • 3-Layer Protection: The RV roof vent insulator features a reflective layer, a foam insulating layer, and a synthetic fleece layer that provides UV protection.
  • Saves Energy: The RV vent insulator and skylight cover has a full 2.75-inch foam coating that blocks heat transfer and increases AC efficiency.
  • Compatibility: The RV skylight cover fits standard 14-inch RV vents and is machine washable.
  • Quality Products: Camco makes quality products for RVing, boating, camping, towing, tailgating, and grilling that help take your passion for the outdoors to the next level.
Check Stock

Pack of 5 UHF PL259 PL-259 SO239 Male-Plug Crimp RF Connector for RG58/U LMR195 Coax Cable Compatiable with Ham Radio

  • 1.UHF PL259 coax connectors works great for RG58 LMR195 or similar Type Coax Cable.
  • 2.UHF PL-259 Male Plug Crimp-Type Connectors,Body brass with nickel plated , Pin gold plated ,Insulator PTFE(Teflon).
  • 3.PL-259 SO239 coax connectors suitable for Radio equipment and instrument, and ground transmission system,Teflon for Ham Radio.
  • 4.Gold-plated Contacts to ensure optimum signal transfer.
  • 5.Quantity: Pack of 5 Pieces UHF male crimp RG58 connector.
Check Stock

XRDS -RF 10-Pack PL259 Coax Connectors, PL-259 Connectors, PL-259 UHF Male Solder Connector Plug 50ohm RF Coaxial Connector for LMR400,KMR400,RG8,RG8U,Belden 9913,LMR400UF,7D-FB,RG213 Coaxial Cable

  • Low Loss Low Swr :The attenuates signal of this pl259 connector is less than 0.1db..
  • Great Quality: Body brass Nickel plated . Pin Gold plated. Insulator PTFE(Teflon). withstand high temperature when soldering and will not Melt..
  • Soldering Required：Ideal for build or repair coaxial cables, use this UHF male connector to create your own UHF cable which is widely used on ham radio, Short Antenna Feeder or any other application..
  • Compatible Cable Type: PL259 connectors work great with LMR400,KMR400,RG8,RG8U,LMR400UF,7D-FB,RG213 Coaxial Cable..
  • Package: Come with 10-Pack. All of our items come with a full year of warranty.
Check Stock