Top Intake Manifold Gasket Repair Kit

Tektall Intake manifold adapter for TBI adapts a small block 1.75" bore throttle body injection 1" thick Fits Pattern 2-barrel Manifold 500 350 CFM early carbs Alloy Durable

  • 【Fitment】Tektall Alloy Intake manifold adapter for TBI adapts a small block 1.75" bore throttle body injection 1" thick Fits Pattern 2-barrel Manifold 500 350 CFM early carbs..
  • 【Good Quality】 It is made of solid alloy with high finish. The installation hardware and installation sealing gasket are as shown in the figure. It can be installed without purchasing additional bolts. Everything you need is in the package, as shown in the picture. Please use studs if possible, do not over-tighten, and the correct design is suitable for its intended application without vacuum leakage..
  • 【High performance】 Tektall intake manifold adapters are threaded into smooth aluminum castings to safely install carbohydrate studs. The shape of the holes provides a smooth transition from carbohydrates to air intakes. Just turn the key and it will start immediately. It will definitely improve your throttle response..
  • 【Package includes】 1 X Intake manifold adapter, 2 X Gaskets, 1 X Mounting Hardware kit, 1 X Manual..
  • 【NOTE】 Please confirm the item if it matches your machine before you purchase. All Tektall products will undergo strict inspections and strong packaging before shipment.Please rest assured to purchase.Thanks..
Check Stock

Universal Car Oil Catch Can Kit Polish Baffled Automotive Reservoir Tank 300ml with Breather Aluminum Compact Dual Cylinder

  • ★ MAINTAIN EXCELLENT ENGINE PERFORMANCE - EIGIIS Oil Catch Can Kit prevents sludge from accumulating in the valve and intake manifold, keeping the engine clean. Increase horsepower and maintain engine life by removing oil from the PCV valve from the intake manifold..
  • ★ EASY TO CLEAN - EIGIIS Oil Catch Can Kit is fully Tig Welded and Thread Come with O-ring Gasket to Prevents oil leakage. You also don't need dismount it, just need to unscrew the bottom part of the reservoir, then you can clean it down easily..
  • ★ SAVE FUEL CONSUMPTION - EIGIIS Oil Catch Can Kit can effectively reduce the fuel consumption of high-speed engines and turbine engines. There is also a washable stainless steel screw on the filter/venting hole with a hose clamp to prevent loosening..
  • ★ HIGH QUALITY MATERIAL - EIGIIS Oil Catch Can Kit is made of high quality 0046 aluminum for added strength and durability. The capacity is 300ml,enough for daily use.Universal for most car such as Subaru,2014 Santa Fe and 2013 Sonata,Mazda MX-5 etc..
  • ★ ATTENTION- 100% product quality assurance. Please feel free t....
Check Stock

NON AFM DOD Kit with Camshaft Lifter 5.3 Head Gasket Oil Pump Valley Cover for 2005-2014 Chevy Silverado Suburban GMC Sierra 5.3L Engine

  • ...V8, for 2010-2013 Gmc Sierra 5.3L V8, for 2007-2014 Gmc Yukon Xl 1500 5.3L V8, for 2008-2014 Gmc Yukon 5.3L V8, for 2005-2006 Isuzu Ascender 5.3L V8, for 2005-2009 Saab 9-7x 5.3L V8.
  • NO AFM kit include head gasket, valve cover gasket, valve stem seals, exhaust & intake manifold gasket, front camshaft seal, o-rings, other small gaskets, cylinder head bolts, camshaft, oem gm balancer bolt, non afm roller lifters, lifter trays w/ bolts, front cover gasket set, non afm valley pan cover, high pressure oil pump, camshaft retainer plate gasket.
Check Stock

Vincos HS26157PT CS26157 ES71129 Head Gasket Set w/Bolts kit Conversion Gasket Set Compatible with Ram 1500 2002 2003 Durango/Dokota 00 01 02 03 Grand Cherokee 99-03 4.7L V8

  • ...ion of your opinions and demands,to improve our products and service for you.Enjoy your shopping time..
  • 【Interchange Part Number】HS26157PT, CS26157, ES71129, FSGM30400N, HBGM30400【Compatible with】1500 PICKUP 4.7L【Include】Head Gasket Bolts kit:head gasket.
Check Stock

Tektall Alloy 1\ Intake Manifold Spacer Replace for Ford GT-40 5.0 Mustang explorer Cobra 1987-1993 Durable

  • 【Good Quality】 Tektall 1" Intake Manifold Spacer made of High quality alloy.Sturdy and durable, and has reached OEM specifications..
  • 【Fitment】Tektall Alloy 1" Intake Manifold Spacer fit for Ford Mustang 5.0L GT-40 explorer Cobra 1987-1993 year..
  • 【Product Dimension】 THICKNESS 1" Made of High quality alloy..
  • 【High Performance】Tektall Intake Manifold Spacer can reduce heat transfer from the engine to the intake manifold. The result is a colder IAT (don’t forget, colder air is more dense, which means more horsepower!). The end result is increased horsepower and allowed to increase time with fewer explosions..
  • 【Package Includes】 1 X Intake Manifold Spacer, 2 X Gaskets, 1 X Mounting Hardware kit. Please confirm the item if it matches your machine before you purchase..
Check Stock

Exhaust Manifold Bolt Repair Kit Compatible with GM Trucks & SUV's（1999 & Newer ）With a 4.8, 5.3, 6.0 or 6.2 L

  • No need to remove broken bolts, The exhaust manifold bolt repair kit will repair the exhaust leak without having to remove the cylinder head or drill out and replace the broken end bolts.
  • Install this part is to repair the driver's side front or the passenger side rear corner broken exhaust manifold bolts.
  • Exhaust manifold repair kit compatible with Trucks & SUV's (1999 & Newer) With a 4.8, 5.3, 6.0 or 6.2 L.engine size..
  • Material: Exhaust manifold repair brackets made of carbon steel, exhaust manifold bolt repair brackets will not fail like the bolts do from heat and expansion of the manifold.
  • We value your shopping experience, If you encounter any problems in installing the exhaust manifold stud repair kit, you can feel free to contact us via Amazon Mail. We provide 24-hour mail service and will help you as soon as possible.
Check Stock

Ambienceo 26” 28” Black 2 Stroke 50cc 80cc Cycle Bicycle Gas Motorized Gasoline Engine Motor Kit CDI Air Cooling For Mountain and Road Bike 80cc Silver

  • CDHPOWER LD90 Cylinder Body w/Piston Kit.
  • Compatible with bottom end of all brand 2 stroke gas motor kit 66cc/80cc/pk80/LD80/LD90 including other....
  • New pk80 upgraded cylinder with piston kit, the piston kit is installed well inside of cylinder already.Excluding cylinder head..
  • Cylinder head gasket and cylinder body gasket are included.
  • The LD90 Cylinder Body and piston kit can be replacement of most 2-stroke gas motor engine such as pk80/LD80/LD90.
  • piston pin:10mmx39mm.This is a high hole piston for a 40mm stroke but with 48mm bore..
Check Stock

MOTO988 Carb Joint Intake Manifold Boot For Kawasaki Bayou 250 2003-2011 Bayou 220 1988-2002

  • ★High Quality: The main body of our Carburetor intake manifold boot is made of high-density rubber material, which has the advantages of corrosion resistance, high temperature resistance, friction resistance, longer service life, and longer service life..
  • ★Compatible Models: The carburetor intake manifold boot work with Kawasaki ATV Bayou 250 - KLF250 2003-2011 Kawasaki ATV Bayou 220 - KLF220 1988-2002.
  • ★Package content: You will receive these accessories after purchase: 1 x Intake Manifold Boot；1 x Gasket；2 x Screw.
  • ★Tips: Please carefully confirm your model and whether it is within the scope of application before purchasing, please refer to the applicable type and OEM number on the page..
  • ★After-Sales Service Guarantee: If the product you receive is defective or damaged and cannot be used, you can contact us at any time. We will try our best to solve it for you. We are committed to providing customers with the highest quality products and services as our goal..
Check Stock

Engine Oil Cooler and Filter Housing Adapter Kit - Replaces 68105583AF, 68105583AE - Compatible with Chrysler, Dodge & Jeep 3.6L V6 Vehicles - 200, Town & Country, Grand Caravan, Wrangler, Ram

  • Replacement Engine Oil Cooler & Filter Housing Adapter Kit - With Intake Manifold Plenum Gasket Set - Keeps the engine oil clean as it circulates through the engine. This replacement Oil Filter Housing Adapter Kit also comes with a new oil filter pre-installed for a complete and worry free installation. If you are experiencing oil leaks above the transmission or near the cooler housing where the oil filter is then you may have a problem with your oil filter housing adapter..
  • Compatible Replacement for Dodge, Chrysler & Jeep Vehicles With 3.6L Pentastar V6 Engine - 2014 - 2017 200 | 2014 - 2017 300 | 2014 - 2016 Town & Country | 2014 Avenger | 2014 - 2017 Challenger | 2014 - 2017 Charger | 2014 - 2015 Durango | 2014 - 2016 Grand Caravan | 2014 - 2016 Cherokee 3.2L | 2014 - 2015 Grand Cherokee | 2014 - 2017 Ram 1500 | & more. See below for full vehicle list..
  • Replaces Part# 68105583AF, 68105583AE, 68105583AA, 68105583AB, 68105583AC, 68105583AD usually found on popular , Journey, Wrangler, Ram Promaster 1500, 2500, 3500 including year models 14, 15, 16, 17. The oil filter housing can easily be located above the engine and can be accessed by removing the intake manifold. It is best and practical to replace the whole housing rather than waste time....
Check Stock

GOOFIT Fuel Filter 90 Degree Bent Intake Manifold Pipe with Intake Manifold Gasket Spacer Replacement for 50cc 70cc 90cc 110cc 125cc Taotao Roketa ATV Dirt Bike Go Kart 4 Wheeler

  • Size:Intake Manifold Pipe:Inside diameter:18mm/0.71",27mm/1.07",Mounting hole 45mm/1.78".
  • Gasket Spacer:Opening diameter:19mm/0.75",distance between....
  • Replacement for 50cc 70cc 90cc 110cc 125cc Taotao Roketa ATV Dirt Bike Go Kart 4 Wheeler.
  • Replacement for 50cc 70cc 90cc 110cc horizontal engine ATV scooter carburetor.
  • Package including:Fuel Pump Petcock x 1pc,Intake Manifold Pipe x 1pc,Gasket Spacer x 1pair,GOOFIT keychain x 1pc.
  • Warranty:We are always available to help our customers.Please message us for replacement or refund if you are not satisfied with the order.
Check Stock

Intake Manifold w/Runner Control Valve & Air Pressure Sensor Compatible with 09-17 Dodge Journey Avenger/Jeep Compass Patriot/Chrysler Sebring 1.8L 2.0L 2.4L Part# 4884495AK 4884495AH 911-902

  • ...ble marerial to meet or exceed OE standard quality and performance requirements. ✴ The gasket with upgrade materials to ensure a perfect seal with no risk of leaking. ✴ Heat stabilized nylon providing better resistance to cold/hot cycles and further prevent any chances of cracking..
  • ✔ 【PACKAGE】1 pcs Intake Manifold kit Includes: 1 * NEW Intake Manifold with Gasket + 1 * NEW Flow Control Valve & 1 * NEW Air Pressure Valve with Bolts and washers【NOTE】 Please reference to the first picture as shown..
  • ✔ 【EXCAT MATCH】 Engines: 1.8L/ 2.0L/ 2.4L ✴ 2007-2010 Jeep Patriot, Jeep Compass, Dodge Caliber ✴ 2011-2017 Jeep Patriot, Jeep Compass, Dodge Caliber - 2.4L ✴ 2007-2010 Chrysler Sebring & Dodge Avenger - 2.0L 2.4L ✴ 2009-2011 Dodge Journey Engine - 1.8L, 2.0L, 2.4L (Pls check detailed fitment in the product description below.).
  • ✔ 【OE NUMBERS】 4884495AK/ 4884495AH/ 4884495AI/ 4884495AJ/ 4884495AC/ 4884495AD/ 4884495AE/ 4884495AF/ 4884495AG/ 911-902.
  • ✔ 【PURCHASE WITH CONFIDENCE】In BSOC AUTO Store, right parts are guaranteed. If you are not sure about the vehicle fitment or the part ever fails on your vehicle after purchase, please contact us and we’ll take care of it. 30 Days money back and one years replacement warranty ....
Check Stock

HOLLEY MODULAR LO-RAM EFI MANIFOLD KIT,TOP-FEED PLENUM,BLACK FINISH,COMPATIBLE WITH GM LS1,LS2 & LS6 GEN III & IV ENGINES

  • Brand New Holley Modular Lo-Ram EFI Manifold Kit, Top-Feed Plenum, Black Finish, Compatible with LS1, LS2 & LS 6 Gen III & IV Engines (Part #300-620BK).
  • The 300-620 top-feed plenum entry configuration is designed to allow the included Hi-Ram 105mm plenum top to be fitted to a low-profile base intake manifold. The short runner, low-profile base intake manifold intended for forced induction applications was conceived to package with an air to water plenum mounted intercooler with a shorter overall height than possible with other existing intake manifolds..
  • The Holley LS1/2/6 Lo-Ram intake manifold kits are designed for GM LS Gen III & IV engines equipped with GM LS1/2/6 (cathedral port) cylinder heads. These intake manifolds will work with OE or aftermarket cylinder heads. The fuel rail kits come with 2 sets of brackets: A set for long (usually standard length) fuel injectors & set for short (such as Pico, or LS7) fuel injectors..
  • NOTE: Total Height: Top-Feed Plenum Configuration w/105mm Long. Mount EFI Plenum Top - 9.07" (without intercooler installed) | Top-Feed Plenum Configuration w/105mm Long. Mount EFI Plenum Top, w/ intercooler installed - 9.07" + intercooler thickness.
  • Specs: Brand: Holley EFI | Color: Black | Construction: Cast | Emission Code: 3 ....
Check Stock