Top Intake Manifold Runner Control Valve

BBC Holeshot Dual Plane Intake Manifold Oval Port, Plain

  • This Holeshot Manifold by Speedway Motors is the lowest profile intake design.
  • It is the perfect improvement over stock intake manifolds without worrying about hood clearance.
  • Manifolds are a dual-plane intake runner design and machined to accept spread port carburetors.
  • Has a idle-5500 rpm range and an oval port.
  • Features an aluminum construction with a natural finish.
Check Stock

Dorman 264-968 Engine Valve Cover Compatible with Select Buick/Cadillac/Chevrolet Models

  • Direct replacement - made from injection molded polymer for superior fit and heat resistance, this valve cover matches the original equipment part for fit and function.
  • Complete solution - this valve cover includes a new gasket and new bolts for a complete repair.
  • Quality tested - this part has undergone try-on and material testing to ensure a quality fit and reliable service.
  • Related repair - this valve cover often fails due to a faulty intake manifold.
  • also replace manifold if it is missing PCV valve.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

BBK 1506 3/8\ Phenolic Intake Manifold Spacer Kit for GT-40 and Cobra EFI Intake Manifolds

  • BBK is your Number One Aftermarket Performance Brand in the USA - American Designed and Built.
  • Non Heat Transfering Phenolic Material Reduces Upper Intake Manifold Temepratures for Reduced Air Intake Temperatures.
  • Cooler Intake Temperatures Allow Denser Air For Improved Performance.
  • Offers Increased Valve Cover Clearance for Larger Rockers and Valve Covers.
  • Easy to Install - Includes New Longer Hardware and 2 New Gaskets.
Check Stock

BBK 1520 3/8\ Phenolic Intake Manifold Spacer Kit for Edelbrock Performer EFI 5.0L Intake Manifold

  • BBK is your Number One Aftermarket Performance Brand in the USA - American Designed and Built.
  • Non Heat Transfering Phenolic Material Reduces Upper Intake Manifold Temepratures for Reduced Air Intake Temperatures.
  • Cooler Intake Temperatures Allow Denser Air For Improved Performance.
  • Offers Increased Valve Cover Clearance for Larger Rockers and Valve Covers.
  • Easy to Install - Includes New Longer Hardware and 2 New Gaskets.
Check Stock

CATUDIY Intake Pipe Valve Cleaner Machine for Car Engine Fuel System Cleaners, Fuel Cleaning Tool Automotive Engine Carbon Deposit Cleaner 110V Valvetronic System Walnut Powder Sand Carbon Deposition

  • Intake Pipe Valve Cleaning Machine -- An advanced equipment (3-Year Warranty) used to deeply remove highly sticky carbon deposits on the engine intake manifold and intake&exhaust valves. Regular carbon cleaning keeps the engine in healthy condition so as to provide high quality power continuously (Solve the problems of unstable idling, insufficient fuel combustion, and reduced air-fuel ratio).
  • Working Principle of Engine Cleaner -- Close the intake valve and then spray walnut powder into engine intake via air pump, while it will recycle the walnut powder through vacuum. This is a closed loop. Walnut powder will impact the carbon deposits on the inner wall of the intake pipe. After thousands of impacts, carbon deposits will be clear thoroughly.
  • Safe & Efficient -- As an eco-friendly pure natural polish material, walnut sand has advantages of hardness, pressure resistance and wear resistance. It can clean the intake pipe and backside of the intake valve thoroughly without pipes damage and corrosion different from a pollution-caused chemical intake valve cleaner.
  • Integrated Design -- Walnut sand can be sprayed and recy....
Check Stock

E1840P Sloppy Mechanics Stage 2 Camshaft LS7 Lifter 1218 Valve Spring Head Gaskets Bolts Kit for 1997-2007 LS LS1 5.3L 5.7L Engine

  • Cam and lifter kit include: 1 intake seal set, 1 timing cover gasket set, 1 valley cover gasket, 1 oil pan gasket, 2 exhaust manifold gaskets, 1 rear main seal, 1 rear main cover gasket, 2 multilayer steel cylinder head gaskets, 30 cylinder head bolts, 16 ls7 valve lifters, 16 beehive valve springs, 1 e-1840-p camshaft.
  • E1840P camshaft kit fit for 1997-2007 GM Chevy LS L92 L99 5.3L 5.7L V8 LSx Sloppy Stage 2.
  • 16pcs valve springs: outside diameter of outer spring (in): 1.290 in.
  • inside diameter of outer spring (in): 0.885 in.
  • We offer you a 12-month warranty. Any problems, just contact us through email, we ....
Check Stock

2Pcs Straight Aluminum Bare Cylinder Head Compatible with Chevy Small Block 302/327/350/383/400 SBC 200cc Intake 68cc

  • ▶️ High grade aluminum, bronze valve guides, hardened seats, advance port design for greater air flow.
  • ▶️ This head is 200cc intake runner with a 68cc combustion chamber, 68cc combustion chambers improve performance and retains stock compression on 1970 and earlier.
  • ▶️ Lighter than Iron Heads. Each Head weighs 10.33kg.
Check Stock

FEL-PRO VS 50442 R Valve Cover Gasket Set

  • BRTEC Automotive Replacement Head Gasket Sets Package List- Head Gasket, Intake & Exhaust Manifold Gasket, Valve Cover Gasket, Viton Valve Stem Seals/ Grommets, Other O-Rings/ Seals, Other Small Gaskets, and Other Engine Sealing Kits.
  • ( Please refer to the first image to confirm the components you may receive, we always check every package before shipment, please massage us for a replacement if there are missing parts after you receiving the package )..
  • Head Gasket Part Number: ES71313, HS26181PT, HS26181PT-1, HS26181PT-3, TS2618100HBSI.
  • Check Before Purchasing - Please check the d....
Check Stock

Carburetor Intake Manifold Boot Joint for Yamaha Warrior 350 YFM350X 1987-2004, Fit for Yamaha Wolverine 350 YFM350FX 4x4 1995, 1UY-13586-01-00, 1UY-13586-02-00, CNC 6061-T6 Aluminum Alloy

  • 1. Fitment - CNC aluminum alloy carburetor carb intake manifold boot fit for Yamaha Warrior 350 YFM350X 1987-2004, fit for Yamaha Wolverine 350 YFM350FX 4x4 1995.
  • 2. Reference OE Number - 1UY-13586-01-00, 1UY-13586-02-00.
  • 3. Function - Replacing the new intake manifold interface can solve problems such as high idle speed, weak acceleration and easy flameout during acceleratio. The carburetor intake manifold boot replaces the old or broken manifold boot perfectly..
  • 4. Material + Installation - Carburetor carb intake manifold boot made of premium quality rugged design with aluminum alloy material, for extended lifetime, with high temperature resistance, high pressure resistance and other advantages. Easy to install, just replace the old or broken intake manifold interface during installation.
  • 5. Service - We offer CNC aluminum alloy carburetor carb intake manifold boot 2-years shelf life, hassle-free return and money back policy, buy with confidence! any questions about carburetor carb intake manifold boot, please contact us by email, we will reply you within 12 hours, you will get a brand new CNC aluminum alloy carburetor carb intake manifold boot.
Check Stock

JMCHstore Stage 2 Performance Mainfold Kit for Predator 79cc 3HP Engine, Coleman CT100U CC100X 98cc, Massimo MB100 Mini Bike, Slide Carb Adapter 154F 3.0hp Engine Parts, Black

  • JMCHstore Black Stage 2 Performance kit for Coleman CT100U CC100X RB100 98cc Mini Bike.
  • For Predator 3 HP (79cc) OHV Horizontal Shaft Gas Engine.
  • Next Level Performance. Thanks to High Flow Air Filter & Performance PZ19 Carb. Not only the intake air become smoother but also speed up. W/ massive amount of intake mixture , you should experience an increased top speed of about 10 - 15 mph..
  • Solid curved 19mm intake manifold. The length and shape of this manifold is great for increased low to mid range power. Great setup for the 79cc/99cc looking for more power!.
  • Air Filter Breather, for valve cover vent tube. Once you remove the stock air filter box, you have to disconnect the breather tube that goes to the valve cover. This breather filter is the perfect solution for the breather tube..
Check Stock

Permatex 82194 Ultra Grey Rigid High-Torque RTV Silicone Gasket Maker, 3.5 oz. & 82180 Ultra Black Maximum Oil Resistance RTV Silicone Gasket Maker, 3.35 oz. Tube

  • Product 1: Designed specially for high-torque and high vibration applications.
  • Product 1: Maximum vibration resistance, with outstanding resistance to oils, cooling and shop fluids.
  • Product 1: Low odor and non-corrosive formula.
  • Product 1: Suggested Applications: Valve covers, oil pans, intake manifold end seals, timing covers, water pumps, thermostat housings.
  • Product 2: Sensor-safe, non-corrosive formula designed for superior adhesion to oily surfaces and long term durability.
  • Product 2: Superior resistance to powertrain fluids including engine oil, transmission fluid, gear lube and coolants.
  • Product 2: Temperature Range -65°F to 500°F (-54°C to 260°C) intermittent.
  • Product 2: Suggested Applications: Valve covers, oil pans, intake manifold end seals, timing covers, and differential covers.
Check Stock

MOSTPLUS 615-175 329-01780 W7Z9424AA1 Intake Manifold Compatible with Ford Crown Victoria Explorer Mustang 4.6L

  • 【Fitment】— Compatible for 2001-08 Ford Crown Victoria Intake Manifold V8 4.6L (8th Vin Digit W) , Compatible for 2006-11 Ford Crown Victoria Intake Manifold V8 4.6L (8th Vin Digit V) , Compatible for 2001-05 Ford Crown Victoria Intake Manifold V8 4.6L (8th Vin Digit 9) , Compatible for 2002 Ford Explorer Intake Manifold V8 4.6L (8th Vin Digit W) , Compatible for 1999-04 Ford Mustang Intake Manifold V8 4.6L (8th Vin Digit X)(Detailed Apllication below).
  • 【OEM Part Number】 — 1W7Z9424AB, 329-01780,3W7Z9424AA,3W7Z9424AD,615-175.
  • 【Function】— The intake manifold supplies air to the cylinders of an engine. High quailty material, excellent performance, high resistance..
  • 【High Quality】— This intake manifold is made to meet or even exceed the standard quality to help your car start normally..
  • 【Note】— Not correct for models with coolant-heated PCV. Please check the year, make, model and trim of your vehicle in the garage before purchase..
Check Stock