Top Intake manifold

Tektall Intake manifold adapter Replace for TBI 5.7 350 adapts a small block 1.75" bore throttle body injection 1" thick Fits Pattern 4-barrel Manifold Alloy Durable

  • 【Fitment】 Tektall Intake manifold adapter Replace for TBI 5.7 350..
  • 【Good Quality】 Made from a super durable and heat resistant composite material. This part is far better that a 1/2" or less steel or aluminum spacer.A full 1" thick . Bores match the bores of the throttle body and taper to match a 4 barrel intake without hurting airflow which is a proven way to increase TQ and airflow.Mounting holes to the manifold are slotted for tuning adjustments..
  • 【High performance】 Tektall Intake manifold adapter's bores are tapered in to adapt the wider TBI unit to the narrow Holley edelbrock pattern 4bl manifold. This is very important many adapters don't have this feature. This can cause poor performance that is blamed on the computer, injectors ect. when it is really the adapter..
  • 【Package includes】 1 X Intake manifold adapter, 1 X Gaskets, 1 X Mounting stud kit （Studs, nuts, and washers.） , 1 X Manual..
  • 【NOTE】 Please confirm the item if it matches your machine before you purchase. All Tektall products will undergo strict inspections and strong packaging before shipment.Please rest assured to purchase.Thanks..
Check Stock

GY6 50CC 49CC Carburetor with Electric Choke for 4 Stroke Scooter Moped 139QMA 139QMB Taotao Engine PD18J Carb with Intake Manifold Air Filter kit

  • GY6 50cc Carburetor with 2-pin Male Electric Choke 18mm Intake Manifold.
  • GY6 50CC Carburetor comes with a #75 Main Jet. upgraded jets for better starting, idling and performance..
  • Size:Intake Manifold Side:18mm(Inner Diameter),28mm(Outer Diameter).
  • Air Filter Intake:35mm(inner diameter),39mm(Outer Diameter) ..
  • This is a 18mm Intake Carburetor,it fits most 4 stroke GY 49CC 50cc 80c 139QMA 139QMB Engine scooters carb, such as Taotao Baja, JMstar, Jonway,....
  • Package include: 1x Carburetor,1x Air Filter,1x Fuel Filter，1x Plug Spark,1x Intake Manifold，2 xGaskets..
Check Stock

DNA Motoring OEM-ITM-021 Factory Style Engine Upper Intake Manifold Replacement

  • Intake Gaskets Molded into the Intake Manifold.
Check Stock

Dokili Aluminum Intake Manifold Small Block Air Gap for SBC Vortec 350 1996-up

  • 【Fitment】Dokili aluminum intake manifold is compatible with 96+ Vortec engines..
  • 【Features】Dokili intake manifold comes with 180° high rise and dual-plane designs, providing excellent high RPM power, from 1,500 to 6,500 rpm. It features four corner water outlets, dual distributor hold down provisions, accepting late model water neck, A/C, alternator and HEI brackets..
  • 【Premium Material】Built with natural finish aluminum of superb quality and fit. Angles and straightness comparable to factory manifolds. Port size measures 2.06" x 1.18" and intake measures 4.65" tall..
  • 【Dual Plane】The intake is square bore style and works with all 4150 Holley style carburetors. Dual plane designs have two smaller plenums that receive air from the carburetor or throttle body, which results in a higher velocity through the booster making the engine more responsive to the driver..
  • 【Air Gap】The air gap design allows air to flow under the plenum to prevent heat transfer from the engine resulting in more horsepower..
Check Stock

Engine Intake Manifold with Flow Control Valve Compatible with 2007-2017 Jeep patriot compass/2007-2011 Dodge Caliber Avenger Journey/2007-2009 Chrysler Sebring Replace # 4884495AK 911-902 4884495AH

  • ➤ 【PREMIUM QUALITY BUT LOWER PRICE】 Our intake manifold is designed for high durability and resistance by our strict process standards. We offer original manufacturer quality at lower cost than getting replacement at dealer..
  • ➤ 【IDEAL REPLACEMENT】 This intake manifold directly replaces the original. Perfect fit, easy installation, high reliability.(NOTE❗)This kind of intake manifold with baffle，can't fit for others without baffle. Please kindly check the 5th image as show on..
  • ➤ 【MANUFACTURER PART NUMBERS】4884495AK 4884495AD, 4884495AE, 4884495AF, 4884495AG, 4884495AH, 4884495AI, 4884495AJ, 4884542AC.
  • ➤ 【FITMENT】Compatible with 2007-2010 Jeep Patriot,Jeep Compass 2.0L 2.4L / 2011-2017 Jeep Patriot,Jeep Compass 2.4L / 2007-2009 Dodge Caliber 1.8L 2.0L 2.4L / 2010 Dodge Caliber 2.0L 2.4L / 2011 Dodge Caliber 2.4L / 2008-2009 Dodge Avenger 2.4L / 2009-2011 Dodge Journey 2.4L / 2007 -2009 Chrysler Sebring 2.4l.
  • After installing the Flow Control Valve valve, please wave the manifold baffle by hand to ensure that it can rotate smoothly, and then install the manifold on the car.
Check Stock

OE Style Engine Upper Intake Manifold Compatible with Ford Grand Marquis Muatang Lincoln Town Car 96-00

  • ▶️ Intake Gaskets Molded into the Intake Manifold.
  • ▶️ Direct Replacement for Factory Part.
Check Stock

Physeed 139QMB Carburetor Manifold Intake Replacement for 18mm Tao Tao 50CC Carburetor GY6 49CC 4 Stroke Chinese Scooter Moped Mini Dirt Bike ATV Ruckus Racing Kymco

  • PD18 18mm Carburetor for 4 Stroke GY6 49cc 50cc Chinese Scooter 139QMB Moped for Taotao Kymco Scooter Jonway Baja Jmstar Lance NST Peace Banzer Barton....
  • GY6 50CC Carburetor for most of Chinese Made Scooters and ATV. Such as JONWAY, JMSTAR, ROKETA, SUNL, TANK, PEACE, TAOTAO, Dongfang, Kazuma, JCL,....
  • High performance Carburetor for GY6 49cc 50cc 4 Stroke engines..
  • Air Filter Intake:35mm(inner diameter), 39mm (Outer Diameter).
  • Intake Manifold side: 18mm (Inner Diameter), Intake Manifold side:....
  • Package comes with: 1pc Carburetor + 1pc Air Filter + 2pcs Fuel Filter + 2pcs Spark Plug + 1pc Intake Manifold.
Check Stock

Dorman 615-380 Engine Intake Manifold for Select Buick/Chevrolet Models OE FIX

  • Improved design - this intake manifold has been redesigned to correct a common PCV valve failure in the original equipment design to reduce excessive....
  • Complete kit - this manifold includes a new throttle body gasket, port gaskets, fuel injector O-rings, MAP sensor O-ring and screws for a complete....
  • Quality American construction - this intake manifold is engineered and manufactured in the United States of tough nylon polymer to resist cracking and....
  • Related repair - this manifold often leads to failure in the valve cover's PCV diaphragm.
  • a damaged valve cover will often need to be replaced at the....
  • Ensure fit – to make sure this part fits your exact vehicle, input your make, model and trim level into the Amazon Garage.
Check Stock

A-Team Performance - EFI Fabricated Intake Manifold with Fuel Rails and Throttle Body Short - Compatible with GM Chevrolet LS3 L92 SBC Small Block Chevy V8 GEN. III/IV (LS-BASED) Black

  • EFI Fabricated Intake Manifold with Fuel Rails and Throttle Body Short Black.
  • Compatible With: Chevrolet Small Block V8 Gen. III/IV (LS-based) · 4.8 L / 293 In3 (L20, Ly2) · 5.3 L / 325 In3 (Lc9, Lh6, Lh8, Lmg, Ly5) · 6.0 L / 364 In3 (L76, L96, LFA, LY6) · 6.2 L / 376 LN3 (L92, L99, LS3, LSA) Rectangle Port Intake only!.
  • Fabricated Aluminum Sheet Metal Intake Manifold -102MM Throttle Body -Fuel Rails & Cross Over -4-Bolt LSX Gaskets & Hardware are included..
  • Throttle Body is Dive by Cable Overview We Designed Our Fabricated Aluminum Sheet Metal Intake Manifold to Improve the Look and Performance of Your LS Engine..
Check Stock

Intake Manifold Boot and Gasket For Honda CRF80 F 2004-2013 XR80 R 1985-2003 CRF100 F 2008 2009 17110-GN1-000

  • ▶Compatible Models：For HONDA CRF80F 2004-2013 XR80R 1985-2003 CRF100F 2008-2009 17110-GN1-000..
  • ▶Function: Our carburetor intake manifold cover can perfectly replace the old or damaged manifold cover. Replacing a new intake manifold interface can solve the problems of high idle speed, weak acceleration, and easy flameout during acceleration..
  • ▶High-Quality Materials: The main body of our carburetor intake manifold cover is made of high-density rubber material, which has the advantages of corrosion resistance, high temperature resistance, friction resistance, longer service life, and longer service life..
  • ▶Tips before Purchase: Please carefully check whether your model is applicable to our products before buying. You can refer to the applicable models, pictures and OEM numbers on our page to help you determine your choice..
  • ▶After-Sales Service: If you have any questions about our products during the use and purchase process, you can contact us by email at any time, we will try our best to solve the problem for you, and we will provide comprehensive quality assurance for our products..
Check Stock

MOTO988 Carb Joint Intake Manifold Boot For Kawasaki Bayou 250 2003-2011 Bayou 220 1988-2002

  • ★High Quality: The main body of our Carburetor intake manifold boot is made of high-density rubber material, which has the advantages of corrosion resistance, high temperature resistance, friction resistance, longer service life, and longer service life..
  • ★Compatible Models: The carburetor intake manifold boot work with Kawasaki ATV Bayou 250 - KLF250 2003-2011 Kawasaki ATV Bayou 220 - KLF220 1988-2002.
  • ★Package content: You will receive these accessories after purchase: 1 x Intake Manifold Boot；1 x Gasket；2 x Screw.
  • ★Tips: Please carefully confirm your model and whether it is within the scope of application before purchasing, please refer to the applicable type and OEM number on the page..
  • ★After-Sales Service Guarantee: If the product you receive is defective or damaged and cannot be used, you can contact us at any time. We will try our best to solve it for you. We are committed to providing customers with the highest quality products and services as our goal..
Check Stock

Skunk2 372-05-0275 Thermal Intake Manifold Gasket for Honda D-Series Engine

  • With the use of Skunk2 thermal gaskets, air intake temps are minimized which provides the your engine cooler air for combustion, and that means....
  • This and bypassing several heat sources can provide you up to 5 percent more power.
  • Skunk2 Racing thermal intake manifold gaskets are perfect for your....
  • Protects against heat soak and reduces the incoming air temperature before it reaches the cylinder head.
  • Reduces heat transfer into the intake manifold.
Check Stock