Top Integral Flanged End

DASBET 17PCS Auto Bearing Race Seal Driver Disc Tool Master Set Wheel Axle Bushing

  • 【Direct use of】：Pneumatic bushing driver set removes and installs truck and trailer 1-3/8" anchor pin bushings and stuck anchor pins. Includes an 11-1/2" long driver that allows bushings to be driven straight without removing the hub assembly. Double-sided cone snaps onto driver to drive out and install bushings. Use flanged end to install and tapered end to remove. Also removes truck leaf spring bushings..
  • 【High quality】 : The use of high quality reinforced materials, wear and corrosion resistance, long service life, so that it has a longer peak work rate, I believe it can make your work more relaxed.
  • [Scope of application] : Truck bushing removal, which also includes removing pins and inserting bushings.
  • 【Buy With Confidence】: Lifetime warranty service, once there is a problem with the product, contact us here to solve it perfectly for you, without worrying about quality problems.
Check Stock

JSM Bicycle Hub Flanged Axle Nut and Safety Washer Kit, 3 Size for Front and Back Bike Wheel

  • It is made of high strength steel with antirust treatment.
  • Includes 6 sets of 3-size flange nuts and safety washers(for both Metric and British System), suitable for most bicycle replacements.
  • Spec: NUT WM FRT 5/16x26 FLANGED(2 sets), NUT WM FRT 3/8x26FLANGED(2 sets), Metric NUT FLANGED M10*1(2 sets).Please refer to picture.
Check Stock

AEM (30-3300) V2 1-Gallon Water/Methanol Injection Kit with Internal MAP Sensor

  • Boost Dependent controller features on-board MAP sensor with large adjustment knobs, integrated plug for harness connection, integrated fuse, covered status light and test button for enhanced splash resistance and mounting tabs.
  • Wiring harness is terminated with a positive-lock connector on one end with color-coded wires to ease installation, power and ground wires for the pump and additional wire for optional on/off fluid solenoid.
  • Internally-bypassed water/methanol injection pump does not cycle on/off and provides quiet, smooth operation.
  • it features robust construction including integral hose fittings.
  • Three interchangeable injector nozzles to cover a wide variety of HP levels (250cc/min, 500cc/min and 1,000cc/min) 1 gallon tank with integral conductive low-fluid sensor and positive lock connector.
Check Stock

WJB WS4250 Oil and Wheel Seal Replaces 4250

  • The flanged design allows for an easier and secure installation. This ensures a longer service life for the bearing.
  • Outside ridges of the seal offer a secure and proper fit within the bearing.
  • Enhanced performance in a wide range of temperatures and fluid environments allows for increased reliability for wheel end performance.
  • An extra dust lip Offers enhanced dirt exclusion, keeping the wheel bearing protected from contaminates that could damage/ruin it. This saves costs as it keeps the bearing from needing to be replaced.
  • Machined rubber sealing Offers accuracy and consistency for a leak-proof seal, which retaining oil and grease and repelling water, preventing the bearing from rusting over..
Check Stock

AEM (30-3302) V2 Water/Methanol Injection Kit with Internal MAP Sensor

  • Boost Dependent controller features on-board MAP sensor with large adjustment knobs, integrated plug for harness connection, integrated fuse, covered status light and test button for enhanced splash resistance and mounting tabs.
  • Wiring harness is terminated with a positive-lock connector on one end with color-coded wires to ease installation, power and ground wires for the pump and additional wire for optional on/off fluid solenoid.
  • Pump does not cycle on/off and provides quiet, smooth operation.
  • it features robust construction including integral hose fittings, EPDM seals and a Santoprene diaphragm that provides consistent and reliable fluid delivery.
  • Precision-machined billet-aluminum injector with integral check valve.
  • three interchangeable injector nozzles to cover a wide variety of HP levels (250cc/min, 500cc/min and 1,000cc/min).
  • tank-less 35 PSI Boost dependent gas water/methanol system.
Check Stock

DW Performance Series 4-Piece Shell Pack with 22 Inches Bass Drum - Gold Sparkle FinishPly

  • 4-piece Maple Shell Pack with 10" and 12" Toms, 16" Floor Tom, and 22" Bass Drum - Gold Sparkle FinishPly.
  • Performance Series Bass Drum - 18 x 22 inch - Gold Sparkle FinishPly: 22" Maple Bass Drum with Maple Hoops - Gold Sparkle FinishPly.
  • Performance Series Floor Tom - 14 x 16 inch - Gold Sparkle FinishPly: 16" Maple Floor Tom with 2.3mm Triple-flanged Hoops - Gold Sparkle FinishPly.
  • Performance Series Mounted Tom - 9 x 12 inch - Gold Sparkle FinishPly: 12" Maple Tom with 2.3mm Triple-flanged Hoops - Gold Sparkle FinishPly.
  • Performance Series Mounted Tom - 8 x 10 inch - Gold Sparkle FinishPly: 10" Maple Tom with 1.6mm Triple-flanged Hoops - Gold Sparkle FinishPly.
Check Stock

WJB WS9150S Oil and Wheel Seal Replaces 9150S

  • The flanged design allows for an easier and secure installation. This ensures a longer service life for the bearing.
  • Outside ridges of the seal offer a secure and proper fit within the bearing.
  • Enhanced performance in a wide range of temperatures and fluid environments allows for increased reliability for wheel end performance.
  • An extra dust lip Offers enhanced dirt exclusion, keeping the wheel bearing protected from contaminates that could damage/ruin it. This saves costs as it keeps the bearing from needing to be replaced.
  • Machined rubber sealing Offers accuracy and consistency for a leak-proof seal, which retaining oil and grease and repelling water, preventing the bearing from rusting over..
Check Stock

MJR Tumblers 12 LB Rock Tumbler Awarded Best High End, Most Versatile Run 5 Dif Barrel Combinations

  • Award winning BEST HIGH END TUMBLER for 2019. MOST VERSATILE on the market with 5 different barrel combinations possible!.
  • Heavy duty 16 gauge welded steel frame, powder coated to be scratch and corrosion resistant. Rubber coated 3/8" diameter steel rollers.
  • Industrial duty flanged STAINLESS STEEL BALL BEARINGS (no plastic sleeve bearings to wear out).
  • Heavy duty motor with automatic thermo overload protection - intended for continuous use.
  • Commercial grade barrel that seals to be water and air tight, tapered neck for easy loading and unloading.
Check Stock

MOSNAI Golf Cart Front End King Pin Repair Kit for Club Car DS 1981-Up Gas/Electric Golf Cart OEM# 1016386/1010150/1016389/8067/7048（Pack of 2）

  • ✅【Fit Models】The front end king pin repair kit for Club Car DS 1981-up G&E Golf Cart, fit Delta A plate + nut..
  • ✅【Replace OEM Part】Brand new king pin assembly 1016386, Upper Spindle Bushings 8067, Lower Bushing Flanged 7048, Thrust Bearing Washer 1010150, Kin Pin Wave Washers 1016389..
  • ✅【Function】This king pin repair kit will do your whole cart, for both the driver and passenger sides.Perfect fit, directly replaces worn out original king pins, could improve the front end performance a lot..
  • ✅【High Quality】 Well made, meets OEM specifications, please carefully check the year, model and serial number of your golf cart before purchasing..
  • ✅【Package Content】 2 x DS King Pin Assembly, 2x Upper Spindle Bushings, 2x Lower Spindle Bushings, 2x Thrust Bearing Washer, 2x Kin Pin Wave Washers,2 x Hex Locking Nut..
Check Stock

TRELC Antislip Bicycle Handlebars Grips Protector For Bicycle/ Mountain Bike/ Road Bike/ Folding Bike (Black+Grey)

  • 【Comfortable】 Made of TPR rubber material, soft and comfortable, which can increase the shockproof effect and avoid palm and finger paralysis and pain in long-distance riding..
  • 【Ergonomic Designed】 Increase contact surface area for hand placement and support the wrist when holding onto the grip, which will minimize the fatigue of your hands. Suitable for long time cycling..
  • 【Easy to Install】 Quick and easy installation, just slide the bike handlebar grips onto your bike. NO other tools needed..
  • 【Integral Bar Plug】 According to the advise of our customers, we upgraded the handle grip to a integral bar, so you never worry about the end caps falling out. Effectively prevent dust, rain, debris..
  • 【Fits Most Handle Bar】 Fits for most handle bar with diameter of 0.87 inches(22.2mm), such as BMX, mountain bikes, MTB, scooter, folding bikes, e-bikes, road bikes, commuter bicycle etc..
Check Stock

15 Amp Flanged Inlet, TOVEN 125V RV Shore Power Inlet NEMA 5-15 Plug RV Receptacle with Waterproof Integrated 18\ Extension Cord & Cover Marine Electrical Inlet ETL Approved

  • 【15 Amp Flanged Inlet】: The flanged inlet material is premium copper and black nylon plastic. None oxidation for the copper pole on the plug. It can avoid ultraviolet degradation and Rain erosion. It is very sturdy and durable, which can work perfectly both indoor and outdoor.
  • 【Weatherproof Design】: Our 15 amp inlet is ETL approved, which means it is the safest quality. The newest weatherproof design back cover will protect it from rainstorms, snow, dust and even works well without crack and leak in the coldest winters..
  • 【Widely Compatible】: This shore power inlet Is a generator or battery charger plug to energize your several electrical devices and electrical appliances at the same time. Widely used in the RV, trailer, camper, car, boat, marine, block heater, home, recessed outlet box, etc.
  • 【Easy Installation】: The flanged power inlet needs 1-3 / 4" hole size, use 4 stainless steel screws (package Include) to firmly fix the straight blade flange entrance on the wall. The male receptacle was equipped with 14AWG 18 inch extension cable. Just need to plug in to connect the power..
  • 【The Wire Up As You Wish】: Choose the length and diameter of the cord based on your need. The Flanged electrical inlet receptacle accommodates 12-18 AWG gauge....
Check Stock

Sawtooth Command Series 5-Piece Drum Set Shell Pack White

  • 22"x18" Bass Drum w/NO Tom Mounts, 12"x9" Tom Drum, 13"x10" Tom, 16"x16" Floor Tom Drum, 14"x5.5" Snare Drum.
  • Select 6-ply poplar shells produce a classic warm punchy tone with live sonic lows. 1.6mm steel Triple Flanged hoops on toms, and snare. Adjustable Bass Drum riser included.
  • Upgraded appointments include 9-ply Birch bass drum hoops with wrap inlays, sleek zinc ball end/steel tube shell lugs & heavy duty tom suspension shock mounts with mounting hardware.
  • All kits include virgin bass drums with Telescopic Bass Drum Spurs. 7 mil textured coated batter heads on Snare and toms. 7 mil clear resonant heads on toms. 7 mil Clear batter heads on bass drum and 7 mil coated resonant batter.
Check Stock