Top Integrated Float Switch Condensate Pump

SANIFLO Sanicondens Condensate Pump - Residential & Commercial

  • PUMP, PUMP & AWAY: The Sanicondens is a small pump used to pump condensate from condensing boilers, HVAC systems, water heater systems, etc. The Sanicondens will pump condensate waste up to 15 feet in height and/or 150 feet away from a soil stack..
  • READY TO GO: The powerful pumping unit can be floor or wall mounted. It comes with an already-to-wire connection to an external overflow switch that will shut down the appliance or alert of overflow and includes all necessary hardware for install..
  • SMALL BUT POWERFUL: One of the most powerful and quiet condensate pumps on the market with features that will ensure your appliances will remain in a healthy state with minimal maintenance..
  • TECHNICAL SPECIFICATIONS: Motor: 1/30 HP oil-filled thermally protected.
  • Connections: Condensing boiler, HVAC systems, air conditioners.
  • 3 YEAR WARRANTY: All of Saniflo's products have a 2 year warranty with purchase, and an extended year with registration. Our warranty program can offer peace of mi....
Check Stock

Wayne WSSM40V 1/2 hp Combination Primary and Backup Sump Pump System

  • 120 volt primary pump - 1/2 hp pumps up to 4200 gph at 0'.
  • Tested to 1 million cycles* (Primary only). Integrated vertical float switch with solid, leak free polypropylene float for automatic operation, 9 inch ON level and 4 inch OFF level.
  • Primary pump's top suction design filters debris and minimizes clogging.
  • Alarm system, with status indicator lights, lets homeowner know when back-up system is active.
  • Designed for 15" diameter or larger sump basins.
  • 12 volt back-up pump pumps up to 3300 gph at 0'.
Check Stock

Little Giant VCL-24ULS 115 Volt, 1/18 HP, 270 GPH, Automatic Condensate Removal Pump with 1-Gallon Tank and Safety Switch, 6-Ft. Cord, Black, 553211

  • LARGE TANK CONDENSATE PUMP: Little Giant VCL-24ULS (553201) 1/18HP Condensate removal pump features safety switch, 1-gallon ABS plastic tank and 6-ft. power cord.
  • PUMP WITH SAFETY SWITCH: Includes safety switch which can be connected to shut down the air conditioner condenser or wired to an alarm to warn of possible tank overflow.
  • CONSTRUCTION: ABS pump housing, switch housing and tank.
  • HIGH PERFORMANCE MOTOR: 115 Volt, 1/18 HP, thermally protected, fan-cooled concentric motor with stainless steel motor shaft, 60 Hz, 2.5 Amps, 148 Watts.
  • SPECIFICATIONS: 1/4-inch FNPT x 3/8-inch O.D. barbed discharge suitable for 3/8-inch I.D. vinyl tubing.
  • 270 GPH at 1-ft. lift, 10.4 PSI, 6-ft. cord with 115-Volt plug.
Check Stock

Short-Pro Tool Replacement for Mars 8577 Zebra Short Finder PRO Tool 1 Pack.

  • HVAC Condensate Removal Pump With Automatic Switch – Automatically scans, detects, and collects/removes the condensate from HVAC or Air Conditioning Equipment, dehumidifiers, furnaces, condensing boilers, and virtually anywhere a condensing pump is necessary. Suitable for High Wall Mini Split Systems.
  • Pump Gallon is made of ABS plastic, Motor Shaft is made of High Quality Flame Retardant Metal that does not corrode, and the Tank Cover is also made of High Quality Flame Retardant Metal.
  • Pump includes Automatic Safety Switch which can be wired to an alarm to warn of possible tank overflow.
  • Voltage is 100-240V AC 50-60Hz – See below in description for all TECHNICAL SPECIFICATIONS.
  • 100% Satisfaction Guaranteed – Don’t worry you’re covered by our 100% money back guarantee no questions asked..
Check Stock

VEVOR Condensate Pump, 6.6 ft/2 m Lift, 110V Removal Drain Pump with 0.63 Qt/0.6 L Water Tank, 5W Automatic Condensation Pump with 100 L/H Flow, for Ice Maker Air Conditioner HVAC Dehumidifier Furnace

  • ...aches the lower probe, it will start working.
  • and when it is full of water, self-draining will be triggered. With a 1.0" (26 mm) water inlet and 0.4" (10 mm) outlet, it can be linked to your commercial ice makers or air conditioners with ease. Plus, a piece of drain hose is offered, and a 3.3 ft (1 m) power cord is integrated for working properly where there is a power supply..
  • Highly Adaptable Condensate Pump: This condensate pump is ideal for our commercial ice machines, whether countertop, under-counter, freestanding or split types. It is also suitable for water dispensers, 3-5P air conditioners, 1-3P central air conditioners, etc., and can be widely applied to homes, drink shops, offices, shopping malls, and so on..
Check Stock

Sauermann SI-30-230V Mini Condensate Removal Pump for up to 5.6 Ton Air Conditioners, 230V

  • HVAC Condensate Removal Pump With Automatic Switch – Automatically scans, detects, and collects/removes the condensate from HVAC or Air Conditioning Equipment, dehumidifiers, furnaces, condensing boilers, and virtually anywhere a condensing pump is necessary. Suitable for Ducted Units.
  • Pump Gallon is made of Flame Retardant ABS plastic, Motor Shaft is made of High Quality Flame Retardant Metal that does not corrode, and the Tank Cover is also made of High Quality Flame Retardant Metal.
  • Pump includes Automatic Safety Switch which can be wired to an alarm to warn of possible tank overflow.
  • Voltage is 115V/60Hz – See below in description for all TECHNICAL SPECIFICATIONS.
  • 100% Satisfaction Guaranteed – Don’t worry you’re covered by our 100% money back guarantee no questions asked..
Check Stock

HVAC Premium Condensate Removal Pump – Mute Box – Automatic Safety Switch Sensor - 100-240V AC 50-60Hz

  • HVAC Condensate Removal Pump With Automatic Switch – Automatically scans, detects, and collects/removes the condensate from HVAC or Air Conditioning Equipment, dehumidifiers, furnaces, condensing boilers, and virtually anywhere a condensing pump is necessary. Suitable for High Wall Mini Split Systems.
  • Pump Gallon is made of ABS plastic, Motor Shaft is made of High Quality Flame Retardant Metal that does not corrode, and the Tank Cover is also made of High Quality Flame Retardant Metal..
  • Pump includes Automatic Safety Switch which can be wired to an alarm to warn of possible tank overflow.
  • 100% Satisfaction Guaranteed – Don’t worry you’re covered by our 100% money back guarantee no questions asked..
Check Stock

Dayton 1TDT2 Blower, 549 CFM, 115V, 2.05 Amp, 1640 RPM

  • AUTOMATIC CONDENSATE PUMP: features a vertical-type switch to reduce footprint and is designed to automatically remove condensate produced by boilers, furnaces, air conditioners and de-humidifiers.
  • HIGH PERFORMANCE MOTOR: 1/30 HP, 1.5 Amps, 93 Watts, 115 Volts, 60 Hz, thermally protected, fan-cooled motor.
  • BUILT TO LAST:  stainless steel motor shaft, thermal overload protected motor.
  • CSA certified to US and Canadian standards.
  • PUMP WITH SAFETY SWITCH: can be connected to shut down the air conditioner condenser or wired to an alarm to warn of possible tank overflow.
  • SPECIFICATIONS: 3/8-inch OD barbed discharge, 80 GPH at 1-foot head, 20-foot shut-off, up to 8.7 PSI, 3 inlet drain holes, 6-foot cord.
  • maximum water temperature: 140 F, equipped with safety switch.
Check Stock

Float Switch for Sump Pump - 6-Foot Water Level Sensor with Honeywell Microswitch and Adjustable Tether Length for Ground Water Bilge Pump and Water Tank – Non-Corrosive PP Casing, Rated to 13 Amps

  • CONTROL WATER FLOW into and out of tanks and valves with a sump pump float switch by Water Boss. This float level switch helps reduce overflow potential of light to medium amounts of suspended solids..
  • HONEYWELL MICRO SWITCH ensures a high-precision sump pump switch with accurate repeatability and extended life. This water sensing switch is rated up to 13 amps or 1/2 HP and has CE and IEC approvals..
  • NON-CORROSIVE CASING of the Water Boss Float for water tanks and bilge pumps is IP68 rated. Rugged polypropylene construction also makes this water level switch temperature-resistant from 32°F to 140°F..
  • ADJUSTABLE TETHER of its 6-foot PVC jacketed cable makes our automatic bilge switch suitable for an array of applications. Eliminate complex automation with this sump pump replacement float switch..
  • 5-YEAR WARRANTY against manufacturer defects lets you select the Water Boss Sump Pump Float Switch Replacement with confidence. This reliable float switch yields big savings in flood repair costs..
Check Stock

Float Switch for Sump Pump - 10-Foot Water Level Sensor with Honeywell Microswitch and Adjustable Tether Length for Ground Water Bilge Pump and Water Tank – Non-Corrosive PP Casing, Rated to 13 Amps

  • CONTROL WATER FLOW into and out of tanks and valves with a sump pump float switch by Water Boss. This float level switch helps reduce overflow potential of light to medium amounts of suspended solids..
  • HONEYWELL MICRO SWITCH ensures a high-precision sump pump switch with accurate repeatability and extended life. This water sensing switch is rated up to 13 amps or 1/2 HP and has CE and IEC approvals..
  • NON-CORROSIVE CASING of the Water Boss Float for water tanks and bilge pumps is IP68 rated. Rugged polypropylene construction also makes this water level switch temperature-resistant from 32°F to 140°F..
  • ADJUSTABLE TETHER of its 10-foot PVC jacketed cable makes our automatic bilge switch suitable for an array of applications. Eliminate complex automation with this sump pump replacement float switch..
  • 5-YEAR WARRANTY against manufacturer defects lets you select the Water Boss Sump Pump Float Switch Replacement with confidence. This reliable float switch yields big savings in flood repair costs..
Check Stock

HVAC Premium Condensate Removal Pump – Tank Pump 1.1L RTP15WS115L with 3/8' x 15' Pipe – Automatic Safety Switch Sensor - 115V/60HZ

  • HVAC Condensate Removal Pump With Automatic Switch – Automatically scans, detects, and collects/removes the condensate from HVAC or Air Conditioning Equipment, dehumidifiers, furnaces, condensing boilers, and virtually anywhere a condensing pump is necessary. Suitable for Ducted Units.
  • Pump Gallon is made of Flame Retardant ABS plastic, Motor Shaft is made of High Quality Flame Retardant Metal that does not corrode, and the Tank Cover is also made of High Quality Flame Retardant Metal.
  • Pump includes Automatic Safety Switch which can be wired to an alarm to warn of possible tank overflow.
  • Voltage is 115V/60Hz – See below in description for all TECHNICAL SPECIFICATIONS.
  • 100% Satisfaction Guaranteed – Don’t worry you’re covered by our 100% money back guarantee no questions asked..
Check Stock

Attwood 4608-7 Tsunami T800 Bilge Pump, 800 GPH, 12-Volt, Barbed ¾-Inch Diameter Outlet, 29-Inch Wire

  • What you will get: the package contains 1 piece of 12 V boat bilge water pump and 1 piece of automatic boat bilge pump float switch, nice combination for you to drain the water easily.
  • Basic parameters: the flow of the pump is 1100 gallons per hour, the flow rate is 1100 GPH, the voltage is 12 V DC, and the head is 13 ft (4mts).
  • Outlet diameter: 1-1/8 inch/ 29 mm, cable length: 3.3 ft/ 1 m.
  • The float switch's max amps 12 volts: 20 A.
  • The wire length is 3.3 ft/ 1 m, the wire gauge size is 18 AWG.
  • Electric bilge pump: the electric bilge pump is great for you to drain water efficiently, which has a good motor and help drain the water efficiently.
  • It is a good forhydraulic systems fed with cold water and can be applied in line to be fed by gravity or pressure.
  • Automatic boat bilge pump float switch: the float swith is automatic, it will turn the boat bilge pump on when water level reaches 2 inch (51 mm), and it will turn the pump off when water level reaches 0.7 inch (19 mm).
  • It is good flow sensor for bilge pumps, and it features with a removable base for easy cleaning.
  • Wide range of application: the boat bilge pump and automatic float switch can be applied for fishing boats, cruisers, runabouts, yachts and mo....
Check Stock