Top Internal Coolant Bar Set

Qtqgoitem 1/4\ PT Thread Flexible 20mm Width Flat Nozzle Water Oil Coolant Pipe Navy Blue (Model: 75a a5e 657 e34 094)

  • Nozzle Width : Internal: 20mm/ 0.7"External: 23mm/ 0.9".
  • Package Content : 1 x Flexible Coolant Pipe.
Check Stock

ERGAOBOY 7 Pcs Air Conditioning Refrigerant Angled Compact Ball Valve Connector, 1/4\ ball valve and 5/16\ adapter for mini spilt system,fit for AC HVAC R12 R22 R410A R134A R502

  • Angled Ball Valve: The three color 1/4" male and female ball valve have 45 degree manual shut off valve,800 psi (55 bar) maximum working pressure and 4000 psi (276 bar) minimum burst pressure..
  • R410A Adapter: 1/4" Male to 5/16 " Female R410A refrigerant adapter,It can be easily connected to the accessories of 1/4" female connector in the mini split air-conditioning system..
  • Excellent Quality: Made of high quality soild brass,the 45-degree angle design is more sturdy and durable,the internal o-ring rubber can ensure the good sealing and leaking..
  • Wild Application: 3 pcs 1/4 Inch angle ball valve and 4 pcs 1/4" male to 5/16" female R410A adapter,suit for vehicles and air conditioner issues inspection,addition or recovery of coolant..
  • Quick Installation: Easy to install and connect, can quickly applied to the mini air conditioning system..
Check Stock

Corsair iCUE Commander PRO Smart RGB Lighting and Fan Speed Controller

  • The Corsair iCUE Commander PRO turns your case into a smart case, using Corsair iCUE software to control up to six case fans and two RGB lighting channels.
  • Powers up to six DC or PWM fans with voltage and PWM control, including the ability to run at zero RPM for total silence.
  • Two RGB lighting channels provide powerful software control of Corsair individually addressable RGB LED strips and Corsair RGB fans.
  • Four repositionable temperature sensors allow you to accurately monitor temperatures throughout your system with Corsair iCUE software.
  • Two USB 2.0 internal headers allow you to easily connect internal USB devices, such as a Corsair AXi Series PSU or motherboard front panel.
  • Set up custom fan curves and lighting profiles to automatically adjust fan speeds and RGB lighting based on system temperatures.
  • Powerful Corsair iCUE software brings everything together, allowing you to customize RGB lighting, monitor CPU and coolant temperatures and adjust fan speeds, all from a single intuitive interface.
  • Commander PRO’s low profile design and included adhesive backing makes it easy to install behind your motherboard, or on any flat surface inside your case.
Check Stock

Coolant Vacuum Refill Tool Kit Engine Cooling System Vacuum Purge & Refill Kit New Coolant Bleeder Kit with 4 Rubber Sleeves & 1 Universal Adapter Cone Plug (with Carrying Case) (4 Connectors)

  • VACUUM TYPE COOLANT FILLING FUNCTION: Pneumatic vacuum coolant filler first sucks and forms a vacuum on the cooling system by using shop air, then draws coolant into the cooling system.(Need vacuum pump and not included in the kit) Add coolant in vacuum, there is no large air pocket and avoid warping or other damage in engine. Normally, it takes 5-10mins to refill the coolant, the exact time depends on the size of the tank. Easy to operate and save time.
  • WIDELY USAGE RADIATOR PURGE AND ANTIFREEZE REFILL TOOL: JIFETOR antifreeze filler kit includes a universal tapered rubber adapter, with MIN. diameter 1.5CM and MAX. diameter 5CM, fits for almost all types of vehicles. The adapter can replace the radiator cap to seal the cooling system, and connect with the quick coupler on coolant refiller to help to fill antifreeze..
  • WATER TANK COOLANT VACUUM REFILL: Plastic covered premium brass manifold body, equipped with brass fittings, anti-corrosion and durable. The index range of gauge is -30~0inHg (-76~0cmHg), and normally -25~-20inHg is right time to add coolant. 18" rubber resin material weave reinforced hose, featured with anti-corrosion, low fluid resistance, high bearing pressure, ensure durability and good air sealing. Also there is a 21" metal chain hoo....
Check Stock

Jet Tools CS-315, 315mm 1-Phase Ferrous Manual Cold Saw (414229), Standard

  • DURABILITY: Blade drive reduction gearbox operates in an oil bath..
  • FLOOD COOLANT SYSTEM: 1-1/3 gallon coolant reservoir and pump with flow control system extends blade life..
  • REPEAT CUTS: Fully-adjustable material depth stop for sawing repeatability and increased production..
  • MAXIMUM TORQUE: Hardened and ground direct-drive worm shaft, and bronze worm wheel, transmits maximum torque to the saw blade..
  • BURR-FREE CUTTING: Quick-clamping cam-action vise with adjustable gib and material support bar..
Check Stock

957E10883 Fordson/Ford Dexta Tractor Coolant Water Temp Gauge for Dexta & super Dexta+

  • HIGH QUALITY: high-quality ABS material, strong, corrosion-resistant and durable. Long-term high water temperature will reduce the lubricating effect of the engine's lubricating oil, resulting in wear back damage to internal engine parts.
  • HIGH QUALITY: high-quality ABS material, strong, corrosion-resistant and durable....
Check Stock

OTC Water Pump Holding Tool

  • Coolant pressure tester kit includes 3 tools set, radiator leakage detector, coolant refill tool and thermometer. 17PCS specific adapters and 1 universal cone rubber adapter, to connect almost all types of radiator openings on the domestic and imported vehicles, help to check the leak of water tank and fill the coolant under vacuum environment. There are also 3PCS radiator cap adapters and 2PCS connectors for testing the leakage of the radiator caps..
  • Manual vacuum pump pressure checker uses high quality aluminium cylinder, much harder than regular plastic one. 21" long rubber hose, brass parts, anti-corrosion and durability. 3" large dials with color coded small scale range 0-35PSI, very easy to observe. Use the hand pump tester to pressurize the radiator/cap and observe whether the pointer drops over time to confirm a system leak..
  • Cooling system coolant filling manifold tool adopts superior brass manifold body with plastic cover, and 18" long rubber hose, brass parts for anti-corrosion and durability. The pneumatic vacuum refiller firstly uses the workshop air to pump the cooling system and form a vacuum, and then pumps the coolant into the system. Add coolant under vacuum environment, there is no large cavitation, avoid engine warping and other dam....
Check Stock

Part# 11531705210 11531705220 Engine Heater Pipe & Coolant Water Pipe For B-M-W 3 5 7 Series X3 X5 Z3 Z4 320Ci 323Ci 328Ci 330Ci 325xi 330xi 520i 525i 530i

  • Heater hoses are rubber hoses that circulate engine coolant to and from the heater core, which is the small radiator that provides heat for the cabin. The water pump sends coolant that’s been heated up by the engine to the heater core through the heater hoses. Heater hose runs from the water pump to the heater core, behind the firewall, and from the heater core back to the radiator. Without heater hoses, you’ve got no heat..
  • Coolant Hose is typically a rubber device that manages the coolant flow from an engine’s water pump to the heater. Coolant hose is an essential cooling system in your engine, which would not work without them. Engines produce a lot of heat and coolant hose carries the coolant through the engine at an optimal temperature, cool the engine. It would quickly destroy the engine if left the heat to build up in it..
  • This hose set fits for 2000 B-M-W 323Ci, 1999 B-M-W 323i Chassis: E46, 2000 B-M-W 323i, 2001 - 2006 B-M-W 325Ci, 2001 - 2005 B-M-W 325i , 2001 - 2005 B-M-W 325xi, 2000 B-M-W 328Ci, 1999 B-M-W 328i Chassis: E46, 2000 B-M-W 328i, 2001 - 2006 B-M-W 330Ci, 2001 - 2005 B-M-W 330i, 2001 - 2005 B-M-W 330xi, 2001 - 2003 B-M-W 525i..
  • This hose set fits for 1997 - 2000 B-M-W 528i, 2001 - 2003 B-M-W 530i, 2001 - 2006 B-M-W X5 3.0i, ....
Check Stock

Radiator Overflow Tank 2L Universal Coolant Overflow Tank Aluminum Radiator Overflow Tank Visible Coolant Level Radiator Expansion Tank Used To Prevent Coolant Leakage Coolant Recovery Tank

  • 1.[Coolant Reservoir Tank For Car Engine Maintenance]: Universal overflow resivior can be used as an exhaust gas engine oil pot and an overflow pot....
  • 2.[ Radiator Rreservoir Tank With Simple Working Principle ]When the pressure of the coolant in the radiator exceeds the set value of the pressure....
  • 3.[ Coolant Overflow Tank With A Wide Range Of Applications ]: The radiator overflow tank is highly compatible and compatible with most cars. Please....
  • 4.[ High-quality and easy-to-install Radiator Overflow Tank ]: The coolant overflow tank is made of aluminum and is very durable. It can also prevent....
  • 5.[ Large Capacity & Accurately Designed Radiator Expansion Tank ]: The capacity of the coolant overflow tank is 2L, which is twice that of the....
Check Stock

Rev9 ICK-046 made for Subaru Impreza WRX/WRX STI 2002-07 Front Mount Intercooler Kit Gen 2

  • This will fit: 2002 2003 2004 2005 2006 2007 Subaru WRX / STi (all turbo models).
  • 6 x pieces polish aluminum pipe set up 9 x polyester reinforced High temperature silicone hose 17 x T-Bolt Clamp 1 x coolant overflow tank 1 x intake....
  • INTERCOOLER SPECS: bar & plate design for better cooling efficiency max horsepower capacity: 300-550hp core length: 28" core height: 9 1/2" core....
  • NOTE: You can keep the factory foglights with this kit.
Check Stock

Micro 100 20-0821 Boring Tool - Indexable, 0.330\ Min Bore Dia, 0.177\ Offset, 1/4\ Shank Dia, 3.100\ OAL, Insert Part #50-1100, A04F SCLCR 2 Holder Nomenclature,

  • Coolant through boring bar for right hand boring and facing with 5° approach (lead) angle.
  • Made from precision ground heat treated steel.
  • Coolant through design for improved chip removal.
Check Stock

Super Stars 35Pcs Radiator Pressure Tester, Pneumatic Vacuum Coolant Refill Tool Automotive Kit, Test Cooling Systems for Leaks

  • Best tool to test any leaks in radiator, change coolant, quick refill the vehicle cooling system and remove air pockets. This 35pcs Coolant system leak checker and filling tool set is your must have kit..
  • The radiator pressure tester pressurize on the reservoir, and watch for pointer drop over time to confirm system leak down. Large pump capacity reduces strokes required to pressurize cooling systems, also prevents air pockets that can lead to hot spots in the cooling system..
  • Drastically reduces the time it takes to fill cooling system. Features include a thumb-operated relief valve for quick and easy pressure release and self-locking quick-disconnecting components..
  • 35 Pieces: include durable exact size of nylon testing caps, rust-proof copper connectors, clear gauge reading, high-quality rubber and metal adapters all included in one red molded case, easy to organize, use and carry. American & European styles air plugs are included for you to choose. Suitable for most domestic and import vehicles..
  • AVOID OVER PRESSURIZE THE RADIATOR. Ideal readings should range between 15-20PSI (1.03-1.37BAR). a) Gauge holds steady – If gauge hand holds at the same pressure number for 2 minutes, there are no serious leaks in the system. b) Gauge drops slowly – Indi....
Check Stock