Top Internal Power Board

Genuine Dell Optiplex 980 Small Form Factor (SFF) System Motherboard Mainboard Systemboard, Compatible Part Number: C522T

  • ...anel - two connectors, USB - Back panel -six connectors, Video - one 15-hole VGA connector one 20-pin DisplayPort connector.
  • System Board Connections: one 120-pin connector PCI Express x16 data width (maximum), one 164-pin connector Express Lane, Serial ATA - three 7-pin connectors, Memory - four 240-pin connectors, Internal USB - one 10-pin connector (supports two USB ports), Processor fan - one 5-pin connector, Front I/O - one 26-pin connector, Front panel control - one 14-pin connector, Processor - one 1156-pin connector, Power 12V - one 4-pin connector, Power - one 24-pin connector, Internal serial card - one 14-pin connector, Internal speaker - one 5-pin connector, PCI Express x1 (wireless card) - one 36-pin connector, Thermal sensor - one 2-pin connector, Intruder connector - one 3-pin connector.
Check Stock

MXL Revelation II Flagship Variable Polar Pattern Tube Microphone

  • Tuned for a “classic” frequency response through the flagship tube microphone.
  • Has limitless pickup patterns through the variable pattern control.
  • EF86 Pentode tube and internal Mogami wiring for top performance.
  • Versatile across the board for recording vocals or instruments.
  • Comes with a Mogami 7-pin cable, XLR Mic Cable, Power Supply, Shock mount, Microfiber Cleaning Cloth, and an Aluminum Flight Case to store.
Check Stock

5.11 Range Ready Trainer Duffel Organizer Pistol Range Bag, Style 56567, Kangaroo

  • The Range Ready Trainer Bag has space to hold everything you need for a day at the range. Fully padded with a PE board base to keep your gear safe while the removable dividers let you customize the bag..
  • This bag has large loop front panel for patches/ID, left side pull down pouch with internal org, name tape, and dual rear zippered pouches.
  • The Range Ready Trainer bag has quick access front internal elastic mag/accessory panel, internal removable dividers and elastic bands..
  • Internal quick access elastic mag and accessory panel as well as elastic loops under the lid give you the ability to carry loaded anywhere you go and that's just the main compartment. Three side compartments and MOLLE webbing let you take even more.
  • It comes fully padded construction with PE board base and underside lid elastic bands and YKK lockable zippers.
Check Stock

HiFiBerry HighPi Raspberry Pi Case - Raspberry Pi4

  • ... assembly. One snap action locks the Pi board into the case.
  • the second secures the lid, rattle free. Remove the Pi board and the lid with one-finger-releases for each. Genius!.
  • Fits All Kinds of Hats - Whether you’re running a plain Pi4 board or modding it to the max, the HighPi case has your Pi covered. Generous internal room allows HATs, break-out boards, or heat sinks. Vents on three sides double as fly-through cable ports for the GPIO and whatever else you need to connect to. Supports PI POE Hat, HiFiBerry Hats, Serial Hat, UPS HAT and more!.
  • The HighPi case can be wall mounted horizontally with two screws for easy removal, or mounted in any orientation including upside-down with four screws from inside the case (Screws not included). When wall mounted horizontally, the A/V and audio cables hang downward from the Pi, improving visual tidiness and reducing the need for support of heavy cables..
  • High quality ABS plastic case, designed and made in Canada, Large internal volume for HATs, break-out boards, or heat sinks, Vents on three sides double as fly-through cable ports, Self-adhesive rubber feet included, set of 4, Matte finish hides fingerprints.
  • External dimensions: 97 x 66 x 41mm, Internal volume for breakout boards: 90 x 60 x 28.8mm.
Check Stock

Level Best

  • Great Value Diamond Painting Kit: Total 170 pieces diamond painting tools, included A4 LED light board pad, girds diamond painting storage, felt held bag, stand and other diamond painting accessories, such as roller, diamond sticky pen, plastic plates and diamond painting fix tool.
  • A4 LED Light Pad: Low-middle-high level- three levels to adjust brightness by pressing the button. Flicker-free and eco-friendly LED, advanced eyesight-protected technology, do not hurt eyes after long-hour working. Touch on/ off switch and adjustable brightness.
  • 80 Grids Storage Box: A storage container with 80 grids. It not only can store diamond beads, but also can store diamond painting tools.
  • Portable Hand-Held Bag Design: It is convenient to carry diamond painting light pad with tools everywhere. There is internal divider design for led light pad, extra side pocket gives big space to store power adapters, power banks, cables or notepads.
  • Great Gift: A full and great value diamond painting tools accessories set for beginners and amateur, also a good choice for gift giving.
Check Stock

Rowin PW-1 Guitar Pedal Power Supply 10 Isolated DC Output for 9V/12V/18V Guitar Bass Effect Pedals with USB Charging port for iPhone iPad Tablet

  • 【10 Isolated Outputs】 7 x 9V 100mA, 1 x 9V 500mA, 1 x 12V 100mA, 1 x 18V 100mA, 1 x 5V 1A USB, DC 18V input, power adapter must be negative internal and positive external..
  • 【Short Circuit/Overcurrent Protection】 In case that the socket is plugged into a short-circuit device or the current is overloaded, it will stop providing power. Once the equipment is disconnected from power, the socket will resume..
  • 【Power Status Indicator Lights】 Bright Blue LED for pedal board lighting and short circuit indicating..
  • 【Material】 This pedal power supply is made of high quality aluminum alloy, built-in USB charging for iPhine, iPad, Android, Tablet, Charging your devices anywhere anytime on your side..
  • 【Package/Warranty】 1 x Rowin PW-01 Guitar Pedal Power Supply, 1 x Power Adapter, 8 x 55cm Cables, 2 x 20cm Polarity Conversion Cables, 1 x User Manual. 1 Year unconditionally refund or resend.We promise 100% friendly customer service and satisfaction..
Check Stock

[Upgrade Version] 2022 EDGB Max+ Power Saving Flash Cart+ Game Cartridge Card For Gameboy GBA GBASP GBC GBP GB Series Game Consoles Service

  • NEW Version 2022- “Everdrive GB MAX".Internal On-board micro key, high reliable and One press back to Menu, no need to power off..
  • Very low power comsuption flashcart, works with IPS backlight MOD console..
  • High quality re-design PCB and FPGAs，OS V4 with swap key（A and B）and higher compatibility than Old OS V1..
  • Improved LED indicator，not dazzling again than other old flash cart..
  • Note：Flashing in unauthorized firmware is not covered by the warranty..
Check Stock

BAMF 4-Way Coax Cable Splitter Bi-Directional MoCA 5-2300MHz

  • 5-2300 MHz (2.3Ghz) RF bi-directional digital Coax/ coaxial cable Splitter for CATV and satellite and great for Mocha.
  • Internal circuit board for better reliability/durability. Outside is weather resistant design for keeping elements out.
  • Low signal loss of only 7dB on each output port improving performance and speeds.
  • All ports are power passing for easy satellite Connection.
  • High shielding structure lowers digital noise and improves signal quality, reducing packet loss for modems, and for all other devices.
Check Stock

AC 50-220V 2000W 25A Motor Speed Controller SCR High-power Electronic Voltage Regulator Module Motor LED Dimmerswith Speed Control Knob(5pcs)

  • Material: made of electronic components, internal conductor: pure copper..
  • Features: The module uses thyristors, with a withstand voltage of up to 1200V. The regulator has a peak voltage absorption circuit, which can effectively protect high-power thyristors, has a long service life and is more durable. High-quality CBB capacitors can withstand 630V DC withstand voltage..
  • Note: The module is connected to an AC voltage of 220V, so safety must be paid attention to during the debugging process to prevent electric shock accidents..
  • Specification size: high temperature resistant FR-4 circuit board circuit board 35MM * 48MM, external size: 48MM * 60MM (knob direction) * 26MM (height).
  • Package contains: 5 * 50-220V 25A AC motor speed regulator.
Check Stock

BAMF 3-Way Coax Cable Splitter Bi-Directional MoCA 5-2300MHz

  • 5-2300 MHz (2.3GHz) RF Bi-Directional Digital Coax/ Coaxial Cable Splitter for CATV and Satellite and great for MoCa.
  • Internal circuit board for better reliability/durability. Outside is weather resistant design for keeping elements out.
  • Low signal loss of only 5.5db on each output port improving performance and speeds.
  • All Ports are Power passing for easy Satellite connection, Also works great for Cameras, and for Amplifiers.
  • High shielding structure lowers digital noise and improves signal quality, reducing packet loss for Modems, and for all other Devices.
Check Stock

AirDiff 2-Way TV Antenna Coaxial Cable Splitter,High Performance with Low Loss in db AC Current Support

  • 5-2400 Mhz RF Bi-Directional Digital Coax Cable Splitter for Cable Television, VCR, Satellite Receiver, Cable Box, Antennas, into multiple outgoing....
  • Low signal loss at 3.5 db for one each output port, improving proformance and speeds.
  • Internal Circuit Board for better reliability / durability. Outside is weather resistant design..
  • All parts are Power Passing for easy Satellite connection.
Check Stock

New SKAR Audio RP-2000.1D 2800 WATT MAX Power Class D MONOBLOCK SUB Amplifier

  • ...his amplifier exemplifies its high quality engineering. This amp is rated at a conservative 2,000 watts RMS power at a 1 ohm operating load, and is capable of putting out over 2,800 watts max power at 1 ohm..
  • Featuring a high speed MOSFET power supply, 4-way protection circuitry, advanced PCB board design, and other internal high quality components, the RP-2000.1D outperforms anything else in its class when it comes to power and reliability. This amplifier comes with a bass knob & remote wire allowing the user full control over their bass from the front of the vehicle. This makes for a great amplifier when looking for serious power to get your system loud, and will work great on a single subwoofer a.
  • Skar Audio RP-2000.1D Monoblock Car Subwoofer Amplifier 1 Ohm Stable Class D Monoblock Subwoofer Amplifier 4 Way Protection Circuitry: Thermal, Voltage, Speaker, DC RMS Power @ 4 Ohms: 800 Watts x 1 Channel (14.4v) RMS Power @ 2 Ohms: 1,400 Watts x 1 Channel (14.4v).
  • RMS Power @ 1 Ohm : 2,000 Watts x 1 Channel (14.4v) Max Power @ 1 Ohm: 2,800 Watts x 1 Channel (14.4v) MOSFET Power Supply Soft Turn on Circuit Frequency Response: 20Hz~250Hz Signal to Noise Ratio: 85dB.
  • Damping Factor: 150< Low Pass Filter (Variable): 50Hz~220hz Subsonic Filter: Off~50Hz Remote....
Check Stock