Top Ir Emitter Cable

Sewell SW-32988 Direct BlastIR Wireless Pro IR Repeater, Remote Control Extender Kit (IR Emitter and Receiver),Black

• Note Some devices use RF instead of IR for remote control. The Blast IR Wireless Pro only works with IR devices. Please check the signal type of your remote to ensure it is IR before ordering. .Wireless Distance: 200m (650 ft.), distance may vary due to obstacles, IR Receiver Distance: 7m (30 ft.)Incompatibility : Yamaha HTR 6140, Arris DCX 3520E-M, OSD ATM-7 Speaker Selector.
• BlastIR Pro receivers are directional and require facing the receiver towards where you will be using the remote. To improve reception and widen the angle of control, we recommend using the included IR receiver cable connected to the main receiver unit..
• BlastIR Pro Emitters work best when placed within a few inches of the devices you want to control. For best results we recommend attaching the included optional IR emitter cables so that the emitter is directly over the IR receiver of up to two devices. These are designed to stick directly to the devices that you are trying to control rather than sitting in front of them..
• Included USB and AC power cables, extra IR cables, mounting adhesive, and rubber feet..
• Wireless Distance: 200m (650 ft.), distance may vary due to obstacles, IR Receiver Distance: 7m (30 ft.).

uxcell IR Infrared Emitter Extension Cable 4.9ft Long 45 Degree Emission Angle 3.5mm Jack Single Red Head 2pcs

• Works with all 38-56kHz IR remote control and devices with an IR input port..
• Low current drive, low power consumption, long launch distance, small size installed..
• Applied to infrared forwarding equipment, audio and video transmission equipment, IR remote wireless transceiver, centralized control equipment, etc..
• Please note that the infrared emitter head is glued to the side of the infrared receiver tube, do not cover it, otherwise the device will not be used, and it will be insensitive to remote control by remote control..

WenkeDigi IR Infrared Repeater System kit, IR Repeater Extender, Max 100 Feet Efficient Receiver Range - IR Remote Control Hidden Devices -10 Feet IR Receiver Cable (Can Run 400 Feet by Your Cat5e)

• This IR kit is a device that only passes on the infrared signal . It is used to control Four (4) IR devices out of sight that are kept in a closed cabinet or in anther room ( expandable up to 18, and 4 x single emitter provided in the package , Additional IR Emitters sold separately, One emitter one device ) . Strong Compatibly , It is compatible with almost all the IR electronic appliances like SKY STB and CISCO DVD player , SONY receivers ,Amplifier, Xbox, TV , Blu-ray player,etc with its wide frequency range 20 KHz to 60KHz ..
• Mini Block Size , Dual Sensors Mini Bar IR receiver , One Sensor 38KHz , the Other 56KHz, with long effective remote control distance up to 100 FEET @38KHz and 23 FEET at 56KHz , High sensitivity, Real time transmission without any delay . It allows you to control your home theater with your existing IR remote controller. NOTE : NOT support RF and Bluetooth Remote Control ..
• This IR Repeater system kit supplies with an ideal solution for those who want to conceal their A/V components equipment inside a entertainment system cabinet or closet door for a clean, stylish look. It makes it possible to control multiple IR devices while these are in a closed cupboard or in a remote location out of sight ..

USB Powered Infrared Repeater Hide Your Set top Box

DEMAO ir Repeater Kit ，ir Extender ，Infrared Repeater System Kit Remote Controls Home Theater Out of Sight .Control 1 DMIR0106TA Ir Repearter Kit

• ...l block , sold separately, will also be required that the IR receiver will then plug into..
• 3） Connection without having to install the software, simple and convenient for you to achieve Remote Control. This product allows you to control A/V equipment with your existing IR remote controller..
• 4）Use Double IR Emitter x 6pcs，expandable up to 12.Use Triple IR Emitter x 6pcs，expandable up to 18. .Home theater devices kept in a closed cabinet or in another room with this IR Infrared Remote Control Extender Repeater System. Additional IR Emitters sold separately . It is compatible with almost all the IR electronic appliances in the market with its wide frequency range 20 KHz to 60KHz , especially works with SKY set-top box and Cisco DVD player ( support RCMM code ) ..
• 5) PACKAGE INCLUDE: 1x IR Connecting Block, 4x IR Emitters , 1x Dual Band Mini IR Receiver, 1x Power Supply, 2x Mounting Screws and 1x Manual..

ENSIGEAR IR Repeater Kit, ir repeater system，IR Remote Control Extender Remote ，Control 1 to 18Devices.IR Extender 100 Feet，20KHz-60KHz Dual Sensors Mini Receiver,Super compatibility

• ...l block , sold separately, will also be required that the IR receiver will then plug into..
• 3） Connection without having to install the software, simple and convenient for you to achieve Remote Control. This product allows you to control A/V equipment with your existing IR remote controller..
• 4）Use Double IR Emitter x 6pcs，expandable up to 12.Use Triple IR Emitter x 6pcs，expandable up to 18. .Home theater devices kept in a closed cabinet or in another room with this IR Infrared Remote Control Extender Repeater System. Additional IR Emitters sold separately . It is compatible with almost all the IR electronic appliances in the market with its wide frequency range 20 KHz to 60KHz , especially works with SKY set-top box and Cisco DVD player ( support RCMM code ) ..
• 5) PACKAGE INCLUDE: 1x IR Connecting Block, 4x IR Emitters , 1x Dual Band Mini IR Receiver, 1x Power Supply, 2x Mounting Screws and 1x Manual..

TNP IR Infrared Remote Control Extender Repeater Cable (8.2 Feet) - IR Signal Receiver & IR Emitter Blaster Extension Cable Wire Cord USB Powered System Kit

• IR remote control cable extends the signal to a video source like a Blu-ray player, DVD player, STB box, AV receiver or other A/V source with an infrared sensor so it can be controlled from your HDTV.
• Simple installation IR Repeater cable allows you to control home theater components located behind closet cabinet doors.
• Place the IR emitter blaster near the source sensor to repeat the signal to the source.
• Place the IR Receiver in a convenient location with line of sight of your hand-held remote.
• IR Tx and Rx cables have adhesive circles on the back for mounting.
• USB powered IR extension cable has an integrated 6 foot Y-cable to receive 5V USB power.
• Connect to an HDTV USB port or to a USB wall charger power supply (sold separately).
• Compatible with most A/V equipment with infrared sensors (not RF).

Nextgen IR Extender - Infrared Remote Control Distance Extender Kit - IR Repeater Kit with IR Emitter - IR Receiver Extender Controls All Your Home’s Remote Signal Devices - Hide Cable Box and Wires

• ...e and voice remote pro) control TV, cable box, , receiver, amp, Blu-ray player, and controlling various IR-controlled devices to extend distance and versatility..
• KIT INCLUDES - 1 x IR receiver extender with built in power cell charger. 1 x Power adapter. 1 x Single eye IR emitter. 1 x Transmitter. 1 x Transmitter adapter for AA compartments. 2 x power rechargeable power cells..
• MORE CONTROL FOR TV - Wield greater control over your TV volume and channel changing ability. Use it as a wireless cable TV extender to change the channel or adjust the volume from any room, including downstairs to upstairs. Works with all AA and AAA remotes..
• 100 FT. RANGE THROUGH WALLS - IR remote control extender transmits your remote's signal up to 100 feet through walls, floors, windows, and doors offering limitless control, even from outdoors. Serious performance with zero lag and impressive user-friendly functionality..
• EASY TO INSTALL - Place the receiver in front of the component you wish to control or attach the bright eye emitter to it. Then simply replace one of the AA or AAA batteries....

Xantech DL95K Universal Dinky Link Extended Range IR Kit

• Low profile and easy to hide, it works with all types of cable boxes, satellite boxes, and TVs.
• Proprietary ambient noise-suppression technology for reliable operation in any lighting environment including compact fluorescents.
• IR modulation frequency bandwidth: 25-60kHz.
• Reception range: up to 120 ft (36m) depending on conditions.
• Color-coded connectors for fast, easy installation.
• Kit includes DL95 IR receiver, Model 789-44 connecting block that connects one IR receiver to four IR emitter ports (can drive up to four dual....

SZBJ IR Infrared Extension Cable for Extending IR Receiver Emitter Stereo Cables 49 ft

• Length: 49 ft. It can be used with IR receiver or IR emitter.
• Connector Type: 3.5mm Stereo Male / 3.5mm Stereo Female.
• Remote Extension Cable for LANC, DVX and Control-L Cameras and Camcorders from Canon, Sony, JVC, Panasonic.
• Jacket Material: PVC Note: Only compatible with devices with a 3.5 mm IR port, some IR devices may use different connections. Known devices with....

TNP IR Emitter - Dual Head Infrared Remote Cable Extender (10 Feet 3 Meters) - 3.5mm Infrared Jack IR Extender for Xbox IR Repeater Kit System, IR Range 38kHz to 56kHz

• Extend remote control ability to any room in the house, hidden Xbox One, AV receiver and compatible with devices in 38khz. PLEASE NOTE: Please confirm if this device suitable for your machine. Any problem please contact us first. We will resolve..
• The Infrared Emitter Extension Cable comes with adhesive backing sticks directly onto different devices.
• For use with infrared extender extension system, Xbox One, IR Connecting Blocks and Home Automation controllers.
• Overall length of Infrared Emitter Extender: 5 feet (1.5 meter),and 3.5mm port.
• Passes IR communication: Used with an IR Repeater kit to control a device.
• Extend remote control ability to any room in the house.

IR Infrared Emitter Extender Cable Extension Single HeadEye 3.5mm Jack Infrared Red Transmitter Blaster Eye Wire Cord Compatible with IR Repeater Extender System Kit, Xbox One (IR-1.5m)

• Extend remote control ability to any room in the house, hidden Xbox One, AV receiver and compatible with devices in 38khz. PLEASE NOTE: Please confirm if this device suitable for your machine. Any problem please contact us first. We will resolve..
• The Infrared Emitter Extension Cable comes with adhesive backing sticks directly onto different devices.
• For use with infrared extender extension system, Xbox One, IR Connecting Blocks and Home Automation controllers.
• Overall length of Infrared Emitter Extender: 5 feet (1.5 meter),and 3.5mm port.
• Passes IR communication: Used with an IR Repeater kit to control a device.
• Extend remote control ability to any room in the house.