Top Iron Studs Applying Machine

Customadeonly 2pcs HubCentric Wheel Spacers 5X120 | 64.1 mm CB | 14X1.5 Thread | 25mm 1 Inch. Compatible for ZDX, RLX, TL, Civic Type R,Ridgeline, MDX, Odyssey

  • Please be sure to confirm the fitment & compatibility prior to purchase - If you are not sure if this is applicable to your vehicle -please feel free to ask us! Fits 2010-2013 ZDX, 2013-2017 RLX,2009-2014 TL, 2017-2018 Civic Type R, 2016-2018 Ridgeline, 2014-2018 MDX, 2013-2018 Odyssey.
  • QTY: 2 Wheel Spacers .Designed to improve the handling & appearance of your vehicle.
  • Made with high grade T-6 Aluminum - CNC machined with precised fit.
  • Carbon steel wheel studs- machine pressed (Extremely durable). Factory studs may need to be shortened..
  • Fit Vehicles With Bolt Pattern: 5x120 , Center Bore: 64.1mm & Thread Pitch: 14mm x1.5 - Your Factory wheel studs may extend past the surface of the wheel spacers. In this case, you will need to: 1) Shorten the factory studs 2) The wheels need to have the open slots (cavities) between mounting holes. 3) Purchase a set of shorter studs and replace them with the factory studs.
Check Stock

Yinpecly M4 Knurled Thumb Nuts with Collar Iron Knurled Thumb Nuts Round Knobs 3D Printers Parts Silver Tone 30pcs

  • 【DIMENSION】- Size: 12x8mm / 0.47x0.31 inch (Dia×T).
  • Small end diameter：8mm/0.31 inch. Thread Size: M4 x 0.7mm.
  • 【MATERIAL】- These Thumb Nuts made of good quality iron,rustproof and durable to use.
  • 【ADVANTAGE】- To open and close the air box cover without tools.This facilitates tightening by hand, commonly used in electronics applications.
  • 【APPLICATION】- Common on 3d printer beds, machine tools, cabinets, tool boxes, and great for maker projects and things that need adjusted quickly. Works with bolts, studs and screws.
  • 【FEATURE】- This facilitates tightening by hand, commonly used in electronics applications.
Check Stock

Machined Milled Rocker Arm Pedestal Assembly Kit 5.9L 12V Dodge Cummins for Head Studs

  • Fits 1989-1998 Dodge Cummins 5.9L Diesel 12V models..
  • Save time and hassle by purchasing our ready machine milled rocker arm pedestals..
  • Required for head studs installation. Does not include head studs. Head Studs can be purchased separately (Search CP878 in our catalogue)..
  • Rigorous quality inspections are undertaken to ensure premium product standards..
  • Xotic Performance is dedicated to offering lifetime warranty and full money back guarantee if you aren’t satisfied..
Check Stock

Customadeonly 2 Pieces 1' 25mm Hub Centric Conversion Wheel Rim Adapters Spacers with Lip (Change Bolt Pattern) 5x115 to 5x114.3 5x115 to 5x4.5 Center Bore 70.3mm 12x1.5 Stud

  • Please be sure to confirm the fitment & compatibility prior to purchase – If you are not sure if this is applicable to your vehicle -please feel free to ask us!.
  • QTY: 2 Wheel Spacers .Designed to improve the handling & appearance of your vehicle.
  • Made with high grade T-6 Aluminum – CNC machined with precised fit.
  • Carbon steel wheel studs- machine pressed (Extremely durable). Factory studs may need to be shortened..
  • Allow 5X115 Hub to Use 5×114.3 Wheels , Center Bore: 70.3mm & Thread Pitch: 12mm x1.5 . -All lug nuts should be properly tighten with factory torque spec. Average 80-90lb Your Factory wheel studs may extend past the surface of the wheel spacers. In this case, you will need to: 1) Shorten the factory studs 2) The wheels need to have the open slots (cavities) between mounting holes. 3) Purchase a set of shorter studs and replace them with the factory studs..
Check Stock

PENSON & CO. 5/8

  • Clamp a wide range of workpieces securely to the table while machining, milling or drilling.
  • Made of high grade steel and all the blocks, bolts, nuts and hold-downs are case hardened..
  • Racks can be bolted to the wall or side of machine for easy access. Best among mini clamps press tool sets.
  • This machine clamping kit provides a variety of add-ons to fully utilize Central Machinery's two speed variable bench mill/drill machine.
  • Include a variety of flange nuts, tee nuts, step blocks, coupling nuts, studs and hold down bars to fit almost any machine clamping need.Description58Pc Deluxe Steel Clamping Kit 5/8" T-Slot 1/2"-13 Stud-Size for Bridgeport Mill.
  • Compatible with all Bridgeport and Bridgeport type machines.
  • Well-organized set with each tool having it's slot.
Check Stock

Customadeonly 2 Pieces 3/4' 19mm Hub Centric Conversion Wheel Rim Adapters Spacers (Change Bolt Pattern) 5x115 to 5x114.3 Center Bore 71.5mm 12x1.5 Stud No Lip

  • Please be sure to confirm the fitment & compatibility prior to purchase – If you are not sure if this is applicable to your vehicle -please feel free to ask us!.
  • QTY: 2 Wheel Spacers .Designed to improve the handling & appearance of your vehicle.
  • Made with high grade T-6 Aluminum – CNC machined with precised fit.
  • Carbon steel wheel studs- machine pressed (Extremely durable). Factory studs may need to be shortened. If your factory thread size is different from 12X1.5″ -You will need to purchase a set of open end lug nuts in the correct thread pitch (your factory thread pitch) to complete the installation.
  • Allow 5X115 Hub to Use 5×114.3 Wheels , Center Bore: 71.5mm & Thread Pitch: 12mm x1.5 . -All lug nuts should be properly tighten with factory torque spec. Average 80-90lb Your Factory wheel studs may extend past the surface of the wheel spacers. In this case, you will need to: 1) Shorten the factory studs 2) The wheels need to have the open slots (cavities) between mounting holes. 3) Purchase a set of shorter studs and replace them with the factory studs..
Check Stock

Calculs Unicorn Iron On Transfers for Birthday Girl 20 Pcs Small HTV Decorations Stickers for Canvas Bag, Unicorn Accessories, Baby's Clothing

  • ...w item. Cotton or cotton blend fabric works best for iron-on transfers. Other types of fabric may melt from the heat of the iron. You can also use wool, silk, velveteen, velour, denim (the softer, the better) and lycra. Heat press machine and household iron are both available..
  • ▶Make sure the surface is flat while applying the transfer. You need to have a solid wooden board on top of the ironing board to prevent the mesh dissipating the heat when you apply the transfer. Set the temperature of the iron between 150℃ and 180℃(300 to 350℉) so it can transfer onto the fabric properly, but do not use steam. Steam can greatly hinder the transfer's ability to adhere to the fabric. Disperse the iron's heat evenly..
  • ▶Check to make sure the edges of the transfer are fully attached before you move onto removing the backing paper. If the edges are not fully stuck to the fabric, continue to iron the edges of the transfer. Be sure to apply steady and even pressure as you iron so the complete image is fully attached. Wait at least 24 hours after you've applied the iron on transfer before you wash your fabric. Only wash and dry your fabric on a cool setting..
  • ▶Made of high quality and environmentally friendly materials, these transfer vinyl papers are very e....
Check Stock

Dr Seuss Thing 1 Thing 2 Edible Icing Image Photo Cake Topper Sheet Birthday Party Baby Shower - 1/4 Sheet - 78189 by Sweet Cakes,Red

  • ...w item. Cotton or cotton blend fabric works best for iron-on transfers. Other types of fabric may melt from the heat of the iron. You can also use wool, silk, velveteen, velour, denim (the softer, the better) and lycra. Heat press machine and household iron are both available..
  • ▶Make sure the surface is flat while applying the transfer. You need to have a solid wooden board on top of the ironing board to prevent the mesh dissipating the heat when you apply the transfer. Set the temperature of the iron between 150℃ and 180℃(300 to 350℉) so it can transfer onto the fabric properly, but do not use steam. Steam can greatly hinder the transfer's ability to adhere to the fabric. Disperse the iron's heat evenly..
  • ▶Check to make sure the edges of the transfer are fully attached before you move onto removing the backing paper. If the edges are not fully stuck to the fabric, continue to iron the edges of the transfer. Be sure to apply steady and even pressure as you iron so the complete image is fully attached. Wait at least 24 hours after you've applied the iron on transfer before you wash your fabric. Only wash and dry your fabric on a cool setting..
  • ▶Made of high quality and environmentally friendly materials, these transfer vinyl papers are very e....
Check Stock

Gollnwe Men's Tuxedo Shirt Wing Collar French Cuffs with Cufflinks and Bow Tie White S

  • FABRIC: 96.5% cotton 3.6% spandex, soft, smooth, silk hand feeling, breathable, comfortable against the skin, definite stretch cotton fabric..
  • DESIGN: this classic wingtip collar tuxedo shirt includes a black bow-tie and a pair of mental cufflinks, a convertible placket that can be worn buttoned or with up to 4 studs, all buttons are break-resistant, cross-stitched..
  • OCCASIONS: Suitable for many accasions, such as wedding, a concert performance, and so on. Also gift idea for dad, boyfriend or brothers..
  • UNDERSTATED STYLE: This white dress shirt is easy to wear, it goes well with any tuxedos, tuxedo vests, jackets, pants and men's formal accessories..
  • EASY CARE: Hand wash or machine wash cold.
Check Stock

Customadeonly 2 Pieces 1.25' Hub Centric Wheel Spacers Adapters Bolt Pattern 5x105 to 5x105 Thread Pitch 12x1.5 Center Bore 56.5mm Fits 2010-2017 Chevy Cruz Sonic Trax Volt

  • Please be sure to confirm the fitment & compatibitliy prior to purchase - If you are not sure if this is applicable to your vehicle -please feel free to ask us! Fits 2010-2017 Chevy Cruz, 2012-2017 Chevy Sonic, 2013-2017 Chevy Trax,2017 Chevy Volt.
  • QTY: 2 Wheel Spacers .Designed to improve the handling & appearance of your vehicle.
  • Made with high grade T-6 Aluminum - CNC machined with precised fit.
  • Carbon steel wheel studs- machine pressed (Extremely durable).
  • Fits Vehicles with Bolt Pattern in 5x105, Center Bore: 56.5mm and Thread Pitch : 12x1.5 -Your Factory wheel studs may extend past the surface of the wheel spacers. In this case, you will need to: 1) Shorten the factory studs 2) The wheels need to have the open slots (cavities) between mounting holes. 3) Purchase a set of shorter studs and replace them with the factory studs.
Check Stock

HTVRONT Iron on Patches for Clothing Repair, 20 PCS Multi-Colored Fabric Patches for Clothes Repair, 20 Shades Iron Patches for Clothes, Clothing Repair Decorating Kit 3.7" by 4.9"

  • ... clothes. The free sewing kit is included for ensuring the bond firm..
  • 【EASY TO APPLY】You could use this patches for clothes to decorate, repair and reinforce the garments. The fabric patches could directly be cut into the shape and pattern you want. CAUTION: pay more attention on the edges avoiding curling when applying the iron patches for clothes. Please feel free to contact us if you are not satisfied with patches iron on..
Check Stock

2 Pieces 1" 25mm Custom Lug Centric Wheel Spacers Adapters Bolt Pattern 4x100 to 4x100 Thread Pitch 12x1.5 Center Bore 67.1mm Compatible for Miata Mx-3 Drift JDM NA NB

  • Please be sure to confirm the fitment & compatibility prior to purchase - If you are not sure if this is applicable to your vehicle -please feel free to ask us!.
  • QTY: 2 Wheel Spacers .Designed to improve the handling & appearance of your vehicle.
  • Made with high grade T-6 Aluminum - CNC machined with precised fit.
  • Carbon steel wheel studs- machine pressed (Extremely durable).
  • Compatible for vehicles that are in 4x100 bolt pattern & 12x1.5 thread pitch and with center bore that is smaller than 67.1mm. Your Factory wheel studs may extend past the surface of the wheel spacers. In this case, you will need to: 1) Shorten the factory studs 2) The wheels need to have the open slots (cavities) between mounting holes. 3) Purchase a set of shorter studs and replace them with the factory studs..
Check Stock