Top Ironworker Square Ruler

45 Degree Aluminum Alloy Angle Ruler, 2in/6cm Right Angle Triangle Height Ruler Woodworking Square Multifunction Measuring Tool

  • High Quality Material: This woodworking square triangle ruler is made of high-quality aluminum alloy material, which is oxidized, not easy to corrode and rust, strong and wear-resistant, not easy to deform, and has a long service life..
  • Dual Scale Design: This angle measuring ruler is designed with both centimeters and inches, and the front and side laser-engraved scales are clear and precise, making it easy to read the value or mark when using..
  • Easy To Use: The woodworking angle ruler is designed with a large center hole, suitable for your fingers to hold or fix on the workpiece, easy and comfortable to place, handle or move without damaging the fragile cutting edge..
  • Applications: This 45 degree aluminum alloy square is designed to clip boxes, picture frames, etc. to assist in square crafting.
  • a must-have tool for woodworking hobbyists, home builders, carpenters, engineers, and hobbyists..
  • Professional Manufacturing: This square measuring ruler is manufactured by professional technology, with high precision, good effect and stable performance. It is suitable for most working env....
Check Stock

Creative Grids Quilt Ruler 6-1/2in x 12-1/2in - CGR612

  • ...4 inch dashed lines printed on two adjoining sides aid in trimming seam allowances. Use the patented Turn-A-Round feature – designated by the easy to read, numerical white numbers (printed on black dots) and the 1/2 inch grip sides – to add the 1/2 inch seam allowance..
  • Use the white 45 degree angle to trim half-square triangles in whole inch increments. Use the black 45 degree angle to trim half-square triangles in half inch increments. An additional black 45 degree line is placed so that two angles cross 1/4 inch away from the outside edge..
  • Use these markings to square up flying geese units.
  • squares set on point or mark cross-hatching. The ruler also features a 30degree/60degree angle. White horizontal and vertical lines are printed on the rectangle so the center of the ruler is easily distinguishable. Use these lines to fussy cut stripes and borders..
  • The ruler slides easily over the fabric until pressure is applied. Then, our exclusive gripper holds the fabric in place while cutting, eliminating slipping and miss-cuts! Scan the QR Code printed on the ruler to view a tutorial of these features..
Check Stock

Combination Square 12 Inch, Stainless Steel Inch/Metric Measuring Ruler, Adjustable Sliding Protractor Level Measure Measuring Set 4-Piece 4R Combination Square, Measuring Tool for Wood Working

  • 【IDEAL MEASURING TOOL】The combination square is made of high-quality stainless steel, which can be used conveniently when you need to measure. Rugged, multi-angle measurement, very suitable for measuring the internal and external angles of objects. The gear frame is made of high-quality zinc alloy and has a long service life..
  • 【HIGH PRECISION MEASUREMENT】This combination square ruler has a measurement range of 0-180 degrees and an accuracy of 5’/0.08 degrees. This combination square ruler is a must-have tool in your toolbox. Allows you to quickly and accurately mark and measure in various applications..
  • 【EASY TO USE】This carpenter square adopts a nut fixing body, which can be removed and used. Allows you to quickly and easily draw lines for cross-cutting, beveling, splitting, arranging any angles, and finding the centerline of a circle, pin, or rod. This is essential in any woodworking or metalworking project..
  • 【SCOPE OF APPLICATION】This combination square can measure the depth of shallow cutting and joinery, calibrate and set the table saw, and measure the height of the router’s drill bit. It is suitable for engineering surveying, wood processing, home maintenance, and decoration. Both beginners and experienced can easily use it..
Check Stock

Creative Grids Quilt Ruler 3-1/2in x 6-1/2in - CGR36

  • ...4 inch dashed lines printed on two adjoining sides aid in trimming seam allowances. Use the patented Turn-A-Round feature – designated by the easy to read, numerical white numbers (printed on black dots) and the 1/2 inch grip sides – to add the 1/2 inch seam allowance..
  • Use the white 45 degree angle to trim half-square triangles in whole inch increments. Use the black 45 degree angle to trim half-square triangles in half inch increments. These 45 degree lines cross 1/4 inch away from the outside edge. Use these markings to square up flying geese units.
  • squares set on point or mark cross-hatching..
  • The ruler also features a 30 degree/60 degree angle. White horizontal and vertical lines are printed on the rectangle so the center of the ruler is easily distinguishable. Use these lines to fussy cut stripes and borders..
  • The ruler slides easily over the fabric until pressure is applied. Then, our exclusive gripper holds the fabric in place while cutting, eliminating slipping and miss-cuts!.
Check Stock

IRWIN Tools Tri and Mitre Square (1794473),Silver

  • 【High quality】: Mecurate rafter square made of precise and durable CNC-machined aluminum alloy, which is light and convenient. Good oxidation resistance, not easy to break, each triangle ruler is thickened, corrosion-resistant and high hardness..
  • 【Permanent scale】: With permanent laser engraved scales, Mecurate rafter square gives you the over standard accuracy you need. The angle conversion table offers convenience of using the right number to work with. Frosted smooth surface, wear resistance, clear scale on the ruler surface, long service life..
  • 【Multi-function】: Suitable for the measurement, Mecurate rafter square can be used as a protractor, woodworking compass, triangle square and frame square. The horizontal base is convenient for marking, smooth and practical..
  • 【Convenient and comfortable design】: Mecurate rafter square is convenient to hang and store when not in use with humanized design. The edges and corners of each triangle are polished by special craftsmanship, so that it is smooth and does not hurt your hands..
  • 【Warranty】: Mecurate products are providing 12 months warranty and life time support, be free to have new item for replacement..
Check Stock

Aluminum Alloy Woodworking Square Size Measure Ruler, welltop 3D Mitre Angle Measuring Tool, Multifunctional 45/90 Degree Angle T Ruler Gauge, for Three Dimensional Items Measuring Timber, Pipes

  • 【Multifunctional 3D Mitre Angle Ruler】The angle ruler has more than 10 functions, 10-in-1, which are: square, protractor, dovetail template, circular hole, parallel line, vertical line, drilling positioning, T-shaped dovetail joint, 45° angle, 90° angle, ten common angles to meet your different needs..
  • 【Tough & Durable Material】The 3D mitre angle measuring tool is made of high quality aluminum alloy material, high hardness, high toughness, non-toxic, rust-proof, durable and non-deformable, high-precision measurement and long life span. Compared with other plastic rulers, which is more durable and has higher accuracy..
  • 【High Measurement Accuracy】Superb carftsmanship, square marking gauge, fine polishing surface, comfortable in your hand, and easy to use. 3D design, no need to flip the body when measuring, just slide to mark the left and right 45 degree or 90 degree angles. The measurement accuracy is 1mm. It can help you to improve working efficiency and save time with woodworking projects..
  • 【Clear Scale】The multi-functional angle ruler with clear engraving metric scales, is easy to read and elegant in ....
Check Stock

Mecurate Rafter Square, 12 inch Triangle Carpenter Square Die-cast Aluminum for Woodworking and Carpentry

  • 【High quality】: Mecurate rafter square made of die-casting aluminum, which is light and convenient. Good oxidation resistance, not easy to break, each triangle ruler is thickened, corrosion-resistant and high hardness..
  • 【Permanent scale】: With permanent laser engraved scales, Mecurate rafter square gives you the over standard accuracy you need. Frosted smooth surface, wear resistance, clear scale on the ruler surface, long service life..
  • 【Multi-function】: Suitable for the measurement, Mecurate rafter square can be used as a protractor, woodworking compass, triangle square and frame square. The horizontal base is convenient for marking, smooth and practical..
  • 【Convenient and comfortable design】: Mecurate rafter square is convenient to hang and store when not in use with humanized design. The edges and corners of each triangle are polished by special craftsmanship, so that it is smooth and does not hurt your hands..
  • 【Warranty】: Mecurate products are providing 12 months warranty and life time support, be free to have new item for replacement..
Check Stock

Mecurate Rafter Square, Triangle Carpenter Square Die-cast Aluminum Alloy for Woodworking and Carpentry (7 inch die-Casting)

  • 【High quality】: Mecurate rafter square made of die-casting aluminum, which is light and convenient. Good oxidation resistance, not easy to break, each triangle ruler is thickened, corrosion-resistant and high hardness..
  • 【Permanent scale】: With permanent laser engraved scales, Mecurate rafter square gives you the over standard accuracy you need. Frosted smooth surface, wear resistance, clear scale on the ruler surface, long service life..
  • 【Multi-function】: Suitable for the measurement, Mecurate rafter square can be used as a protractor, woodworking compass, triangle square and frame square. The horizontal base is convenient for marking, smooth and practical..
  • 【Convenient and comfortable design】: Mecurate rafter square is convenient to hang and store when not in use with humanized design. The edges and corners of each triangle are polished by special craftsmanship, so that it is smooth and does not hurt your hands..
  • 【Warranty】: Mecurate products are providing 12 months warranty and life time support, be free to have new item for replacement..
Check Stock

Stair Gauges for Framing Square and Rafter，Lengthen，Anti-lost Pair

  • Lengthened size—Perfect for stair stringers layout, rafter layout, etc.Easy layout on any material,especially when there are gaps in the edge of the....
  • Patented product.Recessed cutout—Align them with the specific ruler marks on the frame square, the ruler marks can be seen through the concave cut....
  • Dedicated storage—The gauge is equipped with steel wire rope to provide a dedicated storage place to prevent loss.They are also very light and easy....
  • Material—Made of anodized aluminum alloy.Hexagonal plane is more frictional and can work better..
  • Multiple functions—Stair stringers and Rafter layout - Rip guide for circular saw - Framing square attachment - Using on speed square to mark....
Check Stock

Westcott 7-Inch Goniometer Quick Angle Protractor Measuring Tool (GO-180)

  • 【Dimension】- Vernier Bevel Protractor.
  • Measure angle: 320 Degrees；Material: Tool Steel.
  • 【High Quality】- This product is made of high-quality tool steel, practical and durable. It is not easy to rust, easy to carry and easy to store..
  • 【Easy Operation】- Universal angle ruler consists of ruler body, 90° square ruler, cursor, brake, base ruler, straight ruler, card block etc.Easy to operate and versatile, very practical..
  • 【Design】- 0-320 Measurement Angle.This universal bevel protractor is used to measure precise angle or angle measurements inside and outside the scriber. Measuring range is 0-320 degrees, easy to use..
  • 【Practicality】- Perfect for construction jobs, cabinet-making and fine carpentry, where a standard protractor or t-bevel won't fit.It is suitable for measuring tools of precise workpiece angle..
Check Stock

TableRe Measure Optical Vernier PD Ruler Pupil Distance Meter Eye Ophthalmic Tool (1 Pack)

  • My PD Ruler is a mm ruler for accurate PD measurements. Just Wear, Slide & Record your PD. Each pack has 2 PD Rulers: for an adult and a child..
  • PD measurement tool adults kids plastic square flexible level distance glasses folding eye care leveler radius gauge millimeter scanner measuring tester centimeter eyeglasses pupillary visual tools pupil optical tracker pd ruler meter vernier home use.
Check Stock

Lkonwee Tall Stair Gauges for Stair Layout, Rafter Layout, Marking Repetitive Angles, Framing Square Attachment and As A Rip Guide on Your Saw Jigs

  • Material: Made of anodized aluminum with a black oxide stainless steel thumbscrew,tough and durable..
  • Functions: Stair stringers and Rafter layout - Rip guide for circular saw - Framing square attachment - Using on speed square to mark repetitive angles - Using on speed square to guide saw to make angle cuts..
  • The Taller Profile extends down past any rounded edges for defects on your work piece, giving you a seriously accurate layout..
  • The large knurled thumbscrew makes it easy to grip and tighten onto any rafter square even when wearing gloves..
  • Align them with the specific ruler marks on the frame square, the ruler marks can be seen through the concave cut when the gague is fully inserted,increase visual field area..
Check Stock