Top Isolated Switch

Voodoo Lab Pedal Power X4 Isolated Output Expander Kit

  • Adds four 9V isolated outputs to an existing pedal power.
  • Powered from any Voodoo Lab pedal power 12V 400mA output.
  • Ultra-compact chassis easily mounts to the smallest pedalboards.
  • Unique DC transformer topology provides optimum platform for QUIET switch-mode power.
Check Stock

Blue Sea Systems 2136 CIRCUIT BREAKER PUSH BUT ST 30A

  • Yellow Manual Reset button 80 Amp Miniature Circuit Breakers,4 Gauge Plated Inputs.
  • Compact and lightweight design,Protects your trolling motor from electrical damage, prevents excessive current and stops power surges from damaging Amps.
  • Visible Red manual reset lever shows open condition, unique push button reset Can also be used as a kill switch. Button on circuit breaker can act as a master disconnect for circuits.
  • Housing is thermalplastic UL rated 94V0，Surface mount cover protective the stud to be isolated, splash, waterproof IP 67.
  • Typically used in auxiliary and accessory circuits for Boat, Marine, RV, Caravan, Winch, Tractor and ATV applications. Also can used as an on/off button switch for the battery or DC sound system.
Check Stock

DDCSV3.1 3 Axis Offline CNC Motion Controller Handwheel G Code PLC Control System Electronic Handwheel with Emergency Stop Function

  • Upgrade algorithm,support soft interpolation,fixed arc interpolation bug of the old version. ARM9 main control chip,FPGA core algorithm chip. 16 opto isolated digital inputs,3 opto isolated digital outputs..
  • 3 axle motor Control.Differential Pulse and direction output signal,maximum.500Khz per axle. Analog spindle control 0-10V spindle control (can be modified as PWM output). Jog function for each axle (continuous, step, defined distance). 24VDC power input, minimum Current is 0.5A..
  • 5 inches TFT screen, resolution ratio: 480x272,17 operation keys. USB flash disk support for G code file input,no size limited of the G-code file. 1GB internal memory and support standard MPG..
  • Support the operation of quickly specify the running position and ''Power Cut'' recovery. Data is automatically saved. Support the origin and Limit share the same Input ports.The controller only support NPN type limited switch..
  • Drive output type, strong anti-interference ability, long-distance transmission. Applications: CNC machine tools, printing machinery and other zero correction and signal segmentation..
Check Stock

Aumox 5 Port Gigabit PoE Switch, 4 Port PoE 78W, Gigabit Ethernet Unmanaged Network Switch, Sturdy Metal Housing, Plug and Play, Traffic Optimization (SG305P)

  • 【4-Port 78W PoE】Designed with IEEE802.3af/at standard, Aumox PoE ethernet switch can transmit network data and power at the same time. This gigabit switch offers a maximum 78W PoE power output in total. Single-port POE power up to 30W, meets power supply requirements of various applications..
  • 【Gigabit Ethernet】Aumox network switch features 100/1000 Mbps ports, enables ultra-fast wired connectivity and instant large files transferring. Unmanaged gigabit switch, easy to setup, plug and play..
  • 【Reliable Fanless Metal Housing】Metal housing design makes the PoE switch reliable to use in different use cases. Fanless design give you a quiet and noise free environment..
  • 【One-Key VLAN】Supports one-key VLAN mode, and ports are isolated from each other. Effectively suppress network faults such as network storms, ensuring good network transmission performance and security..
  • 【Intelligent Recognition】Intelligently identify whether the IP terminal supports power supply,protect powered device..
Check Stock

DDCSV3.1 Standalone Motion Controller off-line 100 Pulse MPG Handwheel Emergency Stop for CNC Router Engraving Machine (3-Axis with MPG)

  • 16 opto isolated digital inputs,3 opto isolated digital outputs.Analog spindle control 0-10V spindle control (can be modified as PWM output).Drive output type, strong anti-interference ability, long-distance transmission..
  • Upgrade algorithm,support soft interpolation,fixed arc interpolation bug of the old version.5 inches TFT screen, resolution ratio: 480x272,17 operation keys..
  • 4 axle motor Control.Differential Pulse and direction output signal,maximum.500Khz per axle.24VDC power input, minimum current is 0.5A. Support the origin and Limit share the same Input ports.The controller only support NPN type limited switch..
  • ARM9 main control chip,FPGA core algorithm chip.1GB internal memory and support standard MPG.Jog function for each axle (continuous, step, defined distance)..
  • USB flash disk support for G code file input,no size limited of the G-code file.Support the operation of quickly specify the running position and ''Power Cut'' recovery. Data is automatically saved.Applications: CNC machine tools, printing machinery and other 0 correction and signal segmentation..
Check Stock

4 Axis 500Khz Offline Stand Alone CNC Motion Controller System PLC G code Servo/Stepper Motor Control Replace Mach3+100PPR MPG Handwheel with emergency stop for CNC Router Engraving Machine DDCSV3.1

  • 5 inches TFT screen, resolution ratio: 480x272,17 operation keys.
  • ♞【Feature】16 photoelectric isolated digital inputs,3 photoelectric isolated digital outputs.
  • the highest output pulse per axis is 500KHz. This....
  • ♞【SB flash disk】4G USB flash disk support for G code file input,no size limited of the G-code file.
  • ARM9 main control chip,FPGA core algorithm....
  • ♞【Power requirements】The Power Supply for the controller is 24VDC,DDCSV3.1 needs two power supplies,main power is for system,IO port is for....
  • ♞【MPG with 15-pin connector】MPG Resolution:100PPR.
  • DDSCV3.1 Version enhenced Algorithm,support soft interpolation,fixed arc....
Check Stock

Friedman Amplification BE-OD Deluxe Dual Overdrive Guitar Effects Pedal

  • Authentic British Overdrive Tones based on the Legendary "BE-100" tube head.
  • Dual Channels with Volume, Gain, Bass, Middle, Treble and Presence.
  • Three Position Tight Switch (per channel).
  • Includes Splitter Cable for 18V Operation (connect to power supply via 2 x 9V isolated outputs).
Check Stock

SODOLA 4 Port PoE+ Switch | 4 PoE+ Ports &2 Fast Ethernet uplink,65W 802.3af/at, Extend Function, Fanless Metal,Plug & Play Unmanaged Network Switch

  • 【6 Port PoE+ Switch】4*10/100Mbps PoE+ Ports(802.3at/af)&2*10/100Mbps uplink, power budget up to 30W per PoE port and 65W for the whole..
  • 【Plug and Play】Sodola 6 Port Unmanaged Network Switch Support automatically detect devices,easy to setup with no software installation or configuration required..
  • 【Extend Mode】When Extend Mode is enabled, the transmission distance of POE ports can be extended to 250m at transaction rate of 10M..
  • 【PoE Switch Safety Concern】Passed CE/FCC/RoHS certification, SL-S06P reaches 4KV/8KV Lightning Protection level to guarantee safety. One-Key VLAN function makes Port 1-4 be isolated to reduce the network congestion effectively. AI Watchdog intelligent detection automatically reboot the disconnected and unresponsive PoE-powered devices..
  • 【Multiple Compatibility】Sodola 6 Port PoE Switch can be widely used scenarios such as IP cameras, Wireless Access Point, Computer Networks devices, etc. We committed to provide product- replace- without- repair service within 1 year, more concern on your using experience..
Check Stock

UCTRONICS PoE hat for Raspberry pi

  • For Pi 4 and 3 B+: This PoE HAT can be used to deliver clean and reliable power to the raspberry pi 3 model B+ and raspberry pi 4 model B (not included)..
  • Intelligent Temperature Control: the 25mm×25mm brushless cooling fan will turn automatically when the temperature of the processor is high..
  • Smaller Size: Save more space than the official HAT, can be held in the most case for Raspberry Pi.We recently released a new version of PoE HAT with fan, which can support 48V non-standard switches, please search B09MCGFX12.
  • NOTE: The network switch or power sourcing equipment (PSE) is needed to supply the PoE signal, and they must be compliant with the IEEE 802.3af or 802.3at PoE standard, particularly section 33.4.1 with regards to PSE electrical isolation of the leads. For the non-isolated switch, such as some Ubiquiti switches can not provide proper isolation, they can only work with CAT 5E and CAT 6E network cable..
Check Stock

AC 220V to 11V/7V 140mA/180mA 7-pin Microwave Oven Power Transformer 11 V

  • On/Off Power Switch(Lighted),20A fuse & power cord..
  • Enclosed, non-isolated, adjustable transformer, with Output Volt Meter..
  • Built-in copper coil, material quality, more secure and durable..
  • Contact voltage regulator, wide voltage range (0-130V)..
  • Suit for Motor Speed control,Label Printing Machine,EE Labs,Test for Railroad Switching, Power Supplies, Satellite,Equipment,Telecommunication....
Check Stock

Aumox 5-Port Gigabit PoE Switch with 4 x PoE 78W, Upgraded Fast Network Switch, Durable Metal Casing, IEEE802.3At/Af, Traffic Optimization, Plug and Play Unmanaged Ethernet Switch.

  • 【Fast 4-Port 78W Gigabit PoE Switch】Supporting 802.3at/af network standards, 10/100/1000 Mbps RJ45 ports, including 4x PoE Ports with 1 x Uplink Port. Providing up to 30W per port and total PoE power budget of 78W..
  • 【Fanless Sturdy Metal Case】Fanless design will effectively reduce noise and keep quiet. With durable metal casing, Aumox ethernet PoE switch features excellent durability and heat dissipation..
  • 【Easy Plug and Play Installation】Simple plug and play setup with no APP to install or configuration needed, automatically detect devices, just plug in the power cord and network cable..
  • 【Compact Size for Easy Use】Aumox PoE ethernet switch has small size with 7.9×4.6×1.7 inches, easily positioned on your desktop or a wall, saving more space..
  • 【One-Key VLAN】Support One-Key VLAN, Port 1-4 will be isolated respectively but can communicate with the 5 port. Hardware DIP switch to isolate ports to prevent broadcast storm and defend against DHCP spoofing..
Check Stock

Alesis SamplePad Pro - Percussion and Sample-Triggering Instrument With 8 Velocity Sensitive Drum Pads, 200+ Built-in Sounds

  • Everything you need for Expressive Performances - 8 isolated rubber pads with Active blue LED pad illumination keeps your performance on point so you never miss a beat.
  • Expanded Control - 2 additional drum pad inputs plus a Kick Pedal input (selectable switch or trigger mode) and a Hi-Hat pedal input (selectable switch or variable mode).
  • In-Demand Sound - 200+ built-in drum, cymbal, and percussion sounds organised into 10 ready-to-play drum kits.
  • Connectivity Covered - MIDI In / Out ports, USB port for computer connectivity, 1/4" stereo outputs (L, R), 1/4" headphone output with volume control and 1/8" stereo aux input with level control.
  • Load Your Own Samples - Add new sounds via SD Card (SD Card not included).
  • Save up to 512 sounds and 20 kits per 32GB SD card.
Check Stock