Top Jack Stand Pinch Weld Adapters

HXXF 2 Types Jack Stand Pads Adapter 4 Ton Universal Rubber Slotted Frame Rail Pinch welds Protector for Jack Stand Black

  • Round Type Jack Pads: 75mm Diameter 35mm Height, Slot Dimensions: 10mm Wide 15mm deep. V-Type Jack Pads: Length-63mm, Hight-50mm, Width-44mm, Groove....
  • 【BEST PROTECTION】This jack pad adapter is a great protector to prevent your frame rail, specifically pinch welds from bending or scratching while....
  • 【SAFE & HEAVY DUTY】 Made of durable rubber material, Maximum Load Bearing is 3 Tons.Jack stand rubber pad adapter is designed to be sturdy enough....
  • 【UNIVERSAL】We have specified jack pads' dimension on the picture, Please check your jack's size/dimension before your purchase. The jack pad....
  • 【PROMISE】We stand by and believe in our products, HXXF provide you friendly customer service.If you are not 100% satisfied,please feel free to....
Check Stock

Yunpo tech Jack Pads Universal Trolley Floor Rubber Jack Disk Pad Adapter Rubber for Pinch Weld Side(2-Pack)

  • ★Jack Pad Application: This Universal Jack Pad Adapter used to protect the undercarriage metal jack point railing that is on most vehicles, fits various Domestic USA, Japanese, and European Vehicles.
  • ★Protect Your Car: Durable and resistant to damage, it will keep the chassis rails from getting pinched, bent, and broken.Prevent your frame rail pinch welds from bending when using a jack to lift your car.
  • ★Load Bearing Design: Designed to be sturdy enough to support your lift point while soft enough to preventing crushing the contact area.
  • ★Extra Grip: When lifting the car,the rubber pad adds extra grip, reduces slippage and stabilizes.Suitable for car maintenance repairment.
  • ★Stand Jack Pad: Great for DIY vehicle maintenance or taking one with you in the car as some tire shops do not use these pads,and unfortunately bend your pinch/scrape off paint on the welds. This can eventually lead to rust, save yourself the hassle with this simple product.Fits most vehicles and floor jacks, please ensure fitment by checking listed dimensions.
Check Stock

Complete Compact Spare Tire Kit w/Wheel Spacer - Fits 2015-2020 Dodge Charger Hellcat & SRT392 - Modern Spare

  • Conveniently Fits Inside Trunk Tire Well With All Necessary Mounting Hardware Included. (*This kit only)..
  • 18×4 Aluminum Alloy Wheel With 5x115MM Bolt Pattern. T135/80/R18 Tire With A DOT M Speed Rating (104M) With A 26.5” Rolling Diameter..
  • Enlarged Wheel Brake Caliper Clearance For Use With Larger 4-Piston Front Brembo Brake Calipers* (See details below on models equipped with 6-Piston....
  • 3000 LB TruLift Ratcheting Scissor Jack With Secure Pinch weld Contact Point. Modern Spare 14” – 21” Telescoping Lug Wrench With 17MM, 19MM,....
  • Large Disposable Tire Bag Included For Full Size Tire Transport..
Check Stock

Jungle Jim s Commercial or Push Mower Lift Jack - Even ZTRs - 800 pound Capacity!

  • One lifting tooth designs enables easier access to several lifting points on the mowers..
  • Standard 2” tooth fits 90% of mowers, however certain mowers have longer/wider baffles that require the optional 3” tooth upgrade (purchased....
  • It will lift any ZTR or stand-on-mower up to the lifting capacity of 800lbs..
Check Stock

Toolly 4 Packs Floor Jack Pad Adapter for Jack Stands 2-4 Ton Universal Heavy Duty Rubber Jack Disk Pads Slotted Frame Rail Pinch Welds Protector for Lifting Car

  • ...each style.Different size and shape could meet your various needs..
  • Made of High-quality heavy duty rubber, super Construction and Durable, Soft enough to resist pressure for your floor jack While sturdy enough to support you jack point. Perfectly suitable for 2-4 ton jack stand. Please verify dimensions and ensure fitment to your jack and vehicle..
  • Round Type Jack Pads: 71mm Diameter 43mm Height, Slot Dimensions: 13mm Wide 13mm deep. V-Type Jack Pads: Length-60mm, Hight-50mm, Width-44mm, Groove depth-15mm..
  • Toolly jack pad adapter is a great protector to prevent your frame rail, specifically pinch welds from bending or scratching while using with a car jack stand..
  • Our set includes 4Pcs jack pads, Incuding 2Pcs Round Type Jack Pads and 2Pcs V-Type Jack Pads providing the value you need to get the job done right - without sacrificing quality. What's more, they're backed by our 100% manufacturer's warranty - if you aren't happy for any reason, return it for a full refund..
Check Stock

CURT 28356 Weld-On Pipe-Mount Swivel Trailer Jack, 5,000 lbs. 15 Inches Vertical Travel

  • DEPENDABLE STRENGTH. This trailer jack is rated to support up to 5,000 pounds trailer tongue weight.
  • SWIVEL DESIGN. To ensure plenty of clearance while towing your trailer, this trailer jack stand is equipped with a swivel bracket. The jack swings up and out of the way for towing and features a pull pin to securely lock into place.
  • EASY OPERATION. This trailer tongue jack allows for 15 inches of vertical movement and operates using a top-wind handle (16-1/2-inch retracted height, 31-1/2-inch extended height). The integrated grip allows for easy raising and lowering.
  • CORROSION-RESISTANT. For long-lasting corrosion resistance against water, dirt, road salt and more, this trailer jack is protected in a durable black powder coat and zinc-plated finish.
  • SECURE INSTALL. This trailer tongue jack is designed to mount onto the trailer frame with a weld-on installation. It comes with a raw steel pipe bracket for ready welding.
Check Stock

CURT 28300 Weld-On Bracket-Style Swivel Trailer Jack, 2,000 lbs. 10-1/2 Inches Vertical Travel

  • DEPENDABLE STRENGTH. This trailer jack is rated to support up to 2,000 pounds trailer tongue weight.
  • SWIVEL DESIGN. To ensure plenty of clearance while towing your trailer, this trailer jack stand is equipped with a swivel bracket. The jack swings up and out of the way for towing and features a pull pin to securely lock into place.
  • EASY OPERATION. This trailer tongue jack allows for 10-1/2 inches of vertical movement and operates using a top-wind handle (11-1/2-inch retracted height, 21-1/2-inch extended height). The integrated grip allows for easy raising and lowering.
  • CORROSION-RESISTANT. For long-lasting corrosion resistance against water, dirt, road salt and more, this trailer jack is protected in a durable black powder coat and zinc-plated finish.
  • SECURE INSTALL. This trailer tongue jack is designed to mount onto the trailer frame with a weld-on installation. It comes with a raw steel bracket for ready welding.
Check Stock

CURT 28354 Weld-On Pipe-Mount Swivel Trailer Jack, 5,000 lbs. 10 Inches Vertical Travel , Black

  • DEPENDABLE STRENGTH. This trailer jack is rated to support up to 5,000 pounds trailer tongue weight.
  • SWIVEL DESIGN. To ensure plenty of clearance while towing your trailer, this trailer jack stand is equipped with a swivel bracket. The jack swings up and out of the way for towing and features a pull pin to securely lock into place.
  • EASY OPERATION. This trailer tongue jack allows for 10 inches of vertical movement and operates using a side-wind handle (10-1/4-inch retracted height, 20-1/4-inch extended height). The integrated grip allows for easy raising and lowering.
  • CORROSION-RESISTANT. For long-lasting corrosion resistance against water, dirt, road salt and more, this trailer jack is protected in a durable black powder coat and zinc-plated finish.
  • SECURE INSTALL. This trailer tongue jack is designed to mount onto the trailer frame with a weld-on installation. It comes with a raw steel pipe bracket for ready welding.
Check Stock

CURT 28358 Weld-On Pipe-Mount Swivel Trailer Jack, 5,000 lbs. 15-1/2 Inches Vertical Travel

  • DEPENDABLE STRENGTH. This trailer jack is rated to support up to 5,000 pounds trailer tongue weight.
  • SWIVEL DESIGN. To ensure plenty of clearance while towing your trailer, this trailer jack stand is equipped with a swivel bracket. The jack swings up and out of the way for towing and features a pull pin to securely lock into place.
  • EASY OPERATION. This trailer tongue jack allows for 15-1/2 inches of vertical movement and operates using a side-wind handle (15-5/8-inch retracted height, 31-1/4-inch extended height). The integrated grip allows for easy raising and lowering.
  • CORROSION-RESISTANT. For long-lasting corrosion resistance against water, dirt, road salt and more, this trailer jack is protected in a durable black powder coat and zinc-plated finish.
  • SECURE INSTALL. This trailer tongue jack is designed to mount onto the trailer frame with a weld-on installation. It comes with a raw steel pipe bracket for ready welding.
Check Stock

VEVOR Post Puller 42\ Long Chain Fence Post Puller 32\ Standing Frame Wood Post Puller Set with Lifting Chain Puller Stump Puller Fence Post Remover for Round Fence Post, Metal, Sign Post & Tree Stump

  • 【Specification】Capacity: 6600LBS/3Tons；Min.Height: 135mm/5.31"；Max Height: 420mm/16.54"；Shipping weight: 44LB.
  • 【Application】When single side needs to be lifted.Go above water in sand or muddy road.Escape when single wheel sinks into ditches.Cross ditches.Preferred jacking tool on frame racks, alignment machines and in all types of repair shops.Can be used on frame or alignment machine, or on the floor. With its best quality, you can expect years of trouble-free use..
  • 【Easy Storage&Fast Use】Handy and easy storage, Rapid, labor saving, Lager stressed area, fits on soft and easy-collapsing terrain.Triple bag jack is the easiest and fastest way to install pinch weld clamps on the frame machine..
  • 【Warm Tips】This 3 Ton Pneumatic Air Jack with the design of compact and lightweight provides quick up and down positioning. Before lifting your vehicle, please check carefully whether there are sharp objects nearby, as they may hurt the air jack and vehicle..
  • 【Easy Use】Inflated with compressed air, they are easy to handle, and they are easier to handle without load than spring types..
Check Stock

A ABIGAIL 4 Pack Jack Rubber Pad Adapter for Jack Stand Universal Rubber Slotted Frame Rail Pinch welds Protector 2 Types Sparta Floor Jack Pad Adapter

  • 【Best Protection for Your Car Undercarriage】Jack Stand Pad is specifically designed to protect the car when you use a car jack. It will prevent your frame rails and pinch welds from bending when using a Jack to lift your car, can also protect painted or coated suspensions components..
  • 【Application】The jack pad adapter fits most jacks and vehicles and can work great with jack stand, specifically compatible with Torin Big Red T43002. But NOT fit for Torin T42002..
  • 【Perfect Design】The rubber pad adds extra grip when raising the car and reduce slipping, it is stable and suitable for any type of body and Jack like Unitec, Michelin etc. Also keeps the chassis rails from getting bruised, bent or broken..
  • 【High Quality】Made from highly durable rubber and cross slotted design which will provide more cushion and crush resistance., Maximum Load Bearing 2-4 Ton..
  • 【Service】100% satisfaction guarantee. If you have any issues with the product, just contact us for troubleshooting help, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide..
Check Stock

Desktop Anti-Theft Stand – CTA Kiosk Stand with Stylus, Tether, and Aluminum Enclosure for iPad (Gen 2-6), iPad Air (Gen 1 & 2), & iPad Pro 9.7 (PAD-DASB) – Black

  • Includes: 1 kiosk stand, 1 stylus, 1 tether, 1 set EVA adapters, 2 keys, 1 set mounting hardware.
  • CTA Digital’s Desktop Anti-Theft Stand for iPad creates a secure, efficient digital workspace in classrooms, conference rooms, or even retail.
  • Locking aluminum enclosure protects tablet from theft.
  • Strategic design allows access to your tablet’s home button, charger, headphone jack, volume buttons, and cameras.
  • Case rotates 360 degrees for easy portrait and landscape orientations.
  • Includes touchscreen stylus and elastic tether, plus built in holder on stand base.
  • This stand mounts easily to your countertop, desk, or table with a set of included hardware.
  • Perfect for reception desks, waiting rooms, and more.
  • Compatible with iPad (gen. 2-4), iPad (Gen. 5-6), iPad Air (Gen. 1 and 2), iPad Pro 9.7.
  • compatible with headphone jack credit card readers.
Check Stock