Top Jacket Sampling Vent Valve

Advantec 353130 Vacuum Filtration Manifold Stainless Steel 3-Branch with 3-Way Valves

  • Three-way valve enables you to vent the branch to atmosphere without breaking the vacuum connection|three-way valve vent is a female luer slip connection to accept a standard syringe filter.
  • Two- and three-way valves feature ptfe stopcocks for smooth control|valves provide independent control at each branch for vacuum and venting|connect three or six filter holders to one vacuum source.
Check Stock

Birthday Suit [Explicit]

  • J.M. HAGGAR: From the comfort you know and love. The J.M. Haggar suit collection checks all boxes. This classic fit jacket features 2 button, notched lapel, center vent, 4 sleeve button, flap pockets, and piped interior..
  • MATERIAL: The Houndstooth design is made of 69% Polyester, 29% Viscose Rayon, and 2% Spandex for stretch and recovery. The comfort of the stretch is what makes this suit jacket your go-to selection for the office or a formal event..
  • STYLE: The Houndstooth design in the jacket is what sets this apart from other suit separates. The stretch is what will keep you going back to it!.
  • COMFORT: Without a doubt, this suit coat will not hinder your comfort throughout the day. From the stretch built right into the fibers and center vent flexibility, you are sure to not only look good but feel great!.
  • CARE: This suit coat is recommended to be dry cleaned in order to preserve the quality and design..
Check Stock

Man Photo Suit

  • J.M. HAGGAR: From the comfort you know and love. The J.M. Haggar suit collection checks all boxes. This classic fit jacket features 2 button, notched lapel, center vent, 4 sleeve button, flap pockets, and piped interior..
  • MATERIAL: The Houndstooth design is made of 69% Polyester, 29% Viscose Rayon, and 2% Spandex for stretch and recovery. The comfort of the stretch is what makes this suit jacket your go-to selection for the office or a formal event..
  • STYLE: The Houndstooth design in the jacket is what sets this apart from other suit separates. The stretch is what will keep you going back to it!.
  • COMFORT: Without a doubt, this suit coat will not hinder your comfort throughout the day. From the stretch built right into the fibers and center vent flexibility, you are sure to not only look good but feel great!.
  • CARE: This suit coat is recommended to be dry cleaned in order to preserve the quality and design..
Check Stock

Zeagoo Lightweight Windbreaker Women Hoodie Rain Jacket Women Coat, White, Medium

  • FUNCTIONALITY: Adjustable draw cords at hood and waistband.
  • STYLISH FEATURES: Retro hooded popover jacket in lightweight nylon taslan shell fabric.
  • “Hilfiger” screenprint logo on left sleeve.
  • Embroidered Tommy Hilfiger Flag logo at left chest.
  • VERSATILITY: Easy to pack away and store.
Check Stock

Part# 06H145710D Turbo Diverter Valve For A3 A4 TT Quattro Volkswagen Jetta Passat Beetle CC Eos GTI - Replace Part Number 06F145710G

  • The diverter valve is usually located on the side of the turbocharger. The purpose of the diverter valve is to vent excess boost when the throttle is closed (you lift off the accelerator or change gear). Without venting this excess pressure, the turbo experiences surge which is actually damaging to the turbo..
  • By the same token, when the throttle is open and you are building boost, this valve must stay shut and not vent boost from the high pressure side to the low pressure side. Venting this boost under wide open throttle causes a boost leak and a drop in power..
  • This Turbo Drivter Valve fits for 2006 - 2011 A3, 2010 - 2013 A3 Quattro, 2005 - 2013 A4 , 2005 - 2013 A4 Quattro, 2008 - 2009 TT, 2009 - 2011 TT Quattro, 2009 - 2011 Volkswagen CC 2.0L L4, 2007 - 2011 Volkswagen Eos, 2006 - 2011 Volkswagen GTI, 2006 - 2010 Volkswagen Jetta, 2006 - 2010 Volkswagen Passat, 2012 Volkswagen Beetle 2.0L..
  • Customers also can find the product you need accurately according to the OE number. OEM Number: 06H 145 710 D, 06F 145 710 G, 06F 145 710 C, 06F 145 710 B, 06H145710D, 06F145710G, 06F145710B, 06F145710C..
  • If the valve is defective or inadequate, you will get a loss of boost, extended lag or a throttle response that is sluggish, the turbo charger will wear out soon ....
Check Stock

Suits Season 1-9 [DVD] [2019]

  • J.M. HAGGAR: From the comfort you know and love. The J.M. Haggar suit collection checks all boxes. This classic fit jacket features 2 button, notched lapel, center vent, 4 sleeve button, flap pockets, and piped interior..
  • MATERIAL: The Houndstooth design is made of 69% Polyester, 29% Viscose Rayon, and 2% Spandex for stretch and recovery. The comfort of the stretch is what makes this suit jacket your go-to selection for the office or a formal event..
  • STYLE: The Houndstooth design in the jacket is what sets this apart from other suit separates. The stretch is what will keep you going back to it!.
  • COMFORT: Without a doubt, this suit coat will not hinder your comfort throughout the day. From the stretch built right into the fibers and center vent flexibility, you are sure to not only look good but feel great!.
  • CARE: This suit coat is recommended to be dry cleaned in order to preserve the quality and design..
Check Stock

Class A Customs 40 Gallon RV Waste Black Water Holding Tank WT-4000

  • 40 Gallon RV Waste Water Holding Tank MADE IN THE USA by Class A Customs using Medium Density Polyethylene (MDPE) Resin TANK NOT FOR FRESH OR DRINKING WATER USE – WASTE/GRAY WATER USE ONLY – Used in RV’s Campers, Trailers, Motorhomes and Tiny Houses.
  • INSTALLED OUTLET 3” ABS Female Pipe - outlet can not be moved DO NOT over-tighten fittings damage will occur Dump valves do not hook directly to the 3" ABS fitting, from the outlet run PVC or ABS piping (not included), dump valve (not included) is added to the piping..
  • INLET & VENT INSTALLATION Class A Customs Black Water Tanks only come with the outlet the end user will determine where the inlet and vent will need to be placed and install, hardware NOT included. TANK MUST BE VENTED allowing air in and out when in use. *DO NOT PRESSURIZE TANK* DO NOT over-tighten fittings damage will occur..
  • NOT INCLUDED Inlet and Vent Fittings / Additional Fittings / Hardware / Mounting Hardware / Dump Valve / Piping NOT INCLUDED.
Check Stock

Class A Customs 27 Gallon RV Waste Black Water Holding Tank WT-2700

  • 27 Gallon RV Waste Water Holding Tank MADE IN THE USA by Class A Customs using Medium Density Polyethylene (MDPE) Resin TANK NOT FOR FRESH OR DRINKING WATER USE – WASTE/GRAY WATER USE ONLY – Used in RV’s Campers, Trailers, Motorhomes and Tiny Houses.
  • INSTALLED OUTLET 3” ABS Female Pipe - outlet can not be moved DO NOT over-tighten fittings damage will occur Dump valves do not hook directly to the 3" ABS fitting, from the outlet run PVC or ABS piping (not included), dump valve (not included) is added to the piping..
  • INLET & VENT INSTALLATION Class A Customs Black Water Tanks only come with the outlet the end user will determine where the inlet and vent will need to be placed and install, hardware NOT included. TANK MUST BE VENTED allowing air in and out when in use. *DO NOT PRESSURIZE TANK* DO NOT over-tighten fittings damage will occur..
  • NOT INCLUDED Inlet and Vent Fittings / Additional Fittings / Hardware / Mounting Hardware / Dump Valve / Piping NOT INCLUDED.
Check Stock

Class A Customs 14 Gallon RV Waste Black Water Holding Tank WT-1400

  • 14 Gallon RV Waste Water Holding Tank MADE IN THE USA by Class A Customs using Medium Density Polyethylene (MDPE) Resin TANK NOT FOR FRESH OR DRINKING WATER USE – WASTE/GRAY WATER USE ONLY – Used in RV’s Campers, Trailers, Motorhomes and Tiny Houses.
  • INSTALLED OUTLET 3” ABS Female Pipe - outlet can not be moved DO NOT over-tighten fittings damage will occur Dump valves do not hook directly to the 3" ABS fitting, from the outlet run PVC or ABS piping (not included), dump valve (not included) is added to the piping..
  • INLET & VENT INSTALLATION Class A Customs Black Water Tanks only come with the outlet the end user will determine where the inlet and vent will need to be placed and install, hardware NOT included. TANK MUST BE VENTED allowing air in and out when in use. *DO NOT PRESSURIZE TANK* DO NOT over-tighten fittings damage will occur..
  • NOT INCLUDED Inlet and Vent Fittings / Additional Fittings / Hardware / Mounting Hardware / Dump Valve / Piping NOT INCLUDED.
Check Stock

Class A Customs 31 Gallon RV Waste Black Water Holding Tank WT-3100

  • 31 Gallon RV Waste Water Holding Tank MADE IN THE USA by Class A Customs using Medium Density Polyethylene (MDPE) Resin TANK NOT FOR FRESH OR DRINKING WATER USE – WASTE/GRAY WATER USE ONLY – Used in RV’s Campers, Trailers, Motorhomes and Tiny Houses.
  • INSTALLED OUTLET 3” ABS Female Pipe - outlet can not be moved DO NOT over-tighten fittings damage will occur Dump valves do not hook directly to the 3" ABS fitting, from the outlet run PVC or ABS piping (not included), dump valve (not included) is added to the piping..
  • INLET & VENT INSTALLATION Class A Customs Black Water Tanks only come with the outlet the end user will determine where the inlet and vent will need to be placed and install, hardware NOT included. TANK MUST BE VENTED allowing air in and out when in use. *DO NOT PRESSURIZE TANK* DO NOT over-tighten fittings damage will occur..
  • NOT INCLUDED Inlet and Vent Fittings / Additional Fittings / Hardware / Mounting Hardware / Dump Valve / Piping NOT INCLUDED.
Check Stock

Class A Customs 30 Gallon RV Waste Black Water Holding Tank WT-3000

  • 30 Gallon RV Waste Water Holding Tank MADE IN THE USA by Class A Customs using Medium Density Polyethylene (MDPE) Resin TANK NOT FOR FRESH OR DRINKING WATER USE – WASTE/GRAY WATER USE ONLY – Used in RV’s Campers, Trailers, Motorhomes and Tiny Houses.
  • INSTALLED OUTLET 3” ABS Female Pipe - outlet can not be moved DO NOT over-tighten fittings damage will occur Dump valves do not hook directly to the 3" ABS fitting, from the outlet run PVC or ABS piping (not included), dump valve (not included) is added to the piping..
  • INLET & VENT INSTALLATION Class A Customs Black Water Tanks only come with the outlet the end user will determine where the inlet and vent will need to be placed and install, hardware NOT included. TANK MUST BE VENTED allowing air in and out when in use. *DO NOT PRESSURIZE TANK* DO NOT over-tighten fittings damage will occur..
  • NOT INCLUDED Inlet and Vent Fittings / Additional Fittings / Hardware / Mounting Hardware / Dump Valve / Piping NOT INCLUDED.
Check Stock

Class A Customs 24 Gallon RV Waste Black Water Holding Tank WT-2400

  • 24 Gallon RV Waste Water Holding Tank MADE IN THE USA by Class A Customs using Medium Density Polyethylene (MDPE) Resin TANK NOT FOR FRESH OR DRINKING WATER USE – WASTE/GRAY WATER USE ONLY – Used in RV’s Campers, Trailers, Motorhomes and Tiny Houses.
  • INSTALLED OUTLET 3” ABS Female Pipe - outlet can not be moved DO NOT over-tighten fittings damage will occur Dump valves do not hook directly to the 3" ABS fitting, from the outlet run PVC or ABS piping (not included), dump valve (not included) is added to the piping..
  • INLET & VENT INSTALLATION Class A Customs Black Water Tanks only come with the outlet the end user will determine where the inlet and vent will need to be placed and install, hardware NOT included. TANK MUST BE VENTED allowing air in and out when in use. *DO NOT PRESSURIZE TANK* DO NOT over-tighten fittings damage will occur..
  • NOT INCLUDED Inlet and Vent Fittings / Additional Fittings / Hardware / Mounting Hardware / Dump Valve / Piping NOT INCLUDED.
Check Stock