Top Jaw Type Couplings

Motis - Firefighting Mini Spanners, Lightweight & Portable Spanner Wrench, Must Have Firefighter Tools, Red, 2-Pack

• Ultra-lightweight & Accessible - A practical addition to your set of firefighter tools, our mini spanner weighs only 2.5 ounces each. It fits in your bunker gear pocket, making it easy to access any time, anywhere..
• Heavy-duty - Our mini spanner wrench is made of 6061 T6 aluminum, a metal suitable for tough tasks while firefighting. Small yet sturdy and tough, it excels at getting the job done.Tightens Couplings - Use this firefighter spanner wrench to tighten and secure loose couplings. Whether it’s for a standpipe connection or for an attack line, the spanners work on all caps and couplings on the fireground..
• Tightens Couplings - Use this firefighter spanner wrench to tighten and secure loose couplings. Whether it’s for a standpipe connection or for an attack line, the spanners work on all caps and couplings on the fireground..
• Undoes Couplings - No need to run back to the truck to grab spanners. Keep these mini spanner wrenches in your bunker gear pockets..
• Great Value Pack of 2 - This firefighter spanner wrench comes in pairs..

uxcell Shaft Coupling 12.7mm to 12.7mm Bore L35xD30 Flexible Coupler Joint for Servo Stepped Motor

• General purpose power transmission coupling, also used in motion control applications and rotational power transmissions, is good replacement for your needs..
• It is designed to transmit torque while damping system vibrations and accommodating misalignment to protect other components from damage..
• Jaw couplings have three parts: two metallic hubs and an elastomer insert called an element, but commonly called ""..
• Shaft Usage: 12.7mm to 12.7mm/0.5 inch to 0.5 inchTotal Size: 35 x 30mm / 1.38 inch x 1.18 inch (L*D).
• Wear resistant ,high hardness and excellent response.Super elastic torque can absorb vibration, appropriate a large torque transmission..

TOMMARS 3 pc Ball Joint Puller Set Ball Joint Separator and Tie Rod Puller for Front End Service

• For removal of most types of pitman arms, tie rods and ball joints found on automotive and light truck applications..
• Press type ball joint separator allows for ball joint removal without damage to joint and other parts..
• Adjustable Ball Joint Separator-Press Type:Jaw Depth:1.18''- 1.96'' (30 - 50mm), Jaw Opening : 0.78''- 0.86''(20-22 mm)..
• Ball Joint Splitter: 0.78''(20mm)Jaw opening adjustable up to 1.96'' (50mm). Conical Pitman Arm Puller: Jaw Opening: 0.7''(18mm)..
• ATTENTION:Please measure your ball joint of size before purchasing, and check the specifications of the Ball Joint Separator, whether it is suitable....

uxcell 2pcs Shaft Coupling 6.35mm to 6.35mm Bore L25xD20 Flexible Coupler Joint for Servo Stepped Motor

• General purpose power transmission coupling, also used in motion control applications and rotational power transmissions, is good replacement for your needs..
• It is designed to transmit torque while damping system vibrations and accommodating misalignment to protect other components from damage..
• Jaw couplings have three parts: two metallic hubs and an elastomer insert called an element, but commonly called ""..
• Shaft Usage: 6.35mm to 6.35mm/0.25 inch to 0.25 inchTotal Size: 25 x 20mm / 0.98 inch x 0.79 inch (L*D).
• Wear resistant ,high hardness and excellent response.Super elastic torque can absorb vibration, appropriate a large torque transmission..

5/16 x 4-1/2\ Turnbuckle Jaw Jaw Galvanized Steel 800 LBS Marine Boat Shade Sail

• 5/16" x 4-1/2" Turnbuckle JAW/JAW***** Working Load Limit: 800 LBS (WLL).
• Close length: 10" ****** Thread diameter: 5/16".
• Material: Drop forged carbon steel ****** Finish/Coating: Galvanized.

Sinoblu 1/2 to 1/2inch Flexible Spider Couplings for Servo Stepper Motor Diameter 30mm Length 35mm

• Size：Diameter 30mm Length 35mm/Diameter 1.18inch Length 1.38inch. Bore 12.7-12.7mm/0.5-0.5inch. Type: Plum shaped.
• Material: Using Aviation Aluminum with corrosion resistance High Hardness, High Precision, Anodized Surface Treatment, Strong and Durable. Spider Material (Elastomer) Uses T-PUR, Longer Service Life.
• Super Torque: Can Absorb Vibration, Appropriate a Large Torque Transmission.High Hardness,Durable,and Excellent Response,Not Easy to Loosen.
• Vibration-damping: Flexible Spider Couplings Offset Angular, Radial and Axial Shaft Displacement Within Defined Ranges. The Elastomer Dampens Shock and Torsional Vibrations in The Drive Train.
• Wide Range of Usage: Flexible Couplings is Suitable to Offset Axial, Radial and Angular Displacements and Dampen Vibrations and Torque Shocks for 3D Printer DIY Encoder CNC Router Machine Servo Stepped Motor and Engraving Drilling Milling Machine.

Jonard JIC-63050 High Leverage Cable Cutter with Red Handle, 9-1/4\ Length

• HIGH LEVERAGE DESIGN: Handles are flared outward for superior leverage and cutting ability.
• SHEAR-TYPE JAW: Designed with a shear-type jaw for cutting aluminum and soft copper.
• LARGE CABLE CUTTER: Cuts up to 100-pair 24 AWG cables.
• WIDE JAWS: 1" long x 7/8" wide x 7/16" thick.
• WARNING: Not for use on steel or ACSR type cables.

ABN Snap Ring Pliers Set – 5 Pc Interchangeable Jaw Head C Clip Pliers Set – Straight, 45, and 90 Degree Angled Jaws

• ...g pliers works on internal and external snap ring sizes ranging from 3/8 inch to 2 inch (.95 to 5.08 cm).
• Set includes two straight jaws with different pin sizes, one 45-degree angled jaw, and one 90-degree angled jaw.
• INTERNAL AND EXTERNAL FUNCTION: Reversible joints and reversible, interchangeable jaws allow for 2 types of function on both internal and external retaining rings.
• Circlip pliers can compress or expand snap rings thanks to the dual-sided pivot points, making this automotive tool set extremely versatile in terms of vehicles it is compatible with and projects that it will be able to assist you with.
• Ideal for professional and DIY workshops, garages, and mechanic shops.
• BUILT TO LAST: Constructed from heat-treated steel, the split ring pliers is designed for strength, durability, and longevity.
• This snap ring plier set features black industrial finish to resist rust and corrosion and 3.5-inch (8.9 cm) textured PVC handles to provide an anti-slip grip.
• This spring action c ring pliers set weighs less than .2 lbs. (.09 kg) and fits comfortably in your hands to ensures less user fatigue and more productivity.
• RETAINING RING PLIERS CONTENTS: Kit includes a 5-inch (12.7 cm) snap pliers handle, a spring-loaded jaw locking mechanism, and 4 jaw head....

4-Jaw Self-Centering Chuck Set, Z011 Four Jaw Mini Lathe Chucks w/ Connecting Rod & Wrench, Mini Power Lathe Machine Replacement Parts Accessories (Type C)

• 【3 Jaw or 4 Jaw Self-Centering Chuck Set for Mini Lathe】- Type B comes with 1 x Connecting Rod + 1 x Three Jaw Chuck + 2 pcs x Short Sticks.
• Type C - 1 x Connecting Rod + 1 x Four Jaw Chuck + 1 x Wrench. This chuck connecting rod is suitable for Z011 Three Jaw or Four Jaw Woodworking Mini Lathe Chuck..
• 【Mini Lathe Chuck & Connecting Rod Replacement】- You can use it to replace the old or brocken one. The clamping range of this chuck is between 1.8-56mm, which is suitable for clamping a variety of industrial parts..
• 【Compact Size, Easy to Use】- Mini Lathe Chuck diameter about 48mm, Outer diameter about 12 mm-65 mm, Inner diameter about 1,8mm-56mm.
• 2. Connecting Rod size about 5.2cm x 6mm/2.05x0.24inch (LxD), Connecting Thread about M12x1mm. Perfect for mini metal and wood lathes..
• 【Stainless Steel Chuck Connecting Rod】- The Connecting Rod is made of High carbon steel material, anticorrosion, not easy to rust, durable and sturdy, ensure it has high hardness and can be reused..
• 【Practical Power Lathe Accessories】- Our chuck connecting rod is stable and has great performance while using, it is the ideal choose for you. High accurate connecting rod so that they can better fit with the Mini Lathe Machine Parts..

ArkHardware 3/8\ Jaw & Jaw Turnbuckle Open Body Precision Cast Cable Railing Rigging Stainless Steel Type 316 Marine Grade (3/8\ - 1 Piece)

• ArkHardware 3/8" Jaw & Jaw Turnbuckle open body PRECISION CAST Stainless Steel T 316 Marine Grade..
• Turnbuckle Bodies are UNC Threads.WORKING LOAD LIMIT= 1300 LBS. 1Pcs= WT-1.25 LBS. END FITTING CAN BE SWITCH AS YOU NEE.
• PRECISION CAST-DURABLE TYPE 316 STAINLESS STEEL.

Lisle 47900 Hose Remover Pliers

• For easy removal of 5/32" to 1/2" vacuum and fuel hoses.
• Engage the tube (line) with the black jaw..
• This sharpened jaw actually "digs" into the tube to grip it squeeze and the hose is easily pushed off by the silver jaw..

Lindstrom RX7590 - RX Series Ergonomic Pliers - Round Nose - Fine Jaw - 4.72 L