Top Jaws Two Part Cone

ATPEAM Battery Terminal and Wiper Arm Puller Remove Tool Heavy-Duty Arm Bearing Remover Puller Repair Tool Kit 6-28 mm

  • Great Material: Made of 45 # carbon steel, strong metal with special heat treatment process, high hardness, corrosion-resistant forged and heat treated steel jaws, can serve for long time.
  • Size: Jaw opening: 1/16" - 1-1/16" (6-28mm).
  • Easy to Use: Tighten knurled cone to force jaws under the cable clamp, turn center screw to lift clamp off terminal, the puller screw pad is designed to fit the top of the spline post for easy pulling..
  • Multifunction: Windshield Wiper Removal Tool is also can be used to remove bolted-on windshield wiper arms that fit over a tapered spline..
  • Package Included: 1 x Wiper Arm and Battery Terminal Bearing Remover Puller Tool.
Check Stock

OTUAYAUTO Battery Terminal and Wiper Arm Puller

  • This Puller designed for professionally dual-purpose use.
  • Easy and safely to remove the stuck on the rear wiper arm.
  • Use to remove battery terminal clamp without damage to cause battery post.
  • Tighten knurled cone to force jaws under the cable clamp. Also removes bolted on windshield wiper arms that fit over a tapered spline.
Check Stock

Milescraft 4017 ClampAnchors - Bench Clamp Base Set

  • Data:Net weight 3.7 lbs, Maximum width of jaw opening 3.0 inch, Jaw width 2.75 inch.
  • Wide range of applications: V60 vise is ideal for small parts such as home, jewelry, hobbies, model making, electronics, etc., providing clamping for light applications. Round, square and other shaped part can be processed.
  • Flexible use: Rotate the control handle to rotate the vise body to the desired position, and move the rotary control handle to firmly fix the vise body. The vise body can be rotated 360° on its base, even if you are used to the left hand, there will be no hindrance. It is very convenient to disassemble and install.
  • Durable: The jaws are quenched and normalized to increase the hardness and toughness of the jaws and are durable.
  • Non-slip design: The anti-slip texture on the inner side of the jaws increases the clamping force of the jaws, and does not slip.
  • it lays a good foundation for your smooth completion..
Check Stock

OTC 6542 Bearing Cup Remover

  • OTC's 6542 Bearing Cup Remover tool is ideal for servicing hubs on today's popular front-wheel-drive small cars.
  • Tapered metal cone holds the jaws securely in place during pulling.
  • Perfect for pulling internal bearing cups, seals, bushings, etc..
  • Jaw spread is 15/16 inch to 3-1/4 inches and reach is 3-1/2 inches.
  • use with any 5/8-18 threaded slide hammer such as OTC's No. 1155 or 1156 as well as OTC's No. 927 Push-Puller.
  • High-grade materials ensure quality performance over the lifetime of the tool.
Check Stock

Alfie Pet - Noah Recovery Collar (for Dogs and Cats) - Pattern: Lion, Size: XXL

  • Size XXL best fits neck girth 12.5" to 14" with the overall depth of 9".
  • Ideal for injuries, rashes and post surgery. Work great for both cats and dogs.
  • Light in weight, soft and comfortable but may not cover all body part of the pet. Owner should monitor in the beginning as pet may chew the collar.
  • Unique closure enables the owner to tighten or loosen, as necessary.
  • Pets can eat, sleep, and drink normallyDescriptionWhat is a recovery coneThe primary purpose of the cone is to prevent pets from directly traumatizing the surgical site or injured area by chewing or scratching. Although some animals initially dislike the cone and try to remove it, most quickly adapt. The flexibility of the cone does increase the chance of restless animals being able to reach injured areas. Some pets have been successful flip over the cone or even have it removed. To avoid accidents or further injury, it's important to directly supervise your pet during the first few hours of wearing a cone.My pet doesn't like wearing itIf your vet prescribes a cone for your pet following surgery or injury, there are simple things you can do to make the recovery process a little easier on them. It may take a little time for your pet to adjust to wearing a cone, but by projecting a positive at....
Check Stock

Alfie Pet - Kora Recovery Collar (for Dogs and Cats) - Color: Red, Size: Medium

  • Medium size best fit neck girth 7" - 8.5" and is 6" depth.
  • Ideal for injuries, rashes and post surgery. Work great for both cats and dogs.
  • This flower petals design recovery collar is light in weight, soft and comfortable but may not cover all body part of the pet. Owner should monitor in the beginning as pet may chew the collar.
  • Unique velcro closure enables the owner to tighten or loosen, as necessary.
  • Pets can eat, sleep, and drink normallyDescriptionWhat is a recovery coneThe primary purpose of the cone is to prevent pets from directly traumatizing the surgical site or injured area by chewing or scratching. Although some animals initially dislike the cone and try to remove it, most quickly adapt. The flexibility of the cone does increase the chance of restless animals being able to reach injured areas. Some pets have been successful flip over the cone or even have it removed. To avoid accidents or further injury, it's important to directly supervise your pet during the first few hours of wearing a cone.My pet doesn't like wearing itIf your vet prescribes a cone for your pet following surgery or injury, there are simple things you can do to make the recovery process a little easier on them. It may take a little time for your pet to adjust to wearing a....
Check Stock

Alfie Pet - Noah Recovery Collar (for Dogs and Cats) - Pattern: Sunflower, Size: XXL

  • Size XXL best fits neck girth 12.5" to 14" with the overall depth of 9".
  • Ideal for injuries, rashes and post surgery. Work great for both cats and dogs.
  • This sunflower design recovery collar is light in weight, soft and comfortable but may not cover all body part of the pet. Owner should monitor in the beginning as pet may chew the collar.
  • Unique closure enables the owner to tighten or loosen, as necessary.
  • Pets can eat, sleep, and drink normallyDescriptionWhat is a recovery coneThe primary purpose of the cone is to prevent pets from directly traumatizing the surgical site or injured area by chewing or scratching. Although some animals initially dislike the cone and try to remove it, most quickly adapt. The flexibility of the cone does increase the chance of restless animals being able to reach injured areas. Some pets have been successful flip over the cone or even have it removed. To avoid accidents or further injury, it's important to directly supervise your pet during the first few hours of wearing a cone.My pet doesn't like wearing itIf your vet prescribes a cone for your pet following surgery or injury, there are simple things you can do to make the recovery process a little easier on them. It may take a little time for your pet to adjust to wearin....
Check Stock

Greatest Hits

  • The King Kone pre-roll cone filling machine is perfect for small farms or companies just expanding into pre rolls. Not just budget friendly, this cone filling machine is also extremely versatile and easy to use. Our electric cigarette rolling machine will increase production, keep your cones/prerolls sizes consistent, and save you money!.
  • Our preroll machine comes with all the attachments, it can pack 1/2G 84mm pre rolled cones, 3/4G 98mm pre rolled cones, and 1G 109mm king sized pre-rolled cones! Set up the proper cone filling trays, load the cones, and start filling the top tray with your product..
  • With the adjustable knob, control how hard and fast the cone filling machine is packing. Once filled, just tap to your desired pack and twist the pre-roll closed! Fit up to 169 cones, you'll be producing pre-rolls at scale in no time..
  • Most pre roll ciggaret rolling machine cost upwards of 5,000 - well not this automatic cigarette rolling machine! Since it is industrially 3D printed here in the United States, we are able to offer a highly efficient pre rolled cone filling machine that can pack most common cone sizes for mu....
Check Stock

SMOTIVEPRO Professional Radiator Pressure Tester Kit and Vacuum Type Coolant Refilling Kit with Universal Rubber Radiator

  • Easy Work: This radiator pressure tester kit is easy to work for both testing leakage in the radiator system and the Vacuum Type Coolant Refilling Kit can quickly change the coolant in vacuum situations, you can keep your car running smoothly..
  • Specification: Thanks to this coolant pressure tester kit has a universal rubber adapter and is compatible with most domestic and import vehicles on the market. You can always help your friends or neighbors change their antifreeze, even if you have different car models.
  • Universal Adapter Design: If you have this coolant vacuum refill kit, you can eliminate the need to purchase unnecessary and expensive adapters, because this adapter has two jaws to hold the cone rubber on the connector and maintain good airtightness..
  • Sturdy and Durable: Copper coolant system vacuum and refiller better airtightness of antifreeze filling system than nylon plastic, thickened rubber sleeve prevents damage to the vacuum pressure gauge.
  • Operating Instructions: We are the manufacture and the brand owner specialized in Auto Tools, The product comes with detailed instructions, as well as operating videos, so that you can complete the task more quickly and easily..
Check Stock

Amerbm Heavy Duty Pitman Arm Puller Adjustable Jaws Bearing Puller Pull & Repair Pitman Arms, Bearings, Collars, Gears, More Light Truck & Car Repair Tool

  • Application: Amerbm heavy duty pitman arm puller is designed to remove the pitman arm shaft in cars and light trucks 3/4 ton. It can also be used for bearing, collar and gear removal..
  • Design: Features forged adjustable jaws and two clamp bolts that lock jaws together. Two clamp bolts lock the jaws on the pitman arm ensuring a solid grip..
  • Material: Made of #45 carbon steel, black oxide finish resists corrosion and rust. Adjustable and have rugged forged jaws shaped to fit the job..
  • Function: Pressure screw has ball head designed for striking. This tool includes an adapter for added versatility and both pullers cover a variety of pulling jobs. Similar to OEM 27170..
  • Package: Pressure Screw, H-Frame, Jaw Bolt, Jaw, Clamp Bolt and Wing Nut, Pressure Screw Adapter..
Check Stock

Senyar Exhaust Pipe Expander Tool Set, Tail Expander Kit 1‑1/18in to 3‑1/2in Steel Muffler Spreader with Storage Case

  • 【Suitable For】This tail pipe expander is suitable for all LCD monitors from 1-1/8 inches to 3-1/2 inches. Thin-walled tube, versatile. It is used to extend the length of the pipe proportionally so that the pipe has the same diameter instead of a cone. Please double check the part number of your item before you buy, matching information is for reference only..
  • 【Quality Steel Material】The exhaust muffler adopts a forged and heat-treated steel structure to improve strength and durability. This product includes three different expander sizes. It is used to extend the length of the pipe proportionally so that the pipe has the same diameter instead of a cone. Install the auto parts on the standard exhaust system..
  • 【Easy to Use】The pipe can be expanded with a simple wrench turning to repair and install the exhaust system. Simply choose the correct size expander for your pipe, insert it into the damaged pipe end, and turn the rotating rod of the expander until the dent is removed..
  • 【Prevent Loss】We provide a sturdy storage box, the terminal can be placed in any shelf or storage area after use, it can effectively prevent the loss of tools..
  • 【Suitable For】This tail pipe expander is suitable for all LCD monitors from 1-1/8 inches to 3-1/2 inches....
Check Stock

Cheech & Chong's Up in Smoke

  • The King Kone pre-roll cone filling machine is perfect for small farms or companies just expanding into pre rolls. Not just budget friendly, this cone filling machine is also extremely versatile and easy to use. Our electric cigarette rolling machine will increase production, keep your cones/prerolls sizes consistent, and save you money!.
  • Our preroll machine comes with all the attachments, it can pack 1/2G 84mm pre rolled cones, 3/4G 98mm pre rolled cones, and 1G 109mm king sized pre-rolled cones! Set up the proper cone filling trays, load the cones, and start filling the top tray with your product..
  • With the adjustable knob, control how hard and fast the cone filling machine is packing. Once filled, just tap to your desired pack and twist the pre-roll closed! Fit up to 169 cones, you'll be producing pre-rolls at scale in no time..
  • Most pre roll ciggaret rolling machine cost upwards of 5,000 - well not this automatic cigarette rolling machine! Since it is industrially 3D printed here in the United States, we are able to offer a highly efficient pre rolled cone filling machine that can pack most common cone sizes for much less. There is no need to purchase costly trays for every cone size because ours comes with two!.
  • Your KIng Kone 3D printed cone rollin....
Check Stock