Top Jig Boring Machine

Tormek T-4 Chef’s Kit (Tormek T-4 Original Sharpener + KJ-45 Centering Knife Jig + KJ-140 Wide Centering Knife Jig + SVM-00 Small Knife Holder Jig + SVX-150 Scissor Jig + MH-380) (US Version)

  • This bundle combines the Tormek T-4 water-cooled sharpening system with the jigs trusted by chefs around the world..
  • This Tormek T-4 Chef’s Kit includes all the jigs to keep your kitchen knives and tools sharp. Use the KJ-45 for your knives, the KJ-140 for the longer knives, the SVX-150 for your scissors, and the SVM-00 for small knives. When you are all finished, cover your machine with the MH-380 machine cover to keep it nice and tidy..
  • The Tormek T-4 Original is Tormek’s 8 inch sharpener. It is a low RPM, water-cooled sharpening system that is built for precision sharpening and long tool life. It will keep your tools and accessories razor sharp and always ready to work. Includes both a grinding and honing wheel.
  • Includes: Tormek T-4 Original, PA-70 Honing Compound, SP-650 Stone Grader, WM-200 Angle Master, KJ-45 Centering Knife Jig, KJ-140 Wide Centering Knife Jig, SVM-00 Small Knife Holder Jig, SVX-150 Scissor Jig, and MH-380 Machine Cover.
  • Note: This low RPM machine operates at 115 volts and is designed to work exclusively in North America. If you plan on using this product in a country that operates at 220-240V, you will cause damage to the motor and machine..
Check Stock

Amana Tool 203351 Carbide Tipped Hinge Boring Drill Bit 35mm Dia x 57mm Long x 10mm Right Hand

  • HINGE BORING BIT – The Amana Tool Carbide Tipped Hinge Boring Bit allows you to bore a recess into your workpiece for cup hinges to be installed..
  • DESIGNED FOR – Boring machine bit (10mm shank) and boring drill bit presses (3/8" shank)..
  • DRILL CLEAN HOLES – Use the boring drill bits for wood and boring drill bits for metalworking, they provide clean and accurate hole cutting every time..
  • PERFECT SIZE – The hinge drill bit features sharp, fine blades for perfect drilling each time. (D) diameter: Boring bit 35 mm. Overall length (L): 57mm. Rotation: right hand..
  • INDUSTRIAL-QUALITY TOOLS – Amana Tool is a worldwide leading tool provider with USA-based corporate headquarters and warehouse, specializing in industrial-quality cutting tools..
Check Stock

Amana Tool 203202 Carbide Tipped Hinge Boring Drill Bit 20mm Dia x 70mm Long x 10mm Shank Right Hand

  • HINGE BORING BIT – The Amana Tool Carbide Tipped Hinge Boring Bit allows you to bore a recess into your workpiece for cup hinges to be installed.
  • DESIGNED FOR – Boring machine bit (10mm shank) and boring drill bit presses (3/8" shank)..
  • DRILL CLEAN HOLES – Use the boring drill bits for wood and boring drill bits for metalworking, they provide clean and accurate hole cutting every time..
  • PERFECT SIZE – The hinge drill bit features sharp, fine blades for perfect drilling each time. (D) diameter: Boring bit 20 mm. Overall length (L): 70mm. Rotation: right hand..
  • INDUSTRIAL-QUALITY TOOLS – Amana Tool is a worldwide leading tool provider with USA-based corporate headquarters and warehouse, specializing in industrial-quality cutting tools..
Check Stock

iCarbide 3/4 Shank Indexable Boring Bar 6pcs Set with 6pcs Carbide Inserts

  • Sclcr Boring Bar 1-1/2" Shank Diameter, Overall Length 14”.
  • Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
  • OSCARBIDE boring bars Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • CCMT120408( CCMT432) Carbide Inserts 80 degree，negative 5 degree end & side cutting angle.
  • For semi-finishing and finishing operations.
Check Stock

Collins Tool Company Coping Foot

  • Turns your jigsaw into a simple and accurate coping machine without the need for jigs and templates.
  • The Coping Foot is formed from 14 ga. plated steel. Youll wear out a couple of jig saws before you wear out your Coping Foot..
  • Fits most jig saws except for Porter-Cable, and the Bosch 1590 and 1591.
  • Will not work on Festool Carvex, get the Collins Festool Carvex Coping Foot instead.
Check Stock

Coping Foot，Foot Tool for Jigsaw Compatible with Most jigsaws，High Efficiency Woodworking Tools for Jigsaw

  • Fit for Most Jigsaw：Our Copying tools Fit for most jig saws except for Porter-Cable, and the Bosch 1590 and 1591. A variable speed jig saw is....
  • Improve You work Efficiency:Our Copying tools make your jigsaw become a simple and accurate coping machine without the need for jigs and....
  • Tough Steel Construction：Made of plated steel to last a lifetime.Our Coping Foot is formed from 14 ga.Size：4.4 x 3.4 x 1.2 inche Made in....
  • Easy To Install：Our Coping Foot is easy to install and remove to different kinds of jig saws with a few minutes. Easy to learn How to install Our....
  • What You Get：A Tough Steel Construction Coping Foot for Most Jigsaw.Simply email us back if our product ever fails you and we'll mail you a new....
Check Stock

OSCARBIDE 5/8''by 8''Indexable Boring Bar Right-Hand Sclcr Boring Bar with CCMT09T304(CCMT32.5),1 Piece

  • Sclcr Boring Bar 5/8" Shank Diameter, Overall Length 8”.
  • Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
  • Indexable Boring Bar Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • CCMT09t304(CCMT32.5) Carbide Inserts 80 degree,negative 5 degree end & side cutting angle.
  • Replacement insert for this kit ,please search the Asin of this item:B07W7PVWR1 to buy it.
Check Stock

OSCARBIDE 3/4'' x 10'' Indexable Boring Bar with 10 Pieces Carbide Inserts CCMT09T304(CCMT32.5),Right-Hand Sclcr Boring Bar

  • Sclcr Boring Bar 3/4" Shank Diameter, Overall Length 10”.
  • Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
  • Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • CCMT09t304(CCMT32.5) Carbide Inserts 80 degree,negative 5 degree end & side cutting angle.
  • Packing:1 pc 3/4'' x 10'' RH SCLCR Indexable Boring Bar with 10pcs carbide inserts CCMT09T304(CCMT32.5).
Check Stock

OSCARBIDE 1/2 x 7 Indexable Boring Bar with 10 Pieces Carbide Insert CCMT09T304 CCMT32.5 Right-Hand Sclcr Boring Bar

  • Sclcr Boring Bar 1/2" Shank Diameter,Overall Length 7”.
  • Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient,good wear resistance.
  • Used for Turning internal hole,reaming,copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • CCMT09t304(CCMT32.5) Carbide Inserts 80 degree,negative 5 degree end & side cutting angle.
  • Packing:1 pc 1/2'' x 7'' RH SCLCR Indexable Boring Bar with 10pcs carbide inserts CCMT09T304(CCMT32.5).
Check Stock

Slab Jig – Router Sled for Woodworking – Levels Wood Slabs Up to 64 Inches Wide! Portable, Durable, and Easy to Adjust! Great for River Tables and Home Improvement Projects!

  • SAVE TIME AND MONEY ON WOODWORKING – Use a Slab Jig to level your woodworking projects without the high cost of a CNC machine! Cut your wood slabs down to size while saving time and money!.
  • COMPATIBLE WITH MOST ROUTERS – Slab Jigs are adjustable to fit most fixed based routers, so you can level out large wood slabs, fast and easy! If you’re looking for a cost-efficient router guide, look no further than a slab flattening jig!.
  • FULLY ADJUSTABLE – Adjust your new router jig to fit a wide variety of table sizes! Easily plane slabs up to 64 inches wide!.
  • BUILT TO LAST – Slab Jigs are built TOUGH! Our router planer rails are made from high-quality machined aluminum, meaning they won’t bend or warp, even after lots of heavy use! Like other products from Stone Coat Countertops, your Slab Jig will last for years to come!.
  • EASY TO ASSEMBLE – Includes all the parts you need to put together your new router planing sled in a matter of minutes! Then, you’ll be ready to work on river tables, plane wood slabs, and so much more!.
Check Stock

HXLPAY Radius Jig Router Templates Corner Routing Templates, ABS+CNC high Hardness Processing Glue, Rounded Corners Bit R5 R10 R15 R20 R25 R30 R35 R40 (1 Set of 4 Packs)

  • [Size]: The set includes R5, R10, R15, R20, R25, R30, R35, and R40 type corner radius quick clamps, 8 radius angle options..
  • [Professional woodworking tools]: It is designed with three holes to prevent cutting. This set of tools allows you to trim the edges and corners of the board. We call it Radius Quick-Jig (Corner Jig). Use these to cut the outer radius! Practical and professional woodworking tools can make the work smooth and efficient..
  • [Easy to use]: To use, just select the corner of the template to be copied and place it on the desired corner of the wood. A complete set of professional tools, easy to use, allows you to save time, and is still trying to freely handle corners in your woodworking projects..
  • [Product usage name 1]: corner jig corner radius routing templates corner jig router corner radius jig corner routing templates hxlpay radius jig router templates juice groove jig radius corner jig router radius guide woodworking radius jig router templates radius router templates radius routing template radius template radius template router round corner router templates..
  • [Product usage name 2]: router bit radius router corner jig set router corner jig router corner radius router corner radius jig router corner radius template router ....
Check Stock

VEVOR Vari-Grind Jig, 3/4' Diameter of the Hole Vari-Grind Attachment, Fit for 0.63' Bowl Gouges Grinding Jig with Vari-Grind, Large Hole Vari-Grind Attachment for the Wolverine Sharpening System

  • Protective Washers: The vari-grind jig is equipped with scratches resistance equipment. A plastic washer is added to the metal inside the support to fix the rod to avoid friction with the rod that needs to be processed and thus damage the machine and items..
  • Widened Aperture: The aperture has been widened. The dimensions of the grinding jig are accurate. The diameter of the inlet and outlet holes is 0.7" / 18 mm, the distance between the inlet and outlet holes is 2.5" / 64 mm.
  • suitable for the diameter of the gouges is 0.6" / 16 mm..
  • Black Coating Surface: vari-grind attachment surface by spraying powder coating to the support surface with powder spraying equipment. Powder spraying is superior to spray paint in mechanical strength, adhesion, corrosion resistance, and aging resistance..
  • Easy to Install: The vari-grind side grinding jig is integrated for effortless installation. We will provide a hexagonal handle that can be installed by hand. Put the rod that needs to be processed into the hole, tighten the screw to fix the rod, and you can operate it on the grinder..
  • Wide Application: The lathe tool sharpening jig is widely used, mainly for grinding machines, to fix metal or wood blocks that need to be polished. It is designed to be used with the wolveri....
Check Stock