Top Joints And Connections

Borosilicate Glass Allihn Condenser with 19/22 Joint 200mm Jacket Length φ8mm Lab Glass Condensor,Adamas-Beta

  • Allihn style reflux condenser with a standard taper outer joint at the top and a lower inner drip tip joint. Hose connections have 8 mm at the middle serration..
Check Stock

Everflow Supplies HR-AA-14COMP-NL Compression Tee Hammer Arrestor 1/4" OD Copper

  • SHOCK PREVENTION: stops pipe banging noise common in the plumbing system.
  • REDUCE STRAIN: mini water hammer arrestor reduces the pressure on plumbing system joints.
  • EASY INSTALL: installation of hammer arrestor only requires simple tools.
  • FLEXIBLE: can be installed horizontally or vertically, either way.
  • TEE CONNECTIONS: 1/4” OD x 1/4” Female OD Type AA.
Check Stock

WOD PTST35S Plumbers Pipe Teflon Thread Seal Tape - 1/2 inch x 520 inch (Case of 100 Rolls) - Leak Proof Sealant for Water, Gas, Oil, Most Chemicals, Hydraulic and High Pressure Lines

  • SAFE AND SEALED - WOD pipe thread seal tape was design to be leak-proof joints, perfect and supremely efficient in almost all the high-pressure connections such as new shower heads, NG connections, and freon high-pressure connections. WOD pipe sealant tape is the synonym to quality, service, selection and support. Meets Federal Military Spec # T-27730A & UL31 RO.
  • EASY TO USE - WOD PTFE Tape is easy to apply simply wrap threads and apply fittings - no waiting for drying or curing.
  • can be easily removed after years. The teflon seal tape is made to create an airtight seal which will last for a lifetime. These tapes are known for their durability and will never crack or harde. The professional plumbers tape choice for fool-proof thread seals on water pipe, air hoses, water systems, plumbing fixtures, plastic spool and shells, plumbers, and pipe fitters..
  • HIGH TEMPERATURE RESISTANCE - WOD Plumbers thread tape holds in temperatures from -450F to 500F. They Can be applied across commercial & home appliances, sprinklers, shower heads, gas heaters, propane and pipe fittings. Works For Both Air And Water - Plastic and Metal Pipe Fittings.
  • STANDARD GRADE - Standard quality for home, commercial and industrial uses, good for gas, drinking water pipes, and garde....
Check Stock

stonylab Glass Coil Reflux Condenser, Borosilicate Glass Dimroth Reflux Coil Style Condenser with 24/40 Joints and Hose Connections, 205 mm Overall Length

  • More efficient because of more cooling surface.
  • Borosilicate glass, heavy duty and reusable.
  • Warranty: StonyLab 1-year limited warranty.
  • if received damaged, please contact us immediately.
Check Stock

SUPPLY GIANT QQDB0034-5 Pexflow PPCA0012-5 Plastic Poly Alloy Swivel Adapter Pex x FPT Barb Pipe Fitting, 1/2 x 1/2, White

  • COMPATIBLE WITH: a 1/2 in. PEX and a 1/2 in. MPT pipe.
  • SUPERIOR QUALITY: highly durable lead free poly-alloy construction.
  • BARB AND FPT CONNECTIONS: for secure, leak free joints.
  • CERTIFICATIONS: ASTM F2159-F877, NSF-PW, CSA B135. 5.
Check Stock

Supply Giant QQTM1212-5 Plastic Poly Alloy 90 Degree Swivel Elbow PEX x FPT Barb Pipe Fitting 1/2'' x 1/2'' White (5 Pack)

  • COMPATIBLE WITH: a 1/2 in. PEX pipe and a 1/2 in. MPT pipe.
  • SUPERIOR QUALITY: highly durable lead free poly-alloy construction.
  • BARB AND FPT CONNECTIONS: for secure, leak free joints.
  • CERTIFICATIONS: ASTM F2159-F877, NSF-PW, CSA B135.5.
Check Stock

SUMERAIN Pot Filler Faucet Wall Mount,Brushed Nickel Finish and Dual Swing Joints Design

  • Pot filler faucet wall mount adds the convenience of water to fill pots while on your stove or cooktop.
  • Dual swing joints with approximately 24" extension.
  • Brushed nickel pot filler with dual handle design for easy operation..
  • Pot fillers wall mount with NPT 1/2" or 1/2" NPSM connecting thread,designed to easily install with standard U.S. plumbing connections for saving....
  • Sumerain Preferred Authorized Online Dealer for Guaranteed Warranty Coverage,all items covered under Sumerain's limited lifetime warranty..
Check Stock

Minneer Q235 Joist Steel Brackets，2” x 4” Concealed Flange Light Joist Hanger for Wood Rail, 3.7” (Pack of 24)

  • Material: Carbon steel Q235B, Surface treatment: powder coating.
  • Size: (5-1/2"+5-1/2")x3" (140+140)x76mm, Thickness: 3mm (11 Gauge).
  • Hole size: φ10mm (Bolt not included), Hole spacing (on center): 60mm (2⅜ inch).
  • Black Steel tie weight: 490g (1 pcs), 2090g (4 pcs).
  • 45 degree angle joints in roofs, pergolas, fences and decks for a variety of connections and splices where extra strength is needed..
Check Stock

Laboy Glass Vacuum Cold Trap 2-Part with 10 mm Serrated Hose 200mm Length Below The 24/40 Joint for Schlenk Line Organic Chemistry Lab Glassware

  • DESIGN----This is a two-piece design vacuum cold trap,the connections on the uppper parts are with serrated hose connection,The center tube with 10mm hose connections for easy connection to a vacuum gas manifold bank tubes which are also with 10mm hose connections.The serration hose connection on the side tube have an O.D.of 13mm at the smallest serration and 16mm at the largest serration. The lower part is a thick wall round bottom tube with standard taper outer joint..
  • USE----It is used to place between the experimental apparatus and the vacuum source to protect the vacuum pump,pump oil,pump pipe from contamination and the potentially damaging effects of the material,protect people who must work on the vacuum lines,prevent vapors from being emitted back into the reaction system.In a schlenk line,the vacuum trap is usually connected to the vacuum bank of the vacuum gas manifold.
  • DIMENSIONS-----This vacuum trap has 24/40 joints to assemble the two parts together, The O.D of the outer body is 30mm,the outer body below the joint is 200mm,the O.D.of the inner and side tube is 10mm..
  • HEAVY WALL ---This lab glassware is heavy-wall designed , made by hand-blowing according to ASTM E438 ,made of high-quality borosilicate glass and annealed at 800 degree Celsiu....
Check Stock

Laboy Glass Graham Condenser Coiled with 24/40 Joints 300mm in Jacket Length Distillation Apparatus Inland Revenue Condenser Lab Glassware with 10 mm Glass Hose Connections

  • The graham-style condenser having the configuration that the jacket tube contains coolant,and condensation takes place inside the inner tube or coil includes Liebig condenser,Allihn condenser,West condenser,Graham condenser. A graham condenser consists of an inner spiral surrounded by an outer jacket tube ,maxmises collected condensate because all the vapors must flow through the entire length of the spiral,thereby having prolonged contact with the coolant..
  • Graham condenser also called Inland Revenue condenser,usually used in the downward distillation or vacuum evaporations , installed vertically to prevent liquid pooling in the tube. It is very similar to the coiled condenser but differentiated by an inverted coolant/vapor configuration..
  • This Graham condenser is designed with 24/40 standard taper joints at top and bottom to fit the distillation flask and other lab jointed glassware apparatus,with 10mm glass hose connections and a jacket length of 300mm.
  • Laboy glass condensers are all made of high quality boroslicate glass according to ASTM E438,heavy wall design,durable and reusable.The ground joints are precisely grounded according to US standard..
  • 100% 90 DAY MONEY BACK GUARANTEE simply return for a full refund without any reason.
Check Stock

Deck Mount Pot Filler Faucet Brushed Nickel Finish with Extension Shank and 20\ Dual Swing Joints Spout, SUMERAIN

  • Deck mount pot filler faucet adds the convenience of water to fill pots while on your stove or cooktop..
  • Extension shank for installing max deck thickness 3-1/16"(78mm) on granite.
  • Dual swing joints with approximately 20" extension and Dual handle design for easy operation.
  • 1/2" connecting thread,designed to easily install with standard U.S. plumbing connections for saving man-hour cost during installing.
  • Sumerain Preferred Authorized Online Dealer for Guaranteed Warranty Coverage,all items covered under Sumerain's limited lifetime warranty.
Check Stock

SYKRSS 2.0' Stainless Steel Butt Joint Exhaust Seal Band Clamp

  • Universal butt joint exhaust clamp fit for 2.0" OD pipe to 2.0" OD pipe, mufflers ect. quickly connect the exhaust pipe, It is removable and reusable.
  • It provides a full 360 °equal distribution of stretching forces to prevent leaks and control material distortion while complesing a seal round the joined exhaust components.
  • Full clamping area to create the best seal available without distorting pipe, muffler inlets, outlets, elbow joints, flex tubing and other system connections.
  • The butt joint exhaust clamp is made in stainless steel material, not easy to rust, corrosion resistance.
  • SYKRSS is the responsible brand, strive to offer a high-quality product and service. if you encounter any problems during the installation process, feel free to contact us via Amazon Mail. We provide 24-hour mail service and will help you as soon as possible.
Check Stock