Top Juki Servo Driver

Aoicrie 5pcs PCA9685 16 Channel PWM Servo Motor Driver PCA9685 IIC Module 12-Bit, for Robot or for Raspberry pi Shield Module servo Shield

  • It is 5V compliant, which means you can control it from a 3.3V microcontroller and still safely drive up to 6V outputs (this is good for when you want to control white or blue LEDs with 3.4+ forward voltages)..
  • Communication Interface: IIC, PCA9685 contain an I2C-controlled PWM driver with a built-in clock..
  • 6 address select pins so you can wire up to 62 of these on a single i2c bus, a total of 992 outputs..
  • 12-bit resolution for each output - for servos, that means about 4us resolution at 60Hz update rate..
  • 16 Channel PWM/Servo Driver IIC interface-PCA9685 for arduino or for Raspberry pi shield module servo shield..
Check Stock

Industrial Sewing Machine Juki DDL-8100 Lockstitch Servo Motor + Table Stand Cut Juki DDL8700 + LED Lamp+ Commercial Grade Sewing Machine

  • ✅ASSEMBLY REQUIRED, please note machine comes unassambled, with sewing machine table and Electronic 550 watts Energy saver and Quite Running DC Servo Motor..
  • ✅Included accessories in the machine 8100e head: : Bobbin Winder Thread Stand Machine Oil Instruction Manual Oil Pan Knee Lifter V Belt.
  • ✅Juki DDL-8100 Single Needle Lockstitch Industrial Sewing Machine ( NOT a walking foot).
  • ✅Up to 4500 stitches per minute Identical to and replaces DDL-8500 models Replaces popular DDL-MS and DDL-888 models, but has more speed Single-needle Lockstitch Maximum foot lift: 13 mm Maximum stitch length: 5 mm Maximum stitches: 6 stitches per inch. Needles: 9-18 DBX1 (16x231) up to size 19 Sewing Speed max.: 5,500 spm Stitch Length max.: 5 mm Presser Foot Lift by hand, max.: 5.5 mm.
  • by knee, max. 13 mm Needle Bar Stroke 30.7 mm Hook: auto-lubricating full rotary hook.
Check Stock

Juki Bobbin Case for TL Series Sewing Machines

  • Authentic Juki brand package of 5 plastic drop-in bobbins for all Juki household sewing machines except TL series..
  • Use with Juki Models: -HZL F600 -HZL F400 -HZL F300 -HZL G210 -HZL G110 -HZL K85 -HZL K65 -HZL 35Z -HZL 29Z -HZL 27Z.
Check Stock

Yamata FY335A 10\ Arm Cylinder Bed Walking Foot Sewing Machine with Servo Motor and Table.Assembly Required.DIY

  • ✅It come complete with sewing machine table, servo motor, everything (drawer, belt, tools, lamp and instruction manual) brand new, packed in sealed boxes and never been used before. Knockdown Table .DIY, professional assembly may required !.
  • ✅Included accessories in the machine 8100e head: : Bobbin Winder Thread Stand-Machine Oil- Instruction Manual -Oil Pan- Knee Lifter.
  • ✅Juki DDL-8100e Single Needle Lockstitch Industrial Sewing Machine ( NOT a walking foot).
  • ✅Up to 4500 stitches per minute Identical to and replaces DDL-8500 models Replaces popular DDL-MS and DDL-888 models, but has more speed Single-needle Lockstitch Maximum foot lift: 13 mm Maximum stitch length: 5 mm Maximum stitches: 6 stitches per inch. Needles: 9-18 DBX1 (16x231) up to size 19 Sewing Speed max.: 5,500 spm Stitch Length max.: 5 mm Presser Foot Lift by hand, max.: 5.5 mm.
  • by knee, max. 13 mm Needle Bar Stroke 30.7 mm Hook: auto-lubricating full rotary hook Industrial Sewing Machi.
Check Stock

Juki Original - Industrial Single Needle Sewing Machine Bobbins 12 Pack (Original Juki Part) Made in Japan

  • Original Genuine Juki Parts (Made In Japan).
  • Juki Bobbins Come in Sealed Juki Bags with Bar Codes / Do Not Accept unsealed Bags.
Check Stock

Juki Brand Lower Knife #13150701 and Upper Knife #11845807 EKONOPAK for Juki Overlock/Serger Industrial Sewing Machines

  • This Juki Genuine Part comes in a sealed Juki plastic wrapper with a UPC code.. Do not accept otherwise ..
  • Fits Juki Overlock/Serger Industrial Sewing Machines MO-3700 SERIES / MO-3600 SERIES / MO-6700 SERIES.
  • Ekonopak includes 1 knife each total of 2 knives.
  • Lower Knife Part #13150701 and Upper Knife Part #11845807.
Check Stock

sb components Motor Driver Board for The BBC Micro bit 2 Channel DC Motors and 3 Channel Servos Motors Motor Driver for Micro bit BBC microbit Motor Driver Board

  • micro:bit edge connector, directly pluggable.
  • 2x DC motor interfaces, 3x servo interfaces.
  • Integrates 5V regulator, up to 3A output current.
  • Onboard multi connector options for DC motors in different specifications, onboard standard servo headers.
Check Stock

10 Pk. Juki Genuine Bobbins #40151627 for Domestic Sewing Machines

  • Pack Of 10 Juki Plastic Bobbins For Portable Sewing Machine..
  • For Juki models : HZL-80HP, HZL-70HW, HZL-60HR, HZL-357ZP, HZL-355ZW, HZL-353ZR and more..
Check Stock

Juki 5-Pack Metal Bobbins For TL-98, TL-2000, TL-2010 Series Sewing Machine

  • Original Genuine Juki Parts (Made In Japan).
  • Juki Bobbins Come in Sealed Juki Bags with Bar Codes / Do Not Accept unsealed Bags.
Check Stock

Spool Holder #A1119-644-000A for Juki MO-644D MO-654DE MO-655 Serger

  • Fits Juki models : MO-644D, MO-654, MO-654DE, MO-655.
Check Stock

JUKI Needle Screw #A1416777000 for MO-644D MO-654DE MO-735 Serger - 2 Pk.

  • Needle Set Screws for Juki Portable Serger..
  • Fits Juki models : MO-623, MO-644, MO-644D, MO-654DE, MO-655, MO-700, MO-735, MO-1000.
Check Stock

Juki Original - Industrial Single Needle Sewing Machine Bobbins - 25 Pack (Original Juki Part) Made in Japan

  • Pack Of 10 Juki Plastic Bobbins For Portable Sewing Machine..
  • For Juki models : HZL-G Series, HZL-F/HZL-QM Series, HZL-X Series Portable machines and more..
Check Stock