Top Kallista Spout

KWODE 8” Swivel Swing Nozzle Spout Replacement Kit for All Brand Commercial Kitchen Sink Faucet with M25*1.25mm Connector Size and 2.2 GPM Aerator, 360°Stainless Steel Add-on Spout Chrome Finish

  • ✅Commercial Faucet Spout Replacement: This 8 inch swivel spout is designed for wall mount or deck mount commercial faucet with M25*1.25mm connector size, 8" add on spout is designed for 1 or 2 compartment, please pay attention).
  • ✅8 inch Swivel Swing Nozzle Spout: 8 inch spout reach and 5.5 inch spout height, 2.2GPM Max water Flow, good design for wall mount or deck mount faucet even commercial pre-rinse faucet working on 1 or 2 prep & utility compartment sinks..
  • ✅360°Short Add-on Spout: lead free stainless steel constructed, polished chrome surface with high hardness and heat resistance characteristics. You can rotated the spout 360 degree by hand, easy to control and use..
  • ✅ Easy to Install and Remove: Max 2.2GPM, easy to install it, just remove the old one and install the new one less than 5 minutes by DIY installation. ( Tip: two gasket is already kept in connector side,just connect it no water tape at first.).
  • ✅ Reliable Quality Spout: Just 8 inch faucet spout only, no included commercial faucet, 12 months warranty for this swivel spout, any issue, please contact us from your order directly (the spout is good for KWODE, JZ,IM,MS commercial faucet, please make sure the connector size is M25*1.25MM, before you making the order.).
Check Stock

Gas Can Spout Replacement, Gas Can Nozzle ,(6 Kit-Yellow)suitable for most 1/2/5/10 gal oil cans. Durable. The thickened oil gas can cap and thickened gasket will give Update your old gas can

  • Update your Old Gas Cans and Water Jugs. This Spout Kit is made with prime HDPE (High Density Polyethylene) full of flexibility and unbreakable quality plastic material. Let's hit the roads & transform your old can with this FLEXIBLE REPLACEMENT GAS CAN SPOUT that can transfer fluids easily. Kool Products Gas Can Spout Replacement prevents you from spills by making it easy to bend the spout to reach any direction..
  • As shown in the picture the internal thread size is 1.7 inch, Suitable for most 1/2/5/10 gallon oil plastic cans. Please measure your oil tank mouth size before purchasing..
  • 3 Gas Spout including Rubber Gasket. Spout Length: Approx. 8.25”. Spout Fits on most of the cans out there. Our Blitz Gas Can Spout Replacement allows the Fuel flows out smoothly without using any over-engineered anti-spill devices. Our 5 Gallon Gas Can safety Spout is the best way to stop fuel shortcomings..
  • Screw Collar Caps (3 Yellow and 3 Black). The outer diameter including side ribs: 2.75". Please check dimensions of hole of your can. Our Universal Gas Can Spout is providing our customers to make their transport safe & comfortable..
  • stopper cap is used as a cap for the spout and also works as a stopper which fits perfectly ....
Check Stock

EZ-POUR® Replacement Wedco Vent and Spout Cap 2 pack - Update your Can!

  • DURABLE SPOUT: The rigid spout replacement is durable, and it can fit most water jugs and older gas can models. It is lightweight and made from high-quality plastic, making it easy to carry and durable enough to withstand years of activity..
  • EXTENDABLE SPOUT: Our gas can replacement spout comes with an 8 '' extension, allowing you to pour fuel into hard-to-reach areas. With this replacement spout, you will not have to worry about anything. Instead, it helps you to pour fuel easily, no matter how difficult it is to reach the gas tank..
  • COMPLETE PACKAGE: The rigid spout replacement bundle includes everything you will need to make storage and transportation of fuel easier for you. From durable spout to flexible spout, cap, replacement vent, flame arrestor, and secondary base cap, you will get everything in it..
  • UPDATE YOUR OLD GAS CANS: With the EZ-POUR gas can spout replacement bundle, you don't have to go through the trouble of replacing your old can. Instead, you can bring your old gas can back to its new condition with our universal bundle for easy storage and transportation of fuel..
  • NO MORE FUEL SPILLAGE: Our universal gas can spout replacement bundle allows you to transport or store fuel easily. Everything is included in this kit to ensure ....
Check Stock

EZ-POUR Replacement Spout - Water Jug Or Gas Can Spout - Update Your Old Can

  • Long Flexible Universal Spout - EZ Pour Gas Can Spout is a sturdy choice, made with an extra-dense material, something that will not get brittle and crack in the cold. This single spout is designed to ensure a fast flow, letting you spend less time in the cold and saving your time..
  • Lightweight And Durable - This gas can spout is lightweight and durable. You can easily attach it to most any gas and water cans for keeping spare gasoline or completing chores for your home or farm. With this gas spout kit, you can have your old gas cans feeling new. This kit is a unique spout, one 8 inch HI-FLO spout and another 8" Spout Extension for those hard-to-reach tanks. A 1/2” replacement push-in vent, filter screen, and second base cap to fit additional cans are also included..
  • Resilient And High-Quality Material - This universal kit includes one 8 inch HI-FLO Spout and one 8 inch extension. It does everything it says it will without a struggle..
  • Comes With Everything You Need - A universal gas can spout, and it comes with one 8 inch HI-FLO Spout and one 8 inch extension and the necessary accessories to hook them up. Yes, that includes the vents and screw caps. These spouts are great and will work on most cans..
  • Made From Extra Dense Material - We are focuse....
Check Stock

Enhon 2 Set Tub Spout Diverter Repair Kit, Includes 2 x Diverter Valve Stems, 2 x Cup Seals and 2 x Gates, Bathroom Shower Bathtub Leaky Faucet Repair Replacement Parts Replace

  • Universal Design: the tub spout diverter repair kit is designed for repairing most standard tub spouts, and features straight edges.
  • Nice tub spout repair replacement parts for faucet bathtub spouts.
  • Fix Your Leaky Tub Spout: our diverter replacement part can better solve your bathtub spout's leaking problems as a wonderful faucet diverter repair kit, preventing the water leaking from the other end of the spout.
  • Don't worry about broken or leaking bathtub faucet diverter spout anymore.
  • Detailed Materials: the value stem is made of hard metal materials, the diverter gate is made of durable plastic and the cup seals are made of wear resistant rubber.
  • Anyway, all the materials of the tub spout diverter repair kit will improve your bathtub diverter parts more construction, strength and durability.
  • Easily Install: first, use your spare screw driver to spread the two tabs apart which are locked onto the lift rod.
  • Second, remove the old diverter gate assembly parts, then take our shower tub spout diverter gate and place the cap seal into the spout gate.
  • Third, put the bath diverter gate with the rubber washer into t....
Check Stock

DANCO Bathroom Tub Spout with Front Pull Up Diverter, Chrome Finish, 1-Pack (88052)

  • CLASSIC DESIGN - The Danco tub spout is ideal for replacing and updating your worn-out, non-functioning tub spout and has a versatile design that ONLY FITS A THREADED PIPE connection.
  • it DOES NOT FIT a copper pipe slip-fit connection.
  • CONNECTION SIZE: This Danco diverter tub spout has ½ in. IPS inside threads and will fit a 4 in. – 4-1/2 in. stub out from tiled wall.
  • DIVERTER INCLUDED: This tub spout includes a front diverter lift rod to allow water stream to flow downward into the tub or upward into showerhead.
  • TUB SPOUT REACH: The bathtub faucet spout has a 5 in. reach.
  • BUILT TO LAST: The durable metal construction provides strength, longevity and will endure the rigors of everyday use.
  • BATHTUB SPOUT THREADED DIMENSIONS: The bathtub faucet spout metal threads measures 3-3/4 inch to threads from back of tub spout, so it is important to measure your stub out nipple to ensure it is at least 4 in. long.
  • HASSLE-FREE INSTALLATION: You will need adjustable pliers and plumber sealing tape to help prevent leaks and provide a better seal during installation. (VIDEO SHOWS MODEL INSTALLATION NOT THE EXACT SAME PRODUCT).
  • CHROME FINISH resists corrosion and tarnishing and will complement your existing bathroom fixtures.
Check Stock

Oil Can Transparent High Pressure Oiler Lubrication Oil Can Bottle Oiling Gun With Rigid & Flex Spout Thumb Pump Tool Oiler

  • DURABLE SPOUT: The rigid spout replacement is durable, and it can fit most water jugs and older gas can models. Additionally, it is lightweight therefore making it easier to carry. Finally, it is made from high-quality plastic, meaning it is less likely to break and this resistance means a longer life span..
  • COMPLETE PACKAGE: The rigid spout replacement and vent kit is a complete package. You won't need to buy another spout cap separately! The whole package includes a spout, cap, replacement vent, flame arrestor, gasket and secondary base cap..
  • NO MORE FUEL SPILLAGE: Our rigid spout replacement comes with a sturdy cap that allows you to transport or store fuel easily. If you are looking to update your old water jug or gas can, update it today with an EZ-POUR rigid spout replacement and vent kit, and no need to worry about any fuel spillage..
  • HIGHLY COMPATIBLE: Our EZ-POUR rigid spout replacement and vent kit is a perfect fit for most water jugs and pre-2009 gas cans such as Blitz, Briggs Stratton, Eagle, Essence, Gott, Igloo, Midwest, Rubbermaid, and Scepter cans, and many others. Due to its high compatibility, you don't need to change the spout type when using a different gas can every time, your time spent is important to us!.
Check Stock

KP KOOL PRODUCTS Retail Pack Flexible Replacement Gas Spout with 2 Screw Collar Caps(1 Fine & 1 Coarse - Fits Most Of The Cans), 2 Base Caps, 1 Stopper Cap and 1 Stainless Steel Filter/Flame Arrestor.

  • Made of Superior Plastic material with lifetime warranty. No other spout kit in the market can beat this quality. Let's hit the roads & transform your old can with this FLEXIBLE REPLACeMENT GAS CAN SPOUT that can transfer fluids easily. Kool Products Gas Can Spout Replacement prevents you from spills by making it easy to bend the spout to reach any direction..
  • Includes 8.70" Flexible long spout which is super flexible unlike other spouts available. Our Gas Can Spout helps get rid of inconveniences while travelling. Our Universal Gas Can Spout is providing our customers to make their transport safe & comfortable..
  • Includes lot of accessories such as Stainless Steel False arrestor/Filter solid particles and prevent any serious damage. Our Blitz Gas Can Spout Replacement allows the Fuel flows out smoothly without using any over-engineered anti-spill devices. Our 5 Gallon Gas Can Spout is the best way to stop fuel shortcomings..
  • 2 screw collar caps (fine and coarse threads - both collars have an inside dimension of 1 3/4") to use on most of the cans. Please check your container outside thread diameter before you place an order. One of the great ways to transform your old gas cans with a new touch. There's no reason to put away the rusty cans when ....
Check Stock

TNROTED 8 Inch Faucet Swivel Spout Replacement Kit for Commercial Kitchen Sink Faucet, 360° Commercial Faucet Swivel Spout with 2.2 GPM Aerator, Chrome Finish

  • Commercial Faucet Spout Replacement Kit: 8 inch faucet spout reach and 5.5 inch spout height, Swing spout connector size is M25*1.25mm female thread. This 8 inch swivel spout is designed for wall-mounted or deck mount commercial faucets. (please make sure your faucet connector size before you making the order).
  • 8 Inch Swivel Add On Spout: This 12” add-on spout is ideal for 1 or 2 bowls stainless steel prep & utility compartment sinks at home, restaurant and industrial kitchens, good design for wall mount or deck mount faucet..
  • 360° Swivel Faucet Spout: 10 inch swing spout can be rotated 360 degrees by hand, easy to control and use.
  • lead free stainless steel constructed, easy to clean、 durable and sturdy..
  • Easy to Install: 2.2 GPM max water flow. just remove the old one and install the new one less than 5 minutes by DIY installation. ( Tip: two gaskets are already keeping in the connector place, just connect it and no water tape.).
  • Guarantee: Amazon provides a 30-day free refund and 12 months replacement warranty. If you have any questions, please contact us from your order directly, we guarantee that we will answer and solve your problem within 24 hours..
Check Stock

EZ Pour Gas Can Spout Replacement Bundle – Includes Replacement Spout with Reducer Tip, Coarse Thread Base Cap Kit, Push-in Vent & Engine Oil Dipstick – Update Old Gas Cans (Deal of 4)

  • Long Flexible Universal Spout - EZ Pour Gas Can Spout is a sturdy choice, made with an extra-dense material, something that will not get brittle and crack in the cold. This single spout is designed to ensure a fast flow, letting you spend less time in the cold and saving your time..
  • Lightweight And Durable - This gas can spout is lightweight and durable. You can easily attach it to most any gas and water cans for keeping spare gasoline or completing chores for your home or farm. With this gas spout kit, you can have your old gas cans feeling new. This kit is a unique spout, one 8 inch HI-FLO spout and another 8" Spout Extension for those hard-to-reach tanks. A 1/2” replacement push-in vent, filter screen, and second base cap to fit additional cans are also included..
  • Resilient And High-Quality Material - This universal kit includes one 8 inch HI-FLO Spout and one 8 inch extension. It does everything it says it will without a struggle..
  • Comes With Everything You Need - A universal gas can spout, and it comes with one 8 inch HI-FLO Spout and one 8 inch extension and the necessary accessories to hook them up. Yes, that includes the vents and screw caps. These spouts are great and will work on most cans..
  • Made From Extra Dense Material - We are focuse....
Check Stock

EZ-POUR Rigid Spout Replacement and Vent kit for Water Jugs and Pre-2009 Gas Cans - Update your Old Cans | Includes Spout, Cap, Replacement Vent, Flame Arrestor, & Secondary Base Cap

  • DURABLE SPOUT: The rigid spout replacement is durable, and it can fit most water jugs and older gas can models. Additionally, it is lightweight therefore making it easier to carry. Finally, it is made from high-quality plastic, meaning it is less likely to break and this resistance means a longer life span..
  • COMPLETE PACKAGE: The rigid spout replacement and vent kit is a complete package. You won't need to buy another spout cap separately! The whole package includes a spout, cap, replacement vent, flame arrestor, gasket and secondary base cap..
  • NO MORE FUEL SPILLAGE: Our rigid spout replacement comes with a sturdy cap that allows you to transport or store fuel easily. If you are looking to update your old water jug or gas can, update it today with an EZ-POUR rigid spout replacement and vent kit, and no need to worry about any fuel spillage..
  • HIGHLY COMPATIBLE: Our EZ-POUR rigid spout replacement and vent kit is a perfect fit for most water jugs and pre-2009 gas cans such as Blitz, Briggs Stratton, Eagle, Essence, Gott, Igloo, Midwest, Rubbermaid, and Scepter cans, and many others. Due to its high compatibility, you don't need to change the spout type when using a different gas can every time, your time spent is important to us!.
Check Stock

EZ-POUR Rigid Spout Replacement Vent Kit | Update Your Old Gas Cans with Hi-Flo System & 8\ Extension | Multi Use Flexible Water Jug Spouts for Jerry Can | Spouts, Cap, Flame Arrestor & Secondary Cap

  • Long Flexible Universal Spout - EZ Pour Gas Can Spout is a sturdy choice, made with an extra-dense material, something that will not get brittle and crack in the cold. This single spout is designed to ensure a fast flow, letting you spend less time in the cold and saving your time..
  • Lightweight And Durable - This gas can spout is lightweight and durable. You can easily attach it to most any gas and water cans for keeping spare gasoline or completing chores for your home or farm. With this gas spout kit, you can have your old gas cans feeling new. This kit is a unique spout, one 8 inch HI-FLO spout and another 8" Spout Extension for those hard-to-reach tanks. A 1/2” replacement push-in vent, filter screen, and second base cap to fit additional cans are also included..
  • Resilient And High-Quality Material - This universal kit includes one 8 inch HI-FLO Spout and one 8 inch extension. It does everything it says it will without a struggle..
  • Comes With Everything You Need - A universal gas can spout, and it comes with one 8 inch HI-FLO Spout and one 8 inch extension and the necessary accessories to hook them up. Yes, that includes the vents and screw caps. These spouts are great and will work on most cans..
  • Made From Extra Dense Material - We are focuse....
Check Stock