Top Kayak Bilge Pumps 2

AMRJ-32503 Mayfair Cartridge Bilge Pump - 500 GPH

  • Mayfair Cartridge Bilge Pumps make cleaning and maintenance easy! Cartridge Bilge Pumps can be removed for cleaning or replacement without the use of a single tool..
  • Lift a tab on the top, give the cartridge a twist, and pull it out.
  • that's all there is to it! Includes all-in-one motor/impeller unit with no loose parts. Feature a thermoplastic body, lip seal shaft seal and a stainless steel motor shaft..
  • 12V cartridge bilge pump with high impact housing. Easy installation and increased longevity. Corrosion, chemical and fuel resistant..
  • Permanent magnet motor along with permanent lubrication. T-Slot for easy float switch attachment.
  • 500 GPH, 3/4" Outer diameter discharge port, 5 Amp Fuse Size. Picture shows the 1000 GPH pump..
Check Stock

Attwood 4608-7 Tsunami T800 Bilge Pump, 800 GPH, 12-Volt, Barbed ¾-Inch Diameter Outlet, 29-Inch Wire

  • What you will get: the package contains 1 piece of 12 V boat bilge water pump and 1 piece of automatic boat bilge pump float switch, nice combination for you to drain the water easily.
  • Basic parameters: the flow of the pump is 1100 gallons per hour, the flow rate is 1100 GPH, the voltage is 12 V DC, and the head is 13 ft (4mts).
  • Outlet diameter: 1-1/8 inch/ 29 mm, cable length: 3.3 ft/ 1 m.
  • The float switch's max amps 12 volts: 20 A.
  • The wire length is 3.3 ft/ 1 m, the wire gauge size is 18 AWG.
  • Electric bilge pump: the electric bilge pump is great for you to drain water efficiently, which has a good motor and help drain the water efficiently.
  • It is a good forhydraulic systems fed with cold water and can be applied in line to be fed by gravity or pressure.
  • Automatic boat bilge pump float switch: the float swith is automatic, it will turn the boat bilge pump on when water level reaches 2 inch (51 mm), and it will turn the pump off when water level reaches 0.7 inch (19 mm).
  • It is good flow sensor for bilge pumps, and it features with a removable base for easy cleaning.
  • Wide range of application: the boat bilge pump and automatic float switch can be applied for fishing boats, cruisers, runabouts, yachts and mo....
Check Stock

Premium Bilge Cleaner Concentrate for Boats Marine Boat Cleaner Soap Grease Oil Fuel and More

  • POWERFUL CONCENTRATE CLEANS BILGE AND REMOVES ODORS: Our bilge cleaner is a powerful oil eater that emulsifies boat oil, grease and transmission fluid to keep your bilge clean and odor-free. Simply pour in bilge pumps for boats and our oil eater cleaner degreaser works for emulsifying and deodorizing the bilge tank and bilge hose. This bilge degreaser super cleaner bilge pump cleaner dissolves fuel, sludge, scum and transmission fuel to keep your bilge pump operating smoothly and efficiently!.
  • EMULSIFIES & ELIMINATES GREASE & OIL: This oil eater degreaser works as a super clean degreaser for the inside of your bilge! Bilge pump boat juice is an essential staple to your boat cleaning supplies kit to keep your sludge pump odor free and running properly. Our concentrated oil eater cleaner and degreaser maintains a proper working marine bilge pump and boat bilge pump without harming fiberglass, plastic or metal on your boat. Regular use keeps an automatic bilge pump running smoothly..
  • FAST & EASY TO USE: Simply pour in and run boat for at least one hour. The natural motion of the boat works to scrub the bilge. Then drain or pump out into a container that is in accordance with the law. Repeat process until no sludge remains. To maintain, repeat process once....
Check Stock

Whale BE9003 Electric Field Sensor Switch, 12V or 24V, Suitable for Up to 20 Amps

  • Precision switch automatically activates and shuts off bilge pumps when water reaches specific levels.
  • Worry-free, precise operation ensures proper bilge pumping and provides peace of mind.
  • Automatically activates bilge pump when 2 inches of water is sensed.
  • Turns pump off when water level drops below ½ inch.
  • Two color-coded wires make installation easy.
  • Two test circles can be used to ensure activation.
  • Offers side or base mounting, can operate with 12V or 24V power, and it is suitable for up to 20 amps.
Check Stock

Rule 500 GPH 25SA Electronic Sensing Bilge Pump-500

  • Head: 4.0M, Wire Lead: 1M, Outlet Dia: 29mm(1-1/8"), Dimension: 5.92“*4.21"/150.5mm*107mm..
  • 【Switch】Built-in float switch: No float switch required.Pump turns on when water level rises & shuts off when water is removed. Snap-off strainer for easy cleaning.
  • 【Long life motor】 :Water cooled motors for long life, with anti airlock design and moisture tight seals.Heavy duty motors with stainless steel shafts and tough thermoplastic bodies..
  • 【Durable】: All (Auto) Bilge Pumps are built with compact, rust and corrosion protected stainless steel shaft, high-impact durable and thermoplastic ABS plastic housing..
  • 【Fast Speed】When water level rises,pump can turn on bout 1 1/2 inch when it’s sitting in the bottom of the bilge at the back of the boat. It definitely pumps the water out fast! 5 Gallons underneath motor and the pump spit it out in about 20 seconds..
Check Stock

Johnson Pumps - 22102 PROLINE Bilge Pump 1000 GPH 2.5A

  • No one wants to worry that their boat is slowly taking on water because the bilge pump has failed. Well, you can sleep soundly with the reliable 2000 bilge pump on the job.Small size, high efficiency, low current (low cost switching power supply supporting).
  • to achieve a small size perfect combination of high flow..
  • It is non-automatic and must be paired with a float switch or sensor and ON/OFF/AUTO switch. Unique automatic "discharge" function can bear the long-term continuous operation under nearly congestion condition Impact resistant ABS housing.
  • Used in a boat,you can also use it in solar powered waterfall for your backyard, in a battery back-up sump system,etc. It empties the bilge roughly 25% faster than 1500gph bilge pump,and will continue to pump even when it encounters some minor debris.
  • Heavy duty motors with stainless steel shafts and tough. thermoplastic bodies submersible bilge pumps are tough enough for any bilge.Tough, efficient, long life motor.Offer high capacity output Water cooled long-life motors.
  • Ignition protection Water/moisture tight seals.
  • Snap lock strainer base for easy installation and removal.
Check Stock

H8eraide Bilge Cleaner - Eco Friendly Non-Foaming Boat Bilge Cleaner - Leaves Your Bilge Clean and Deodorized

  • ✔️THINK ABOUT WHAT YOU ARE PUTTING IN THE WATER - H8eraide has produced a 100% biodegradable Bilge Cleaner for boats that works. Our competitors do not care about the harmful effects of their cleaners, but we want to change YOUR OUTLOOK. Think before you clean and use boat cleaners that not only work but are safe! You will feel good about your boat cleaning!! Our bilge cleaner for boat is 100% biodegradable, non-foaming and safe on all bilge pumps!.
  • ✔️HELP US FIGHT CANCER! -Profits are donated to the H8 Cancer foundation to help find a cure for all types of cancer in our lifetime. Not only are you getting a great bilge cleaner you are helping a great cause!.
  • ✔️ ULTIMATE BILGE CLEANER & DEODORIZER - Our patented technology removes gunk and grime from your boat bilge easily!. Works on any boat as a great way to get a clean bilge. The only way to clean your boat is with H8eraide Bilge Cleaner!.
  • ✔️ECO-FRIENDLY! -Our Environmentally Safer formula contains no unnecessary ingredients and is 100% biodegradable per OECD guidelines. Phosphate-Free, Contains no artificial fragrances, no dyes, no thickening agents, no chelating agents, no NPE or SLS surfactants, and no solvents..
  • ✔️ - If our product does not meet your expectations reach out to us....
Check Stock

Seachoice 12101 2-Position Boat Toggle Switch – Off/On

  • Suitable for many general applications including operation of lights, bilge pumps, blowers and baitwell pumps.
  • Single pole, single throw off/on toggle switch.
Check Stock

Rule 3003.7351 Bilge Pump Motor Cartridge 700 GPH

  • Fits Rule Cartridge and Bilge Live well/Aerator pumps.
  • Fuse Protection: 5A (fuses sold separately).
  • Works with Pro-Series Live well pumps (now discontinued).
Check Stock

Rule Marine Tournament Series Livewell Pump 800 GPH

  • Fits Rule Cartridge and Bilge Live well/Aerator pumps.
  • Fuse Protection: 5A (fuses sold separately).
  • Works with Pro-Series Live well pumps (now discontinued).
Check Stock

Gearlab Deck Pod 2 - Kayak Deck Bag, Deckhand system (Holds Paddle Float, Bilge Pump) (Black)

  • Deck Pod 2 carries hydration, snacks, gadgets, and safety equipments organized on deck and close to hand for your kayak trips..
  • Deckhand is a revolutionary deck fastening system designed and developed by Gearlab Outdoors. It enables fast and secure attachment to kayak deck lines for quick transport and deployment..
  • Quick Access Pouch - Mesh holding pocket for quick access to navigation devices with multiple handy anchor points..
  • Newly Improved Paddle Float & Bilge Pump Access - The new lock and strap design makes essential quick access and storage easier than ever..
  • Same Big Volume, Lower Profile - 6L of storage for your hydration pouch, energy bars, and other paddling companions..
Check Stock

DasMarine 1100GPH 12V 3.2 AMP 5.0 AMP Fuse 29mm ID Hose Electric Marine Submersible Bilge Sump Water Pump for Boat Yacht

  • hose barb discharge outlet:1-1/8 inch (29millimeter).
  • 2. Fully submersible electric pump.Small size, high efficiency, low current (low cost switching power supply supporting).
  • 3.Heavy duty motors with stainless steel shafts and tough. thermoplastic bodies submersible bilge pumps are tough enough for any bilge.
  • 4.Snap lock strainer base for easy installation and removal.
  • 5.Silent and vibrationless operation. Stainless steel shaft, completely submersible, rust and corrosion protection, need a separate float switch.
Check Stock