Top Kenwood Excelon 1inch Sub

Kenwood Excelon XR-W10F 10 4-ohm Oversized Slim Subwoofer with Peak Power of 1200 Watts

The Kenwood Excelon flat subwoofer design is approximately 40% slimmer (less deep) than a standard subwoofer. This makes it ideal for installation in....
The carbon-glass fiber cone uses a honeycomb design which is simultaneously efficient and durable..
The spring post terminals on one side of the woofer connect to your amplifier's wiring. The posts will accept pin connectors, single or dual banana....
The woofer features a smooth linear rubber surround for added durability and increased excursion resulting in exceptional deep bass response..
The XR-W10F features a dual ventilation system designed specifically for its slim-design..

Kenwood recommends a sealed enclosure volume of 1.25 ft³ (0.8 ft³ to 1.8 ft³ acceptable)..
Sealed enclosures provide the most control over a woofer, will handle a lot of power, and provide accurate sonic reproduction, making them suitable....
Kenwood recommends a ported enclosure volume of 1.5 ft³ (1.2 ft³ to 2 ft³ acceptable) with a 12¾" wide x 1⅜" tall x 29" long slot port..
The spring post terminals will accept pin connectors, single banana plugs, or bare wire up to 10-gauge..
The KFC-XW1241HP sub features a two-piece polypropylene cone with the rigidity you need to minimize distortion for maximum impact. This 4-ohm sub....

The Kenwood Excelon P-XW1221S ported subwoofer enclosure features a single heavy-duty 2Ω, 12" driver that can handle 500W RMS with peak power up to....
The injection-molded Polypropylene cone features a dual area cap that provides the rigidity needed for high-power handing while delivering accurate....
Extra thick legs support the weight of the system when installed in a down-firing application. This ensures the low frequency energy is transmitted....
The P-XW1221S is constructed of 5/8" thick MDF (Medium Density Fiberboard) with a 3/4" thick baffle, providing outstanding strength and durability for....
The P-XW1221S includes a single pair of nickel-plated spring-post connectors that can accept speaker wire up to 8AWG..

The Kenwood Excelon P-XW1221DHP ported subwoofer enclosure features 2 heavy-duty 12" drivers, internally wired for a 2Ω output, that can handle....
The injection-molded Polypropylene cones feature a dual area cap that provides the rigidity needed for high-power handing while delivering accurate....
Extra thick legs support the weight of the system when installed in a down-firing application. This ensures the low frequency energy is transmitted....
The P-XW1221DHP is constructed of 5/8" thick MDF (Medium Density Fiberboard) with a 3/4" thick baffle, providing outstanding strength and durability....
The P-XW1221DHP includes a single pair of nickel-plated spring-post connectors that can accept speaker wire up to 8AWG. The total output impedance at....

Kenwood KFC-6965S 6x9" 800 watt 3-way car audio coaxial speakers stereo (4-pack).
Rms power: 45W (90W per 4-pack), impedance 4 ohms.
Tweeter: 2inch pei balanced dome tweeter.
Super tweeter Features: 1inch ceramic tweeter.

PERFORMANCE: Multi Layer polypropylene cone with KENWOOD Designed X-Motif for delivering powerful and solid bass.
Sealed Enclosure Internal Volume: 1.25 Cubic Feet, Ported Enclosure Internal Volume: 1.5 Cubic Feet.
5-3/8 Inch Mounting Height, 11-1/8 Inch Mounting Hole Diameter.
Dimensions: Length 13" X Wudth 13" X Height 6.125.
Closed Yoke with Advanced Airflow Control: Sub has a robust thermal management system implemented with an Aluminum Bobbin, Closed Yoke Design, and....

PERFORMANCE: Multi Layer polypropylene cone with KENWOOD Designed X-Motif for delivering powerful and solid bass.
Sealed Enclosure Internal Volume: 0.65 Cubic Feet, Ported Enclosure Internal Volume: 0.9 Cubic Feet.
4-7/8 Inch Mounting Height, 9-1/16 Inch Mounting Hole Diameter.
Dimensions: Length 11″ X Width 11″ X Height 5-5/8 inch.
Closed Yoke with Advanced Airflow Control: Sub has a robust thermal management system implemented with an Aluminum Bobbin, Closed Yoke Design, and Advanced Airflow Control.

This IMC Audio speaker and power wire harness allows for quick and easy installation. It plugs directly into the back of select Kenwood Stereo. These wire harnesses are ideal when you have lost or damaged the original wire harnesses that came with your aftermarket stereo. See compatibility below for the exact models they fit..
This wire harness is compatible with the following stereos made by Kenwood. The radios that it is compatible with are Kenwood DDX9705S, Kenwood DDX9904S, Kenwood DDX9905S, Kenwood DMX7704S, Kenwood DMX7705S, Kenwood DMX905S.
IMC Audio pre-strips the ends of their wire harnesses to make installation simpler and easier. No more finding a pair of wire strippers just to cut the ends of the plastic off the wires. Utilizing high grade ABS plastic and CCA wire, these harnesses will last for the lifetime of your stereo..
Each wire harness follows the EIA color-code to make connecting the harness simple. The colors of the wires match the colors of the original wire harness that came with your stereo. The wires are 18 gauge and 6 inches long, providing plenty of length to connect to your vehicles harness..
Each package contains a wire harness to plug into the back of the above mentioned Kenwood Stereos. The wires are connected to your vehicl....

The Kenwood DDX9707S features a 6.95" widescreen (16:9) clear resistive touchscreen LCD with LED backlighting. The clear resistive touchscreen LCD....
Apple CarPlay is a safer way to use your iPhone in the car. Simply talk to Siri or touch the receiver’s display to get directions from Apple Maps,....
The Kenwood DDX9707S offers 8 EQ Presets for easy adjustment, a 13-band EQ for customized tuning, and a Drive EQ mode to overcome road noise. Separate....
The Kenwood DDX9707S is equipped with built-in Bluetooth 5.0 allowing you to make and receive phone calls wirelessly through the receiver.
Android Auto was designed with safety in mind, helping you to minimize distractions and stay focused on the road. KENWOOD’s multimedia receivers....