Top Key Housing Sleeve

Rear Floorboard Foot Peg Pedals,Adjust Floorboards,Rear Passenger Footboards Footrest Foot Pegs For Harley Sportster 883 1200

  • Stylish chrome piece switch housing with smooth lines.
  • Includes (1) left upper and lower housing, (1) right upper and lower housing, and (1) hardware kit including: (4) 10-24 x 1/2" torx bolt, (4) split....
  • Suggested tools for installation (not included): T25 and T27 torx wrench, SAE hex key set, phillips screwdriver, silicone sealant, and a torque wrench.
  • Compatible with Harley-Davidson models: '14-'19 Electra Glides, Road Glides, Road Kings, Street Glides and Trikes.
Check Stock

2 Pack Replacement Key Fob Case Shell Fit for Honda Accord Crosstour Civic Odyssey CR-V CR-Z Fit 3 Buttons Keyless Entry Remote Car Key Cover Housing Casing Only

  • NO NEED to CUT KEY,EASY to USE: Easy installation which does not require reprogramming. Simply swap your existing electronics inside this key shell and install your original key to this key case..
  • EXCELLENT REPLACEMENT KEY FOB CASE: A brand new replacement case shell for selected honda vehicles. No electronics or circuit board are included..
  • DURABLE REPLACEMENT KEY SHELL: This key shell replacement is constructed with high quality materials for long lasting durability..
  • COMPATIBILITY: If your existing key remote shell looks IDENTICAL with the one showing in the pictures,this key casing will fit.Please notice that this key housing replacement doesn't have a chip holder..
  • This is a replacement key case. No electronics are included..
Check Stock

Polaroid Underwater Housing for Point & Shoot with Lens

  • Rugged Housing Provides Full Access To Virtually all Camera Key Controls And Features.Dimensions -5 x 3.5 x 2.5" (12.7 x 8.89 x 6.35 cm).
  • Sealed Gasket Design For Added Protection From Water And The Elements.
  • Housing Optimized For Underwater Flash Use. Compatible with Canon SD series cameras, Nikon S series cameras, and Sony W and T series cameras.
  • Protects Virtually Any Ultra Compact Lens Camera.
Check Stock

Kuryakyn 1748 Motorcycle Handlebar Accessory: Hand Control Switch Housings for 2008-19 Harley-Davidson Motorcycles, Chrome, 1 Pair , black

  • Stylish chrome piece switch housing with smooth lines.
  • Includes (1) left upper and lower housing, (1) right upper and lower housing, and (1) hardware kit including: (4) 10-24 x 1/2" torx bolt, (4) split lock washers, (1) spring, (1) thumbscrew, (1) throttle hold clip, (2) E-Clips, (2) cable hole plugs.
  • Suggested tools for installation (not included): T25 and T27 torx wrench, SAE hex key set, phillips screwdriver, silicone sealant, and a torque wrench.
  • Compatible with Harley-Davidson models: '14-'19 Electra Glides, Road Glides, Road Kings, Street Glides and Trikes.
Check Stock

1 to 1-1/8 inch 1/4 Key Gas Engine Pulley Crank Shaft Sleeve Adapter Predator

  • This steel shaft sleeve adapts a crankshaft from 1” to 1-1/8” diameter. It comes with 1/4“ stepkey..
  • Works with Gas Engine Crank Shafts to enlarge the crank diameter to fit pulleys, gear boxes etc..
  • Part’s specification:Sleeve inside diameter 1”,Sleeve outside diameter 1-1/8”.
  • Sleeve length is about 3”,Sleeve Keyway slot 1/4”,Step Key Length is about 2”.
  • The sleeve and step key are designed to slip fit on your 1” diameter crankshaft with 1/4” keyway and enlarge it to 1-1/8 diameter with 1/4”....
Check Stock

Broan 509S Through-Wall Fan with Integral Rotary Switch, 8-Inch 180 CFM 6.5 Sones

  • Includes on/off rotary switch – no wall switch to wire.
  • Housing adjusts to fit walls from 4-1/2-Inch to 9-1/2 thick and has a 8-3/8-Inch diameter sleeve.
  • Built in damper minimizes back drafts for energy efficiency.
  • Housing adjusts to fit walls from 4-1/2 inches to 9-1/2 thick and has a 8-3/8-Inch diameter sleeve.
  • Built in damper minimizes backdrafts for energy efficiency.
Check Stock

Royal 79101t Classic Manual Typewriter (mint Green)

  • Royal Classic portable manual typewriter includes manual.
  • Sturdy retro metal housing for durability.
  • Pre-installed black/red ribbon, and paper support bar.
  • Full size keyboard, 44 keys, 88 symbols and Pica 87 font.
  • Spacebar repeat key, variable line spacing and ribbon selector.
  • Impression control, tabulator key, margin stops, space repeater, and 11” maximum typing width.
  • 1-year Limited Manufacturer's Warranty, imported.
Check Stock

Master Lock - (3) Keyed Alike Trailer & Multi Purpose Padlocks, 37KA-3

  • APPLICATION: These padlocks are ideal for all outdoor applications when needing multiple locks that utilize ONLY one key. The #37 latch lock works well on 1-7/8 and 2 inch couplers and on virtually all standard hasp applications. These locks have a removable shackle sleeve. Sleeve off - Secures coupler latches. Sleeve on - Works best with hasps. KEY RETAINING - ensures that padlock is not left unlocked..
  • PADLOCK FEATURES: 1-9/16"(21mm) wide x 3"(76mm) high. Armored Shackle Guard blocks bolt cutters. Revolving, case-hardened steel shackle sleeve resists cutting and sawing. Removable shackle sleeve. Sleeve off - Secures coupler latches to accommodate openings 9/32" (7mm) in diameter. Sleeve on - Works best with hasps, fits openings 1/2" (13mm) in diameter or larger. Precision pin tumbler mechanism resists picking..
  • IMPORTANT NOTE: If using this style lock on a trailers coupler latch please be aware it is NOT recommended for all 2-5/16 couplers. It will fit some 2-5/16 couplers, the exception being 2-5/16 couplers that have the latch partially recessed from the top surface of the coupler, or latches ....
Check Stock

INTBUYING Heavy Duty Water Filter Housing Whole House Water Purification of 304 Stainless Steel -10inch Filter 3/4inch NPT

  • Material：This housing is made of high quality 304 thicken stainless steel, corrosion resistant. heat resistance, pressure resistance, good wear resistance.
  • Applicaiton：This filter housing is for use in various applications, including residential drinking water filtration, food service, and humidifying systems, among others..
  • Fliexblity：Fit for 10" double open-ended (DOE) cartridges, 3/4" NPT inlet and outlet..
  • Duralbility：Maximum temperature: 200℉/97℃, Maximum operating pressure :72 PSI. Maximum flow rate: 6 GPM.Design for high pressure and hot/cold water..
  • Package Size: 14.57*6.69*6.69in. PACKAGE- Included: 1*stainless steel Filter housing, 1*bracket, 1*key wrench. Weight：4.07LB.
Check Stock

2-Pack Faraday Key Fob Protector for Car Remote Key Security. Technically Advanced Faraday Bags Key Fob Signal Blocker. Anti-Hacking RFID Key Fob Protector Faraday Pouch. Antitheft Products by POWR

  • WORKS AS A FARADAY CAGE. POWR carbon fiber faraday key fob protector will protect your vehicle from theft. Place your remote starter inside our car key case RFID pouch to stop hackers from stealing your car.
  • MAXIMUM SIGNAL BLOCKING. Our RFID key fob protector is mini but mighty, with a technically advanced dual mesh nano lining to block RFID, NFC, WiFi, Bluetooth, GPS, GSM & LTE signals, creating the ultimate Faraday shield key holder around anything sealed inside.
  • PROTECT YOUR SPARE KEY. Our key fob signal blocker comes with 2 packs of faraday bag for key fob so you can protect your spare key too. More mobile than a car key signal blocker box, our key fob signal blocking pouch also keeps key safe from physical damage.
  • FITS ALL KEY FOBS. Our faraday pouch key protector fits 99% of key fobs. Wrapped in multi-layered RFID shielding within polymer housing, with wear-resistant, double stitched outer layer. Car key pouch RFID blocker doesn’t need to sacrifice style.
  • THE POWR OF INNOVATION. More than just a key safe. POWR’s faraday key fob protector offers an elegant solution that’s been extensively tested for durability & function, so we offer a 90-day guarantee that can be extended to 12months.
Check Stock

Abloy Protec deadbolt ME153 PROTEC/Single Cylinder w/Thumbturn/with 3 Keys and ID Card

  • Bolts are adjustable for either 2-3/4 or 2-3/8″ backsets.
  • UL listed products. Case hardened steel cylinder housing .Single cylinder with Thumbturn with ABLOY PROTEC cylinder mechanism..
  • CAN ALSO BE MASTER KEYED AND KEYED ALIKE.
  • ABLOY PROTEC features long lasting legal and physical protection against unauthorised key duplication, a full metal, colour coded key with a lifetime warranty against breakage in normal use, and the recognised ABLOY attributes of physical security and durability..
  • ABLOY PROTEC is SCEC Endorsed for Secure Area Applications. The strong, one-piece metal key ensures against expensive on-going key replacement, and the absence of pins and springs provides unmatched resistance to wear and corrosion of internal parts. ABLOY products are built to last..
Check Stock

Oh L'amour - Thomas Tank Engine Sleeve

  • Material: stainless steel 304. The crankshaft is made of stainless steel, which is more durable than ordinary iron products. Never rust, better protect the crank..
  • Bushing inner diameter 5/8", outer diameter 3/4", sleeve length about 3", keyway 3/16', stepped key length about 3".
  • The sleeve key and stepped key are designed to fit perfectly into the 3/16-inch keyway and fit on a 5/8-inch diameter crankshaft, and enlarged to 3/4-diameter through a 3/16-inch key seat.
  • Replace motors with shafts of different diameters, and replace pulleys with different speeds or belts..
  • Used in conjunction with gas engine crankshafts to enlarge the crank diameter to fit pulleys, gearboxes, etc..
Check Stock